Brush and Scraper expand to clean tubes.
Applicator / Finishing / Cleaning Brushes

Brush and Scraper expand to clean tubes.

As Expanding Brush and Expanding Scraper spin, centrifugal force raises floating brushes or floating scraper blades so they conform to tube's ID, even if ID changes along length of tube. As brushes and scrapers wear, they raise more to conform to tube's ID. Applications include cleaning boilers, heat exchangers, condensers, chillers, steam generators, and pressure vessels. Brush cleans...

Read More »
Electro-Coagulation System removes impurities from oils.
Oil Purifiers

Electro-Coagulation System removes impurities from oils.

Typically used for pretreatment of emulsified oils, ECL Series has flow rate of 5 gallons per minute. It features 230V, single phase, 20 amp electrical motor with .75 hp pump and 175 gallon cone tank. It is also suitable for removal of suspended solids, removal of complex organics, and destruction and removal of bacteria, viruses, and cysts.

Read More »
Miscellaneous Cleaning Equipment

Shoe Cleaner handles all types of dirt.

Bull Dog Model BD 351 is designed for cleaning large construction boots and shoes. It features 1/4 hp 115 V/60 Hz single-phase motor, 16 gauge stainless steel housing, and rotating heavy-duty nylon brushes. User operated push button switch turns on machine when depressed and shuts system down when released. BD 351 requires vacuum or central vacuum system to collect dirt. It handles mud, leaves,...

Read More »
Sanitary Tank Washers meet USDA, FDA, and 3A standards.
Miscellaneous Washing Equipment

Sanitary Tank Washers meet USDA, FDA, and 3A standards.

Clipdisc clean-in-place (CIP) tank washers offer hygienic design that delivers cleaning action in 360° wash pattern at flow rates from 22 to 67 gpm. They completely remove cheese, whey, and other byproducts from deep and enclosed make vats, finishing vats, and conveyors after manufacturing. Clipdiscs operate at pressures from 20 to 60 psi. Cleaning radii range is 6.5 to 7.5 ft, and wetting...

Read More »
Vacuum Cleaning Equipment

Vacuum Cleaner performs non-stop in harsh environments.

CFM 3997, with direct-drive TEFC motor, collects large amounts of dust and debris without clogging. Materials travel through vacuum's multi-stage filtration system, which utilizes oversized main filters to resist premature filter clogging and help maintain maximum suction power. Materials are then deposited in 46 gallon tank, which prevents workers from having to repeatedly stop production to...

Read More »
Radiator Washer reduces reject rate.
Parts Washing Equipment

Radiator Washer reduces reject rate.

High-volume radiator washer has high velocity blow-off units that reduce cross contamination between process stages, and remove excess water from radiator's inherent dense coil to ensure complete drying capability. Full width interlocking access doors to spray wash stages facilitate maintenance. It has polished stainless steel construction, and natural gas heat for wash, rinse, and dry stages.

Read More »
Wet/Dry Vacuums are CSA listed for industrial applications.
Vacuum Cleaning Equipment

Wet/Dry Vacuums are CSA listed for industrial applications.

MV-1300-OMEV has 1.3 hp motor, 115 cfm rating, water recovery of 9.0 gal, and waterlift of 93 in. MV-1800-OMEV has 1.6 hp motor, 120 cfm, water recovery of 13.0 gal, and waterlift of 96 in. Both have 120 V bypass motor, handle/cord wrap, 25 ft electrical cord, 10 ft hose with swivel, chrome wand, 14 in. wet/dry floor tool, drain hose, high impact poly canister, recessed clamps, friction fit inlet...

Read More »
Tube Cleaning System available in three configurations.
Miscellaneous Cleaning Equipment

Tube Cleaning System available in three configurations.

Wils-Away Pneumatic Systems include pneumatic drive unit, flexible shaft and casing, 6 spiral brushes or expanding brush and refill set, and foot pedal for hands-free On/Off and Forward/Reverse operation. Wils-Away 3000 is a 1 1/2 HP portable unit; Wils-Away 4000 4 HP dolly mounted unit is for heat exchangers, condensers, and small diameter pressure vessels; and Wils-Away 4500 4 HP dolly mounted...

Read More »
Cleaning System prepares concrete and steel surfaces.
Pressure Washing Equipment

Cleaning System prepares concrete and steel surfaces.

Blastrac® 2-20D portable blast cleaning system produces 20 in. blast pattern to strip, clean, and profile surfaces in one step. Designed for medium to large sized jobs, its travel speed is rated to 108 ft/minute. System uses two side-by-side blast wheels, positioned to ensure even pattern. It includes twin 15 HP motors, 8-54 dust collector with eight filter cartridges, and automatic pulse...

Read More »
Carpet Cleaning System extends carpet life.
Cleaning Equipment

Carpet Cleaning System extends carpet life.

Wash & Rinse(TM) extraction system puts down soapy water, scrubs carpet with cylindrical brush, and rinses carpet with clean water, removing both soap and dirt. System is available on Image 26B and 26E models, and is suitable for high traffic areas or in situations where carpets re-soil faster after being cleaned due to residual soap being left in.

Read More »

All Topics