Circuits

USB 3.0 Physical Layer Transceiver operates at 5 Gbps.

Operating from single crystal or external reference clock with selectable frequencies from 20, 25, 30, and 40 MHz, SuperSpeed TUSB1310 features PIPE3 and ULPI interfaces, which enable USB 3.0 functionality when used in conjunction with integrated application processor digital cores. Device includes integrated spread-spectrum clocking and receiver sensitivity of less than 50 mV differential...

Read More »
Telecom Transient Surge Protection IC responds in 100 nsec.

Telecom Transient Surge Protection IC responds in 100 nsec.

Providing overcurrent as well as SLIC battery voltage tracking triggered protection, TBU(TM) PL-Series SLIC meets telecom 500A Telcordia GR-1089 intrabuilding and 6 kV/150 A ITU-T standards. Device saves PCB space as it does not require peripheral R-C or L-C components or additional GDTs. Available in 850, 600, and 500 V and operating current levels of 100 and 200 mA, resettable circuit...

Read More »

Wi-Fi SoC powers wireless computer peripherals.

Model OZMO2000 SoC, compatible with Windows 7-based notebooks and desktops that are Wi-Fi enabled, is available for use in Wi-Fi mouse, keyboard, and remote control designs. Connecting with Wi-Fi chip in notebook without need for USB dongle, unit extends battery life via advanced power management and supports 24 Mbps data rates with low power consumption. It is compatible with Windows 7 SoftAP...

Read More »
Universal PoL Controller integrates 4 key features.

Universal PoL Controller integrates 4 key features.

As 20 V synchronous buck controller, LM27402 offers 3-20 V input capable of interfacing with all intermediate bus voltages. Integrated inductor DC resistance current sense eliminates need for resistive power train elements to detect output current, and output voltage is adjustable down to 0.6 V. Other features include programmable current sense threshold level, bias supply sub-regulator, and...

Read More »

Integrated Front End Module enhances wireless applications.

Supplied in 3.0 x 3.0 mm QFN package, RF3482 front end module (FEM) integrates WiFi power amplifier with SP3T switch for 2.4-2.5 GHz ISM band applications. Integration of complete switch functionality enables routing of WiFi and BluetoothÂ-® receive/transmit signals to 2 SoC transceivers. Additionally, SP3T switch can act as splitter to transmit or receive Bluetooth and WLAN signals...

Read More »
Hot Swap Controller IC minimizes external supporting components.

Hot Swap Controller IC minimizes external supporting components.

Supplied in 16-Lead 5 x 3 mm DFN package, LTC4219 Hot Swap(TM) controller allows low-power board with load supply voltages from 2.9-15 V to be safely inserted and removed from live backplane by limiting inrush current to load supply during power up. This 5 A controller comes in dedicated 12 or 5 V versions and offers adjustable current limit. Integrated power MOSFET and sense resistor in power...

Read More »
Step-Down DC/DC Converter has max junction temperature of 150-

Step-Down DC/DC Converter has max junction temperature of 150-

Operating within 3.6-37 V VIN range, H-Grade Model LT3686H features overvoltage lockout, protecting regulator and load from transients up to 55 V, making IC suited for load dump and cold-crank conditions. Internal 1.85 A switch delivers up to 1.2 A of continuous output current at voltages as low as 0.8 V, and switching frequency is user-programmable from 300 kHz to 2.5 MHz. Housed in 3 x 3 mm...

Read More »

DC/DC POL Regulator delivers 15 A from inputs down to 1.5 V.

As complete switch mode DC/DC Â-µModuleÂ-® POL regulator, LTM4611 integrates main DC/DC power circuit and gate drive circuit plus inductors, MOSFETs, input and output bypass capacitors, and compensation circuitry. IC can generate 5 V N-channel MOSFET gate drive for voltage conversion from 3.3 VIN or less to loads as low as 0.8 V at up to 15 A. Offering conversion efficiencies up to 92%,...

Read More »
Current-Sense Amplifier delivers wide-input common-mode voltage.

Current-Sense Amplifier delivers wide-input common-mode voltage.

Allowing direct measurement of current in power lines operating up to 70 V, Model TSC103 aids design of power management, monitoring, and safety equipment. Device accepts common-mode input from 2.9-70 V and offers selectable output gain of 20, 25, 50, and 100 V/V. Common-mode input can also be set from -2.1 to 65 V in dual-supply configurations. Operating from -40 to 125Â-

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics