Electrical Fuses

Surface Mount Fuse is RoHS compliant.
Electrical Fuses

Surface Mount Fuse is RoHS compliant.

UMT 250 SMD fuse offers breaking capacity of 200 A at 250 or 277 Vac, or 100 A at 125 Vdc over current range of 315 mA to 4 A. Measuring 10 x 3 x 3 mm, unit replaces traditional axial or radial lead through-hole fuses, and is solder immersion compatible according to IEC 60068-2-58. Clear marking of rated currents make it suitable for pick and place operations in manufacture of power supplies,...

Read More »
Fuses are offered in lead-free versions.
Electrical Fuses

Fuses are offered in lead-free versions.

Designed to withstand high temperatures associated with lead-free wave soldering, lead-free fuses are available in 2AG, SAG, 3AB, and 5 x 20 mm form factors. Fuses comply with electronic industry manufacturing standards for lead-free circuit board content including IEC 60068-2-20, EIA-IS-722 (Low Voltage Supplemental Fuse Qualification Specification), and RoHS. All have CSA and UL approvals.

Read More »
Electrical Fuses

Power Delivery Solutions suit manufacturing automation market.

Power Delivery Solutions protect switched mode dc power supplies against load failures by isolating overloads or short-circuit occurrences from active elements in control panel. WAVEGuard electronic fusing system prevents load failures from propagating back to dc power delivery system, prevents drops in dc power to control panel, and eliminates nuisance-tripping. Solutions also include diode...

Read More »
Electrical Fuses

Fuses offer optional permanent fuse indication.

While providing Class J and RK1 circuit protection, Low-Peak® series facilitates troubleshooting by helping to locate open fuse. Indicator is either black or white to eliminate second-guessing. Products reduce available energy to faulted circuits, provide selective coordination, and minimize arc-flash and arc-blast hazards. Available series include LPJ_SPI, rated 600 Vac, 6-600 A;...

Read More »
Surface Mount Fuses target consumer electronics.
Electrical Fuses

Surface Mount Fuses target consumer electronics.

Available in industry standard 0402, 0603, and 1206 chip sizes, fast-acting fuses provide overcurrent protection on systems using dc power sources up to 125 Vac. They have clear time characteristics of 4 hours min at 100% of rated current, 5 seconds max at 250% of rated current, and 0.05 seconds max at 400% of rated current. Featuring monolithic, multilayer design, RoHS-compliant devices offer...

Read More »
Fuses minimize arc-flash and arc-blast hazards.
Electrical Fuses

Fuses minimize arc-flash and arc-blast hazards.

Low-Peak® Fuses, with optional permanent replacement fuse indication, speed troubleshooting by locating open fuse. Indicator is either black or white, so there is no second guessing. Fuses provide Class J and RK1 circuit protection, time-delay overload protection, and 300,000 A interrupting rating for all commercial and industrial applications. When properly sized and coordinated, units...

Read More »
Fuses meet RoHS requirements.
Electrical Fuses

Fuses meet RoHS requirements.

Surface-mount, RoHS (Restriction of Hazardous Substances)-compliant NanoÂ-² fuses feature gold finish on nickel-plated brass caps. They are available in subminiature and miniature formats, including very fast-acting, fast-acting, Sio-Blo® (time delay), UMF, 250 V UMF, and surge-resistant versions. With 100% tin finish, RoHS-compliant PICO II subminiature axial-lead fuses are available...

Read More »
SMT Fuse designed for use in hand held devices.
Electrical Fuses

SMT Fuse designed for use in hand held devices.

Built according to UL 248-1, surface-mount USF 1206 has interrupt rating of 50 A at 63 Vdc across entire range and is cURus-approved. Thin-film, chip fuse measures 1.6 x 3.20 x .6 mm and incorporates legend marking that provides visible indication of ampere rating. Product is lead-free, including fusing element, and exhibits resistance to soldering heat at 260°C/30 seconds according to...

Read More »
Time Delay Fuses protect inductive components.
Electrical Fuses

Time Delay Fuses protect inductive components.

Fusetron® Dual-Element Fuses provide branch circuit, short-circuit, and ground fault protection. When sized properly, they also provide overload protection. Time delay feature makes it possible to use fuse ampere ratings that are much smaller than those of non-time-delay fuses. When used in circuits subject to surge currents such as those caused by motors and transformers, fuses can be...

Read More »
Fuses protect electronic motor controllers.
Electrical Fuses

Fuses protect electronic motor controllers.

High-Speed Class J (HSJ) fuses are UL 248-8 Listed and deliver both branch circuit protection as well as high-speed protection necessary to protect drives' and soft-starters' internal electronics. Capable of clearing overloads down to 135% of their rating, fuses work seamlessly with existing Class J fuse blocks and holders. They are available in ratings from 15-600 A with 200 kA interrupting...

Read More »

All Topics