Ceramics

Ceramics

Machinable Ceramic operates continuously at 1,600°F.

Acting as ceramic thermal insulator, M/M 1600 Glass Mica Composite features fine grain construction and enables components to be machined from compression molded sheets using conventional cutting tools. Material exhibits 1.02 W/m°C thermal conductivity, ~300 sec tracking and arc resistance, and 500 V/mil dielectric strength. It comes in 8 in. dia discs ranging from 1/16 to 1 1/8 in. thick...

Read More »
Substrates

Metallized Ceramic Substrates are RoHS compliant.

Offering substitute for thick film materials containing platinum-palladium, LCMC metallized ceramic substrates are manufactured by process that combines thick film processing with Ni-Au plating. They can withstand multiple SMT reflow solder cycles and repairs without solder leaching. Featuring tracks resistivity of 1-2 mohm/sq, substrates can be fabricated in 5 x 7 in. format and are suited for...

Read More »
Ceramics

Glass-Ceramic Material is machinable with carbide tools.

Aremcolox(TM) 502-600 is used to produce thermally insulative and high dielectric components and fixtures used in electrical and electronics applications to 1,100°F. Along with zero porosity, product exhibits compressive strength of 32,000 psi and flexural strength of 14,000 psi. Product, available in rods from Â-¼-1 in. dia x 18 in. long and plates from 14 x 20 x 1/8-1 in., offers 380...

Read More »
Miscellaneous Compounds

Ceramic Compound offers high-temperature thermal insulation.

Fused silica-based Ceramacast(TM) 645N is suited for encapsulating small ceramic and metal housings used in high temperature devices such as flow meters, pressure sensors, and temperature sensors to 3,000°F. Product offers dielectric strength of 300 V/mil, compressive strength of 7,000 psi, and chemical resistance. Supplied in powder form, compound is mixed with water and sets at room...

Read More »
Ceramic Putty Bonds, Repairs, Seals & Insulates
Putty

Ceramic Putty Bonds, Repairs, Seals & Insulates

Made from high purity alumina oxide ceramics and ceramic binders, Thermeez 7020 cures at room temperature for resistance to heat, electricity, molten metals, most chemicals, and oxidation. Product is dispensed with one push from dispenser tube or 11 oz caulking cartridge. Providing equivalent of plastic wood, Thermeez 7020 air-dries to hard ceramic body delivering instant repairs to ceramics,...

Read More »
Ceramics

Ceramic Substrate provides strength and elasticity.

Available in thicknesses of .008, .010 and .015 in., Rubalit® HSS aluminum oxide ceramic substrate is available in standard dimensions up to 5 x 6.5 in. Based on 3 Point Method for testing bend strength, substrate measured more than 700 Mpa, with modulus of elasticity rated at 335 GPa. Bulk density tests out at 4.35 g/cmÂ-³. Applications include automotive, power supply, sensing,...

Read More »
Glass-Ceramic withstands temperatures to 700°F.
Ceramics

Glass-Ceramic withstands temperatures to 700°F.

Machinable, Aremcolox(TM) 502-400 produces thermally insulative and high dielectric components and fixtures used in electrical and electronics applications. It offers compressive and flexural strengths of 40,000 and 15,000 psi, respectively, dielectric strength of 400 V/mil, and thermal conductivity of 2.88 Btu-in/hr-ftÂ-²-°F. Product comes in rods from ¼-1 in. diameter x 18...

Read More »
Ceramic Compound pots high temperature lamp bases.
Ceramics

Ceramic Compound pots high temperature lamp bases.

Ceramacast(TM) 576N large grain, alumina-filled, ceramic compound features temperature resistance to 3000°F, dielectric strength of 150 V/Mil, compressive strength of 10,200 psi, and moisture and chemical resistance. Product is supplied in powder form and mixed in ratio of 100 parts powder to 12-14 parts water. It is dispensed through pressurized dispensing equipment and sets in 16 hr at...

Read More »
Ceramic Insulators suit electrical and thermal environments.
Ceramics

Ceramic Insulators suit electrical and thermal environments.

Machineable ceramic components perform in environments with temperatures to 1,000°C and thermal conductivity to 2,800°C, depending on material. Products offer tolerances to ±.0001 in. as well as flatness and parallelism within ±.0001 in. per 12 in., depending upon part material and configuration. Insulators can be precision machined from Mycalex®, Mykroy®,...

Read More »
Metalizing Ceramics are available for beryllium oxide discs.
Ceramics

Metalizing Ceramics are available for beryllium oxide discs.

Thick-film metalizing and sputtered thin-film metalized patterns are available for company's line of BeO discs, discs with flats, washers, and heat sinks. Thick-film metalizing techniques include screen printing, spraying, and roller coating. Sputtered thin-film metalized patterns permit tightly spaced lines to be applied to fired ceramic substrate. Patters use molybdenum-manganese refractory...

Read More »

All Topics