Drill Bits

Drill Bits

Ulterra PDC Drill Bit Saves Operator Over $500,000

FORT WORTH, Texas - For the first time, a single Ulterra bit has drilled the entire intermediate section of the Tattoo field, located in Northwest Canada. An 8.5 (216mm) U513M drilled both the vertical and build sections with the same bottom hole assembly, saving the operator two trips and $72 per-meter versus the best offset and $570,000 when compared to the average of six section offsets in the...

Read More »
Drill Bits

Diamond Coring Bit is effective in hardest ground conditions.

Along with cutting matrix that enables penetration of hard rock formations in extreme conditions, 10UMX(TM) features Stage(TM) waterway design. Geometry of windows sustains integrity of bit through its entire life, allowing for variety of crown heights. Twin-Taper(TM) design improves surface flushing, forcing debris through windows while keeping bit face clear and reinforcing inner diameter....

Read More »
Exchangeable Tip Drill offers optimized chip control.
Drill Bits

Exchangeable Tip Drill offers optimized chip control.

Designed for intermediate hole-tolerance area of IT9-IT10, CoroDrill 870 can be tailored to optimize applications through diameter range, steps, and length possibilities. Secure interface between drill body and tip ensures precision, while quick tip change helps maximize active machining time. Drill is available in 0.472-0.826 in. diameter range and lengths 3x and 5x hole diameter as standard.

Read More »
Deep-Hole Drill minimizes need for pecking cycles.
Drill Bits

Deep-Hole Drill minimizes need for pecking cycles.

Characterized by parabolic flute profile, Walter Titex UFL® A1549TFP employs helix angle of 40°, optimizing rigidity. In many applications, drilling to depth of 10-12 x D without pecking is possible. Drill's HSS-E 5% cobalt content substrate provides heat resistance, while TiAIN tip coating boosts cutting parameters and tool life, and U form point geometry promotes chip formation....

Read More »
Ulterra Bit Sets Record in the Granite Wash
Drill Bits

Ulterra Bit Sets Record in the Granite Wash

FORT WORTH, Texas - A new 12.25-inch U616M, six-blade matrix PDC bit with 16mm cutters recently set a Roger Mills County footage record in western Oklahoma. The Ulterra bit drilled 7,065 ft. from surface casing down to a depth of 8,115 ft., saving the operator an estimated $44,500 versus the closest offset and $88,500 versus the average of five offset wells. This generation U616M is the result of...

Read More »
Drill Bits

National Diamond, Premier Online Diamond Blades Supplier, Offers up to 40% Discount on Best Selling Diamond Blades

National Diamond, a US-based manufacturer and online supplier of diamond blades and other diamond tools, invites customers to take advantage of discounts on select products. Enjoy savings of up to 40% on diamond blades and other diamond tool supplies. US-based manufacturer & distributor of diamond saw blades, National Diamond, invites retailers, suppliers and contractors to take advantage of...

Read More »
Extra Long Drills feature 4-margin geometry for stability.
Drill Bits

Extra Long Drills feature 4-margin geometry for stability.

Featuring 137° point angle, Power-Phoenix Drills are designed for deep hole applications in steel, stainless steel, cast iron, aluminum, and titanium. Unique point grind ensures consistent chip formation, while polished flutes allow for rapid chip evacuation. Available in 1.0-12.7 mm diameters for 16 x D version and 2.0-10.0 mm diameters for 20 x D, 25 x D, and 30 x D versions, drills have...

Read More »
Solid Carbide Drill delivers optimized chip evacuation.
Drill Bits

Solid Carbide Drill delivers optimized chip evacuation.

Used for steel drilling, CoroDrill® 860 comes in lengths 3-8xD and offers optimized chip evacuation control. Design accommodates conventional drilling, chamfered holes, inclined surfaces, cross holes, stack drilling, and convex/concave surfaces. When using high cutting data in long and short chipping materials, drill provides consistently problem-free drilling. Geometry, combined with flute...

Read More »
Deep Hole Micro Drills promote process reliability.
Drill Bits

Deep Hole Micro Drills promote process reliability.

Able to handle ISO-P, M, K, and N material groups, Walter Titex Xotreme M, DM8, and DM12 respectively cover drilling depths up to 5 x D, 8 x D, and 12 x D. Each solid carbide drill, available in diameters from 2-2.95 mm, has AlTiN-based coating for optimal cutting performance and tool life. Point geometry ensures precise positioning on entry, while internal cooling and polished flutes with...

Read More »
Drill Bits

Ulterra Bit Drills Entire Eagle Ford Well at Record Pace

FORT WORTH, Texas, Dec. 4, 2011 - The new U616M, 8.75-in., six-bladed matrix bit with 16-mm cutters drilled from surface casing to TD at a record pace of 93 ft/hr. All three intervals - the vertical, curve and lateral - were drilled with the same bottom hole assembly, reaching TD without a trip out of the well. A total of 9,953 ft was drilled in 107 hrs, a time savings of 37.5 hours over the...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics