Coil and Cable Heaters

Portable Heater prevents liquid from freezing in tank, rail cars.
HVAC

Portable Heater prevents liquid from freezing in tank, rail cars.

By providing circulating hot water at up to 200°F with heater output up to 275°F, Hydra Wagon (HW) 2016 prevents liquids from gelling or freezing and becoming stuck in heat steam coiled rail tank cars in cold temperatures. System is available on skid and in open or closed trailer. Weighing ~8,500 lb when loaded for operation, trailer-mounted system burns 6–7 gal of diesel per...

Read More »
HVAC

Heat Trace Cable vs. Immersion Heaters

With the advancement in technology and increase in industrial demand, industries have started to mobilize over different heating methodologies, such as whether to use heating cables or immersion heaters. Heating cables are normally known as heat trace cables and can be used for various purposes- such as for viscosity control, residential roof and gutter, pipe tracing, temperature process...

Read More »
HVAC

Silicone Rubber-Based Heater has wrap-around design.

Elastic Wrap Heater serves applications that require heating for freeze protection or to prevent condensation. Based on silicone rubber heater technology, lengths of heater are coiled, and cord's elasticity facilitates wrapping around pipes, tubes, and fittings. Molded end protector snaps around pipe to provide structural support for lead wires. Available in 120 and 240 Vac variants, heaters come...

Read More »
Modular Heating Cables feature pre-terminated connectors.
Electrical Equipment & Systems

Modular Heating Cables feature pre-terminated connectors.

Available in 5, 10, 20, 50, 100, and 200 ft lengths, T-Links Self-Regulating Heating Cables provide specified amount of heat anywhere along their length in direct response to local temperature or thermodynamic variations to maintain process heating and prevent freezing. Cables maintain temperatures up to 150°F and will not burnout if overlapped. Offered in 3, 5, 8, and 10 W/ft version in 120 and...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
Freeze Protection Cables feature self-regulating heated core.
Electrical Equipment & Systems

Freeze Protection Cables feature self-regulating heated core.

Regulating its own heat output according to surrounding temperatures, Freeze Free(TM) heating cables reduce power consumption, while eliminating need for thermostat for some freeze protection applications. Cables operate on 120 Vac, and are suited for use on plastic and metal water pipes up to 2 in. dia. Available on reels in lengths up to 500 ft, cables can be safely overlapped on plumbing...

Read More »
Self-Regulating Heating Cable has flame-retardant TPE jacket.
Electrical Equipment & Systems

Self-Regulating Heating Cable has flame-retardant TPE jacket.

Automatically varying its heat output with changes in surrounding temperature, SR Trace® provides freeze protection for plastic or metal pipes and vessels in ambient temperatures down to -40ºF, and maintains liquids in pipes at constant temperature. UL listed and CSA certified, waterproof cable is available in power densities of 3, 5, and 8 W/ft at 50ºF, for 120 or 240 Vac applications....

Read More »

Coil Heaters For Hot Runner Applications
HVAC

Coil Heaters For Hot Runner Applications

Durex Industries offers a complete line of formed coil heaters as high-performance heat sources for hot runner applications in the plastics industry. Both molding machinery manufacturers and plastic part molders will appreciate the benefits of these Durex heaters. These coil heaters feature a rectangular sheath, which enables wattage to be evenly distributed over the length of the injection...

Read More »
HVAC

Cable Kit simplifies floor warming coverage.

Warm Tiles® DFT 120 V floor warming cable kit allows contractors to install full floor warming coverage simply by lacing free form cable on floor wherever heated area is required. Cables can be used over variety of substrates including plywood, backer board, and concrete, and are placed 3 in. apart in typical room above heated area, and 1.5 in. apart for room above unheated area, on concrete...

Read More »
Circulation Heater features non-welded construction.
HVAC

Circulation Heater features non-welded construction.

Providing indirect heating, CAST-X 3000 consists of 2 helical coiled tubes and tubular elements cast into aluminum body, which serves as heat transfer media between tubular element and heavy-wall 316L process tubes. Fluid path is independent of heater sheath, preventing fluid contamination. Integrated thermostat housing allows heater to run dry, while dual tube construction allows water flow...

Read More »
Cable Heaters are custom formed.
HVAC

Cable Heaters are custom formed.

Mineral-insulated cable heaters deliver heat at temperatures over 1800°F in applications where standard heaters are impractical, due to size or space restrictions. Heaters can be formed to cover cylindrical areas that require uniform heating pattern. A variety of electrical connectors are available for application-specific requirements. Flexible leadwire can be supplied with protective jackets,...

Read More »
5 and 13 Micron Resolve Columns
Sponsored

5 and 13 Micron Resolve Columns

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.

Read More »

All Topics