New Connectors Products

Liquidtight Connectors withstand abusive environments.

Suited for liquidtight, flexible metallic electrical conduit, Series ETP 4QS is UL-Listed for Class I, Div 2 hazardous locations. Straight connectors feature zinc-plated steel body and nut, while 45Ã-

Power Connectors offer quick-connect properties.

Series 518 single and multi-gang 5,000 V connectors and receptacles are designed and tested for ac or dc applications requiring currents of 50-1,000 A and voltages up to 5 kV. Featuring 360-º non-specific orientation, connectors can be mated and locked and offer male or female receptacles up to 5 pole. Bodies and caps are molded Hypalon rubber and contacts are copper alloy. All connectors are...

Plug Connectors provide 200 or 296 signal contacts.

GIG-Array 13 mm Mezzanine Connectors add capability for 18 or 28 mm board-to-board spacing when used with 5 or 15 mm receptacles. Units support transmission rates of 10 Gbps, and differential pairs nominally provide 100 ohms matched impedance. Connectors with 296 positions contain 37 columns with 8 individual signal contacts and 9 ground contacts in each column, while 200-position connectors...

Card Edge Connector conforms to PCI SIG specifications.

PCI Express Connector, Model 6325 allows user upgrades and bandwidth support beyond capacity of PCI Slot and AGP connectors. It provides 2.5 Gbps data transfer rate in desktop computers, communications equipment, workstations, and factory automation systems. Available in 36 x 1, 64 x 4, 98 x 8, and 164 x 16 contact positions, all in 1.00 mm pitch, one-piece connector supports different bandwidth...

Your Complete Guide to Understanding & Selecting the Right Heat Recovery System

Learn about the important qualities of heat recovery systems.

Connectors suit high pressure/low leakage applications.

Rated at IP 67 and capable of sealing up to 35 psi in unmated, open faced condition, water resistant connectors can be used in systems where moisture, humidity, water, and dust are present. Available in circular, rack and panel, and D-subminiature types, connectors can be custom designed to fit specification standard, or can incorporate special features, including different mounting types, unique...

RapidIO Switch provides embedded system interconnect.

Using 0.13 micron technology and integrated SerDes functionality, Tsi568A(TM) Serial RapidIO Switch provides chip-to-chip interconnect between I/O devices. Supporting aggregate bandwidth of 80 gigabits/sec, unit can be configured for up to eight 4x links or 16 1x links. It offers low latency and cut through, prevention of head-of-line blocking, CRC handling for hardware-based error recovery, and...

Right-Angled Receptacle provides ATCA Zone 3 interconnection.

When combined with existing right-angled header, AirMax VSÃ-® Virtual Shield receptacle creates complete coplanar interconnect for Advanced TCA(TM) Zone 3. Composed of 10 insert molded leadframe assembly columns, 150-position connector provides 5 differential signal pairs. Supporting custom interconnects between main card and direct mate rear transition module, mated pair offers signal line...

M12 Connector is offered in 4-pin version with D-coding.

Used to implement flexible I/O or field-bus connection on circuit board, M12 automation connector is rated IP67 and meets Industrial Ethernet standards. Used to connect sensors and actuators in automation systems, connector's D-coding prevents unit from being confused with A-coding used for sensor-actuator wiring or B-coding used with some field buses. Modular design offers choice of connection...

SMT Box Solutions provide placement flexibility.

Both 1263 SMT Box Receptacle (horizontal terminal) and 1265 SMT Box Receptacle (vertical terminal) have entry capability on either end and offer reliable connection via high-pressure contact area. Current rating is 3 A, and units mate with 0.025 in. square or round pin. Receptacles can accommodate minimum of 12 mating cycles without degradation. Designed for automation with existing pick and...

Wall Outlet provides interface for Ethernet cabling.

HARTING RJ IndustrialÃ-® Metal Outlet continues premis cabling according to IEC 11801 directly into industrial environment. PROFInetÃ-® compliant outlet carries IP 67 rating and can be connected with LSA-PLUSÃ-® technology. Suited for use in harsh applications, product mounts on walls, pillars, or beams. Covered label enables clear identification of both ports. On field cabling side,...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.