Calibrators

AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval
Calibrators

AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval

Rugged, light weight temperature calibrator designed for on-board usage. Offers a temperature range of 28 to 650°C (82 to 1202°F), Stability to ± 0.1°C (± 0.18°F), a One-year Accuracy of ± 0.9°C (± 1.62°F) and a Three-year Accuracy of ± 1.8°C (± 3.24°F) for the total temperature range. Colored safety icons make it quick and easy to detect if the calibrator is hot or cold, helping...

Read More »
New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading
Calibrators

New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading

Provides time-saving features, like scaling, percent error and flow calculations as well as internal and external pressure modules into a single handheld unit. Memory slots allow storage of up to five screens, simplifying the recall of previously stored settings and user setups. Offers deadweight tester accuracy along with a host of user-friendly features that deliver laboratory accuracy to an...

Read More »
New Valve Tester from Fluke Reduces Test Time
Calibrators

New Valve Tester from Fluke Reduces Test Time

Fluke’s new Loop Valve Tester is a handheld device that simplifies testing by performing a quick health check. The device allows for testing without removal of the valve, simplifying the process. Technicians can source the 4-20 mA signal while the device is interrogating HART data, collecting critical information about the valve’s position and status. With its built-in tests and interface,...

Read More »
AMETEK Releases New JOFRA CTC-1205 Temperature Calibrator with Mains power Variance Immunity Circuitry
Calibrators

AMETEK Releases New JOFRA CTC-1205 Temperature Calibrator with Mains power Variance Immunity Circuitry

The JOFRA® CTC-1205 Compact Temperature Calibrator is suitable for use in waste incineration, power plants, oil and gas production and metal industry. The calibrator can be used in temperature range between 100 and 1205°C with an accuracy of ± 0.2°C and stability up to ± 0.1°C for total temperature range. The units are offered with STS reference sensors for full documentation, automatic...

Read More »
Renishaw to Feature XM-600 Laser Measurement System at IMTS 2018
Calibrators

Renishaw to Feature XM-600 Laser Measurement System at IMTS 2018

West Dundee, IL – August 7, 2018 – Renishaw, a precision engineering and manufacturing technologies company, will feature the XM-600 laser measurement system at IMTS 2018 on September 10 - 15 in Chicago. Using technology developed for the XM-60 multi-axis calibrator, the newly launched XM-600 offers enhanced capability to connect directly with Renishaw’s range of universal CMM controllers...

Read More »
New Short-Open-Load-Through Calibration Kits are Compact and Lightweight
Calibrators

New Short-Open-Load-Through Calibration Kits are Compact and Lightweight

New 4-in-1 Short-Open-Load-Through Calibration Kits are available in PE5CK1013 and PE5CK1012 two models. Units come with gold-plated 3.5 mm connectors and a handy lanyard. Products have a calibration capability of 26.5 GHz. The SOLT kits are designed for field testing, antenna measurement and cable verification applications. Units feature an impedance level of 50Ω, phase deviation of ±2...

Read More »
Fluke 729 Automatic Pressure Calibrator is Finalist in Control Engineering's Engineers' Choice Awards
Calibrators

Fluke 729 Automatic Pressure Calibrator is Finalist in Control Engineering's Engineers' Choice Awards

New pressure calibrator recognized for improving repeatability and simplifying the calibration process EVERETT, Wash., Oct. 31, 2017 - The Fluke® 729 Automatic Pressure Calibrator is a finalist in the Hardware - Handheld Test, Measurement, Calibration category of the Control Engineering 2018 Engineers' Choice Awards. The awards honor the best control, instrumentation, and automation products...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers