Centrifugal Pumps

Pumps suit painting and surface treatment applications.
Centrifugal Pumps

Pumps suit painting and surface treatment applications.

Designed for wet-well installation in closed tanks under atmospheric pressure, Etanorm-GPV and Etanorm-CPV are vertical centrifugal pumps available in cast iron or stainless steel. They can be supplied for installation depths ranging in 250 mm steps from 350-2,000 mm and are offered in design D (dry, cantilever) for fluid temperatures to 70°C or design W (wet) for fluid temperatures to...

Read More »
Condensate Pump Mechanism is offered as retrofit.
Centrifugal Pumps

Condensate Pump Mechanism is offered as retrofit.

Designed as in-line, bolt-in upgrade for mechanical pumps, Pivotrol® Pressure-Powered Pump Cover and Mechanism Retrofit is rated for 200 psig operation. Pivotrol PowerPivot® technology replaces conventional pins and linkages with pivots, which reduce friction and wear to lengthen service life. Damper uses hydraulic inertia of collected condensate to reduce mechanical shock as valve...

Read More »
Wastewater Treatment Products suit municipal applications.
Centrifugal Pumps

Wastewater Treatment Products suit municipal applications.

For close-coupled configurations, 2000 CC pump features sealed Ultra-Drive® universal gear-joint drive train and optimized rotor/stator pumping element geometry. Annihilator(TM) grinders are twin shaft solids reduction units with optimized cutter combinations and one-piece flange housing. Able to handle dewatered municipal sludge to over 50% solids, 2000 HS System features integral hopper...

Read More »
Mag Drive Pumps suit aggressive/high-purity applications.
Centrifugal Pumps

Mag Drive Pumps suit aggressive/high-purity applications.

Non-metallic, centrifugal Series WMD and MD are engineered with internal cooling circuit that uses hollow rotating spindle to create positive, forced cooling path, lubricating bearing surfaces. Double bearing system allows cooling circuit liquid to continually wash front and rear radial bearings. Inner rotating assembly of alumina ceramic or SiC spindles are bored, turned, and polished. Pumps...

Read More »
Industrial Sump Pumps suit solids-handling applications.
Centrifugal Pumps

Industrial Sump Pumps suit solids-handling applications.

Model 3171 self-priming, vertical wet pit sump and process pump offers sealless construction and is available with recessed impeller. Horizontal, solids-handling unit offers capacities to 3,180 gpm and heads to 344 ft. Trash Hog® solids handling, self-priming pump features non-clog impeller, capacities to 6,000 gpm, and heads to 140 ft. Offered in capacities to 4,000 gpm and heads to 220...

Read More »
Pump handles corrosive and abrasive slurries.
Centrifugal Pumps

Pump handles corrosive and abrasive slurries.

Medium-duty Model JC features extra thick wet end components, heavy-duty power end, and replaceable wear liner. Impeller design allows for external impeller clearance adjustment. Available in 15 sizes, Model JC offers capacities to 7,000 gpm, heads to 240 ft, temperatures to 250°F, and pressures to 127 psig. Unit handles spherical solids to 2.25 in. Applications include sludge, clay, sand,...

Read More »
Condensate Pump is rated for 300 psi operation.
Centrifugal Pumps

Condensate Pump is rated for 300 psi operation.

Pressure-powered Pivotrol® PTF-HP is designed for steam system condensate recovery in rapid-cycling process environments under elevated pressure and temperature conditions. PowerPivot® technology replaces pins and linkages with pivots, minimizing friction and wear. Damper uses hydraulic inertia of collected condensate to reduce mechanical shock as valve actuators shift....

Read More »
Centrifugal Pumps feature double cartridge seals.
Centrifugal Pumps

Centrifugal Pumps feature double cartridge seals.

Suited for corrosive and abrasive materials, Series 1700 Seals on Stan-Cor Centrifugal Pumps are hydraulically-balanced and feature cassette-within-a-cartridge design. Removable inner cassette allows gland to be reused with each new seal. Friction drive lock ring with cap screw assures alignment and eliminates slippage to facilitate installation. Self-centering locators are internal to seal and...

Read More »
Centrifugal Pump meets high pressures at low speeds.
Centrifugal Pumps

Centrifugal Pump meets high pressures at low speeds.

Vertical Multi-Stage Series MS5-4x4-SEL-CDM-ADP has flow rates up to 500 gal and is capable of heads up to 700 ft at 1,750 rpm. Available in stainless steel, pump features one-piece shaft, depths to 20 ft, and no seals. It offers extra stages for higher pressures. Applications include industrial washers, filtration systems, chemical plants, power plants, machine tools, spray booths, and phosphate...

Read More »
Close-Coupled Pumps transfer high-solids content materials.
Centrifugal Pumps

Close-Coupled Pumps transfer high-solids content materials.

Offering flow rates to 1,000 gpm, Moyno® 2000 CC Pumps feature sealed, Ultra-Drive® gear-type universal joint drive train and rotor/stator pumping element geometry. ANSI flat face flanges are provided on suction and discharge ends. Single mechanical seals meet DIN Standard 24960 and ISO 3069. Pumps are suited for scum and grease pumping, lime slurry transfer and dosing, chemical...

Read More »

All Topics