Cable, Pipe and Rebar Locators

Visible Fault Locator features low voltage warning and auto-off.
Cable, Pipe and Rebar Locators

Visible Fault Locator features low voltage warning and auto-off.

Designed for installation and maintenance of optical networks, Model 811 uses visible light to indicate location of fiber faults accurately from macro bend point, break, problem coupler or connector, or mechanical splice that is not aligned properly. Locator is suitable for both single mode and multi-mode fibers, and also offers tool for OTDR as it remedies limitation of dead zone. Unit supports...

Read More »
Cable, Pipe and Rebar Locators

Portable Fault Locator accommodates various cable types.

Using TDR technology, model A0680005 can test line breaks and short circuit faults in twisted-pair, data, high-frequency, and coaxial cables. Standard features include HD backlit LCD screen, test blind zone of less than 2 m, and comparison test function. Able to test 25, 50, 75, and 100 ohm impedance cables, instrument also provides electronic map relevant to time domain and respectively supports...

Read More »
Cable, Pipe and Rebar Locators

Visual Fault Locator tests telecom, CATV, fiber optic networks.

Used for testing single mode (SM) or multi-mode (MM) fiber, portable model 08511 has 650 nm visible laser source and output power of 1.8 mW. Functionality detects breaks or critical bend points in fiber optic cables and also identifies fiber in ribbon or bundled fiber optic pigtails. Further support is provided for mechanical fusion splice optimization as well as location of faults at distance of...

Read More »
Cable, Pipe and Rebar Locators

Optical Visual Fault Locator features pen-style design.

Model 3105P optical visual fault locator enables fiber tracking, fiber routing, and continuity checking in optical networks. Unit detects faults in OTDR dead zone and finds breaks, poor connections, and bending/cracking in fiber optic cables. Supporting CW and pulse operating modes, 650 nm device is drop- and dust-resistant and offers low voltage warning. It includes laser case ground design to...

Read More »
Telephone Cable Fault Locator operates in two modes.
Cable, Pipe and Rebar Locators

Telephone Cable Fault Locator operates in two modes.

Integrating TDR and intelligent bridge testing functions into one unit, Model 98 examines patch cords, ribbons, and bunched pigtails. Unit performs measurements at distances up to 15 km, and can detect breaks and micro-bends, even in jacketed fibers. In pulse mode, locator tests for line breaks and mix, and in bridge mode, unit locates shorts and bad insulation. Operating continuously for up to...

Read More »
Cable, Pipe and Rebar Locators

Telephone Cable Fault Locator Operates in Pulse and Bridge Modes

Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) has released its telephone cable fault locator, an ideal tool for examining patch cords, ribbons or bunched pigtails. It is suitable for the installation and maintenance of fiber optic networks, telecommunications and CATV networks. This fault locator integrates both TDR and intelligent bridge testing functions into one unit. This...

Read More »
Cable, Pipe and Rebar Locators

Automatic Communication Cable Fault Tester is portable.

Integrating functions of ATDR, ohmmeter, megohmmeter and automatic bridge, portable and multi-functional automatic communication cable-fault tester, 8B locates faults such as core wire breakage, misconnection, water absorption and poor installation. Backlit LCD screen displays 6 resistance values between A, B paired lines and connection line. Cold and pressure resistant unit has intelligent...

Read More »
Cable, Pipe and Rebar Locators

CATV Cable Fault Locator tests underground cables.

Utilizing Time Domain Reflection technology along with analysis software, Model A0500007 tests underground cables to discover impedance break points in HFC systems and then locate/reveal cable damages, tie-in dampness, and terminal impedance failure. It can accurately test 25, 50, 75, and 100 W impedance cables at lengths of up to 2 km. Electronic map relevant to time domain picture aids in easy...

Read More »
Cable, Pipe and Rebar Locators

Visual Fault Finder helps detect fiber cable breaks.

Featuring output power of 1.8 mW, 650 Nm visible laser source model A0680001 detects breaks and micro-bends for jacketed fibers, and locates faults at distance of up to 5 km from source. It has FC adapter compatible with SC and ST connectors, works continuously for 25 hr on single charge, and has auto-off timer. Handheld device is suited for testing fiber optic, telecom and CATV networks, and for...

Read More »
Cable, Pipe and Rebar Locators

Cable Fault Locator works on multiple cable types.

Targeted at electric wire and cable manufacturers, Model 600 is designed for testing line breaks and short-circuit faults of twisted-pair cable, data cable, high frequency cable and coaxial cable. Product tests cables of 25, 50, 75 and 100 W accurately with test range from 2 m to 8 km. Features include pulse widths between 270 ns and 5.6 Â-µm, wave range from 50-300 m/µs, and backlit...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics