New Win475 MDCC Automated Accelerometer Calibration System Meets SAEJ211 and SAE2570 Standards
Supports automated single calibrations of non-piezoresistive DUT’s, including piezoelectric, IEPE, voltage and velocity sensors, over frequencies from 5 Hz to 15 kHz. Offers up to eight single axis piezoresistive accelerometers (DUT’s) over a frequency range of 10 to 4000 Hz. Includes internal removable reference (REF) accelerometer with 100 mV/g sensitivity, eight-DUT test instrument...
Read More »
New HPC50 Pressure Calibrators Used for Process Control Applications
Calibrates pressure from vacuum to 15,000 psi /1000 bar with accuracy up to 0.035%. Offers deadweight tester accuracy with user-friendly features to deliver laboratory accuracy to an on-site and field usable instrument. Ideal for verification or calibration of pressure gauges, transducers, transmitters, pressure switches and safety valves.
Read More »
New Accelerometer Calibration System Supports Individual Calibrations of Non-piezoresistive DUT's
Win475 CRASH-CAL system automatically measures and saves relevant accelerometer characteristics such as ZMO, Zin and Zout. Reads onboard sensor electronic identifications, such as 1-Wire Dallas ID memory chips or TEDS piezoelectric accelerometers. Provides a number of value-added end-user benefits, including bottom-line cost savings.
Read More »
AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval
Rugged, light weight temperature calibrator designed for on-board usage. Offers a temperature range of 28 to 650°C (82 to 1202°F), Stability to ± 0.1°C (± 0.18°F), a One-year Accuracy of ± 0.9°C (± 1.62°F) and a Three-year Accuracy of ± 1.8°C (± 3.24°F) for the total temperature range. Colored safety icons make it quick and easy to detect if the calibrator is hot or cold, helping...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading
Provides time-saving features, like scaling, percent error and flow calculations as well as internal and external pressure modules into a single handheld unit. Memory slots allow storage of up to five screens, simplifying the recall of previously stored settings and user setups. Offers deadweight tester accuracy along with a host of user-friendly features that deliver laboratory accuracy to an...
Read More »
New Valve Tester from Fluke Reduces Test Time
Fluke’s new Loop Valve Tester is a handheld device that simplifies testing by performing a quick health check. The device allows for testing without removal of the valve, simplifying the process. Technicians can source the 4-20 mA signal while the device is interrogating HART data, collecting critical information about the valve’s position and status. With its built-in tests and interface,...
Read More »
AMETEK Releases New JOFRA CTC-1205 Temperature Calibrator with Mains power Variance Immunity Circuitry
The JOFRA® CTC-1205 Compact Temperature Calibrator is suitable for use in waste incineration, power plants, oil and gas production and metal industry. The calibrator can be used in temperature range between 100 and 1205°C with an accuracy of ± 0.2°C and stability up to ± 0.1°C for total temperature range. The units are offered with STS reference sensors for full documentation, automatic...
Read More »
Renishaw to Feature XM-600 Laser Measurement System at IMTS 2018
West Dundee, IL – August 7, 2018 – Renishaw, a precision engineering and manufacturing technologies company, will feature the XM-600 laser measurement system at IMTS 2018 on September 10 - 15 in Chicago. Using technology developed for the XM-60 multi-axis calibrator, the newly launched XM-600 offers enhanced capability to connect directly with Renishaw’s range of universal CMM controllers...
Read More »
New VALIDATE IBC Linearity and Calibration Verification Kit Maximizes Reportable Range
VALIDATE® IBC Linearity and Calibration Verification Kit is designed for evaluating total iron binding capacity (TIBC) in human-serum. Unit provides five distinct concentrations that cover reportable range. VALIDATE® IBC helps in meeting daily QC, reportable range and analytical measurement range (AMR).
Read More »
New Lightweight and Compact 4-In-1 SOLT Calibration Kits Feature 3.5mm Connectors
Fairview Microwave’s new integrated calibration kits are available in two models with a capacity of 26.5 GHz. The kit features gold-plated connectors and an attached lanyard. They are used for cable verification, antenna measurement, field test and measurement applications. Same-day shipping is available.
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
