Circuit Board Assembly Services

Test Fixture Boards utilize surface mount technology.

Custom Test Fixture Boards electrically interface test equipment to ball grid array packages. Multilayer FR-4 assemblies incorporate cable-to-board connectors and True BGA Socket(TM), which eliminates need to solder BGA to adapter. Electrical continuity is assured by spring-loaded beryllium copper contacts loaded in pogo pin terminals, the heads of which are compressed against balls of BGA...

Read More »
Adapter/PCI Board extend plant-wide control applications.
Engineering Software

Adapter/PCI Board extend plant-wide control applications.

FBUS-HSE/H1 Fieldbus high-speed Ethernet linking device connects 31.25 kbps H1 segments to HSE network running at 10 Mbps or higher. PCI-FBUS/2 plug and play PCI board allows user to connect FOUNDATION Fieldbus devices to desktop PCs that no longer offer ISA slot as standard feature. NI-FBUS v3.0 software integrates with LabVIEW 7 Express, supports FBUS-HSE/H1 and PCI-FBUS/2 Fieldbus interfaces,...

Read More »
Solderless Component Assemblies suit portable device OEMs.
Electrical Connectors

Solderless Component Assemblies suit portable device OEMs.

Elastomeric Technologies(TM) assemblies utilize proprietary STAX(TM) elastomeric surface-to-surface silicone rubber compression connectors to provide complete solderless interconnect assembly. Solution minimizes space on main PC board to one pair of contact pads. Assemblies, comprised of electronic component, rubber boot, and elastomeric connector, snap in place without special tools and are...

Read More »
Choke Circuits offer dc resistance down to 0.20 ohm.
Circuit Board Assembly Services

Choke Circuits offer dc resistance down to 0.20 ohm.

Packaged in lead-free, surface-mount, wire-wound designs, common-mode ICM-0805 and ICM-1206 suppress noise in USB 2.0, FireWire®/IEEE 1394, LVDS, and high-speed digital interfaces. With max dc resistance from 0.20-0.45 ohm, ICM-0805 is rated for currents from 450-280 mA and has common-mode impedance from 30-370 ohm @ 100 MHz. Max dc resistance for ICM-1206 models ranges from 0.3-1.2 ohm,...

Read More »
Plug-In Board offers 700 MHz Pentium III processor.
Single Board Computers (SBC)

Plug-In Board offers 700 MHz Pentium III processor.

NI PCI-7041/6040E is for real-time measurement and control applications embedded in desktop computers. Processor provides loop rates up to 26 kHz and allows users to build integrated real-time applications that run independent of operating system. With 32 MB of non-volatile CompactFlash memory, board stores embedded software, user application and data, while RS-232 port communicates to peripheral...

Read More »
Antenna Coils are packaged with flexible circuits.
Circuit Board Assembly Services

Antenna Coils are packaged with flexible circuits.

Flex-Coils, with flexible or rigid-flex circuits, and wire as small as 50 AWG, allow high sensitivity in flat laminated package. Etched coils feature total thickness of less than 0.010 in. Polyimide insulation provides high dielectric strength and protection for antenna. Flex-Coils can be designed in round, oval, or other shapes to meet packaging requirements for implantable medical devices,...

Read More »
Flexible Circuit saves space.
Circuit Board Assembly Services

Flexible Circuit saves space.

Twisty-Flex(TM) circuit provides the noise reduction of twisted-wire pairs or coax cable in flexible circuit. Two-layer design uses alternating conductors connected between layers of micro-vias, resulting in true twisted-pair construction with total thickness of less than 0.015 in. Wire pair can fit into circuit less than 0.1 in. wide, or integrate with other signal or power conductors in larger...

Read More »
Analog Output Modules deliver fast waveform output for PCI.
Circuit Board Assembly Services

Analog Output Modules deliver fast waveform output for PCI.

PCI-6731 and PCI-6733 have 4 and 8 analog output channels, respectively, and deliver 1 MS/sec per channel, 16-bit, analog waveform outputs. Both have 2 counter/timers, software-controlled onboard timing signal routing, and connect to company's instrumentation, data acquisition, motion, and vision products. DAQT(R) 6.9 driver software interfaces to LabVIEW(TM), LabWindows(TM)/CVI, and Microsoft...

Read More »
Analog Output Modules plug into PCI port.
Circuit Board Assembly Services

Analog Output Modules plug into PCI port.

With 16-bit NI PCI-6731 and NI PCI-6733 analog output modules, engineers can control waveform amplitudes with higher resolution. Both modules deliver high-channel density, 1 MS/s per channel 16-bit analog waveform output, and two counter/timers. NI PCI-6731 has four output channels, and NI PCI-6733 has eight. Both come with NI-DAQ 6.9 driver software that works with NI LabVIEW, LabWindows/CVI,...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics