Casters

Twin Wheel Casters suit material handling applications.
Casters

Twin Wheel Casters suit material handling applications.

Series 2SL twin-wheel casters feature 1 3/8 in. dia wheels with caster height of 2Â-¼ in. and load capacity of 264 lb. Tread width for 35 mm wheels is 9/16 in., and top plates have fixing holes to suit ¼ in. dia countersink head screws. Designed for moving equipment and loads over level surfaces, casters feature non-marking black nylon wheels that are resistant to oils, fats,...

Read More »
Kingpinless Caster is suited for rough conditions.
Casters

Kingpinless Caster is suited for rough conditions.

Available with wheel diameters from 6-20 in., Series KP290/KP291 is designed for heavy shock loads and punishing service in applications where equipment ranges from 1,550-5,000 lb. Shielded swivel raceway protects caster from dust and grime, while precision ball bearing raceways facilitate swiveling under load. Springs, offered in various tensions to meet load requirements, provide shock...

Read More »
Swivel Casters offer load capacities from 198-297 lb.
Casters

Swivel Casters offer load capacities from 198-297 lb.

Available in 4 swivel and 4 total-lock swivel models, SingleTech Solus Casters are constructed of 2 pressure-diecast aluminum shells, and are engineered to swivel freely in all directions while minimizing pushing effort. Total lock models feature brake mechanism activated by light pressure on pedal. Models with 4 and 5 in. wheel diameters have overall heights of 142 and 178 mm, respectively....

Read More »
Swivel Caster is designed for strength without kingpin.
Casters

Swivel Caster is designed for strength without kingpin.

Commando, available with swivel seal for protection from contaminants, take repeated heavy side-load impacts without damage. Its 6 or 8 in. wheels come in solid elastomer, neoprene, urethane, semi-steel, or low-effort (LE) wheel materials. With load capacities from 500-1,300 lb, product features 2Â-½ in. offset design with heavy-duty stamped and welded construction and offset double-row ball...

Read More »
Stem Casters have molded-in bearing.
Rolling Wheels

Stem Casters have molded-in bearing.

Suited for pushcarts, workstations, flow racks, and other structures requiring mobility in non-tugging applications, CSC series includes swivel, swivel-with-stop, and fixed styles. They are sized for installation into end of 28 mm pipe sections and are made of polyurethane. Available in sizes of approximately 2, 3, and 4 in dia., products provide 75, 225, and 275 lb load bearing capacity per...

Read More »
Pneumatic-Tired Casters cushion loads over paved surfaces.
Casters

Pneumatic-Tired Casters cushion loads over paved surfaces.

Featuring heavy-duty construction, Series 7100 is available with 4 x 5 in. top plate with zinc-plating finish that prevents rust and wear. Swivel construction features drop-forged steel top plate and horn base, legs made of Â-¼ in. plate steel, and ¾ in. dia integrally forged steel kingpin. Assuring smooth swiveling, product incorporates 2 machined swivel bearing surfaces to...

Read More »
Casters are suited for use on medical equipment.
Casters

Casters are suited for use on medical equipment.

TwinTech Solus casters, offered in 5 swivel and 5 total-lock swivel models, are constructed of die-cast aluminum and swivel freely in all directions. Low-height and low-offset designs maximize stacking capacity and provide stability. With twin-wheel design, casters handle loads from 198-297 lb. Models with wheel diameters of 3, 4, and 5 in. have respective heights of 90, 120, and 148 mm. Total...

Read More »
Repair System fixes cracked bolt hole threads.
Threaders

Repair System fixes cracked bolt hole threads.

Based on Spiralhook(TM) thread geometry, Full-Torque(TM) thread repair system restores strength and new threads simultaneously. Available in most inch and metric sizes, system increases strength of casting when bolt or stud is torqued into insert. It pulls up on insert, increasing load on Spiralhook threads and radial drawing force of threads. System contains crack and prevents future damage...

Read More »
Casters are suited for office and computer workstations.
Casters

Casters are suited for office and computer workstations.

TP9300 Series casters employ built-in retractable stabilizer that allows unit to be rolled into place and then secured by shock-absorbing rubber leg that lowers by turning one lever. Products are available with 1Â-¾ and 2½ in. dia, non-marking, nylon wheels with zinc, chrome, and ivory powder coated finish. They are suited for use with portable units that remain stationary for...

Read More »
Casters are offered with attachable brake kit.
Casters

Casters are offered with attachable brake kit.

Casters in TP5000 Series are available with attachable total lock brake system, which locks down both wheel and swivel when user steps on pedal. Designated TP5000-SWB, kit allows end user to add total lock at their convenience by slipping over trailing edge of caster wheel and bolting in place by wheel axle. To accept attachable brake, TP5000 Series casters include serrated lower raceway....

Read More »

All Topics