Clock Generators

Clock Generators

Fan-Out Buffers support clock rates up to 750 MHz.

Available in 28 models, ZL402 Series Clock Distribution Differential Fan-out Buffers offer multiple fan-out ratios and supportÂ- 2 types of outputs: low voltage positive emitter coupled logic and low voltage differential signaling. Internal and external terminations for inputs eliminate need for external peripheral components. In addition, buffers combine low additive jitter with...

Read More »
Active Spread Spectrum Clock Generator ICs reduce EMI at source.
Clock Generators

Active Spread Spectrum Clock Generator ICs reduce EMI at source.

Supplied in 8-pin, 2 x 2 x 0.8 mm WDFN package, P3P8203A supports 3.3 V input, 18–36 MHz frequency range, and analog control of spread spectrum deviationÂ- via external resistor. Choice of external resistor value lets designers customize applications to achieve desired EMI reduction. Supplied in 4-pin, 1 x 1.2 x 0.8 mm WDFN package, P3MS650100H and P3MS650103H support 1.8–3.3 V...

Read More »
Asynchronous Binary Counter operates from -55 to +225°C.
Clock Generators

Asynchronous Binary Counter operates from -55 to +225°C.

Operating with supply voltage of 3.3-5 V, GALAXY CHT-74-4040 can be used as frequency divider with division rate up to 4,096. Counter features typical propagation delay of 19 nsec, low quiescent current of 21 Â-µA max, and output drive capability of 4 mA max. Available in ceramic CSOIC16 and CDIL16 hermetic packages, 12-stage asynchronous counter is suitable for clock generation and clock...

Read More »
Clock Generators

Texas Instruments Advanced Signal Conditioners Deliver Industry's Highest Performance at Lowest Power

Easy-to-use repeaters/retimers extend FR-4 signal reach beyond 50 inches at 10-Gbps, reduce BOM cost in enterprise servers, routers and switches DALLAS - Texas Instruments Incorporated (TI) (NASDAQ: TXN) today introduced 10 signal conditioners designed to drive high-speed interface standards such as 10G/40G/100G Ethernet, 10G-KR (802.3ap), InfiniBand, Fibre Channel and CPRI. The new integrated...

Read More »
Clock Generators

Reference Clock Multiplier is intended for receiver testing.

Agilent N4880A provides multiplying PLL that lets R/D and test engineers lock pattern generator clock of J-BERT N4903B and ParBERT 81250A to reference clocks from system under test. Reference clock rates from 19-100 MHz support receiver test applications such as PCIe® 1.x, 2.x, and 3.0 main boards; MIPI M-PHY devices; and UHS-II host devices. Simplified receiver test setup helps R/D and...

Read More »
Clock Generators

Clock Generator features output frequency of 2.37-2.6 GHz.

Equipped with high-frequency VCO and programmable output dividers, Model LMK03806 simplifies timing architectures in wired and optical communications line cards by simultaneously synthesizing 7 independent frequencies on 14 outputs. Each output clock is programmable in LVDS, LVPECL, or LVCMOS format. Housed in 9 x 9 mm, 64-pin LLP, Model LMK03806 offers sub 50 fs rms jitter at 312.5 MHz output...

Read More »
Clock Generators

LSI Chipset supports Intel® Atom(TM) E6xx Series processors.

Combining power management IC, clock generator IC, and input/output hub IC, Large Scale Integrated Chipset facilitates design of embedded applications. PMIC supplies all voltage rails required for processor, controller hub, DDR2 memory, and BIOS-storage SPI Flash connected to Intel® chip. Utilizing Spread Spectrum technology, CGIC provides all required clocks, including CPU, PCIe, SATA, and...

Read More »
Clock Generators

Clock Generator replaces multiple VCXOs and PLLs.

Offered in 40-pin LLP® package, Model LMH1983 features dual-stage PLL architecture that integrates 4 PLLs with 3 on-chip VCOs. Device creates simultaneous SD video, HD video, and audio clocks from compatible references. Unit generates 4 simultaneous LVDS clocks with dedicated top-of-frame timing pulses, providing plug-and-play solution with minimal FPGA programming. With output jitter of 40...

Read More »
Clock Generator targets GPS-based timing applications.
Clock Generators

Clock Generator targets GPS-based timing applications.

Operating from +3.3 V supply, TCXO-based Model FTS250 provides 1 pps CMOS output and generates 10 MHz CMOS and 10 MHz SINE output from voltage controlled crystal oscillator. Mixed signal PLL device can lock to 10 MHz reference derived from onboard GPS receiver, or to external 10 MHz or 1 pps reference. Alarms are provided to indicate Loss-of-Lock, Holdover, and Antenna Fault. Housed in 2.9 x...

Read More »
Clock Generators

Timing Devices extend battery life for portable electronics.

VersaClock® LP programmable clock generators reduce power consumption and optimize board layout in battery-operated consumer applications. They reduce power requirement to 4-8 mW for single clock output and also reduce power usage during power down (20 Â-µW) and sleep mode with 32 kHz clock active (200 µW). Each of 5 models features 4 internal PLLs, individually programmable...

Read More »

All Topics