AC Motor Controllers and Drives

AC Motor Controllers and Drives

AC Drives cut machine building and assembly times.

Intended for OEMs and system integrators, Model ACS150, offered in 0.5-5 hp, can operate in V/Hz mode, while Model ACS350, ranging from 0.5-10 hp, can operate in V/Hz, sensorless vector, or closed loop vector. Both incorporate built-in EMC filter and braking chopper. FlashDrop option replicates parameters in seconds with no power to drive needed. Model ACS150 can accept pulse train input for...

Read More »
Modular Variable Frequency Drives handle up to 650 hp.
AC Motor Controllers and Drives

Modular Variable Frequency Drives handle up to 650 hp.

Engineered to satisfy constant or variable torque demands of industrial process, water, or HVAC applications, high-power VLT® drives offer up to 550 hp from VLT 5000, and up to 650 hp from VLT 4000, VLT 6000 HVAC, and VLT 8000 AQUA series. Drives exhibit 98% operating efficiency and utilize cooling design that segregates heat of high-power components from electronics. Products are available...

Read More »
AC Motor Controllers and Drives

Variable Frequency AC Drives offer industrial motor control.

Able to handle most general-purpose, 3-phase motor control applications from 1/3-5 hp, VariFlex Drives come in 3 frame sizes, covering mains voltages from 180-528 Vac. They universally accept both single-phase and 3-phase supply voltages. Units feature standard Modbus capabilities and ability to clone programming from one drive to others via SmartStick. Drives also provide variety of fieldbus...

Read More »
Variable Frequency Drives suit low power applications.
AC Motor Controllers and Drives

Variable Frequency Drives suit low power applications.

Optimizing pump operation and protection, Series VLT®2800 features sleep functionality, run-dry detection, and pipe fill mode as standard. Drives are available in 0.5-2 hp, 200-240 V, 1- or 3-phase; 3-5 hp, 200-240 V, 3-phase; and 0.75-25 hp, 380-480 V configurations. They offer side-by-side mounting and include built-in PID controller, RFI filter, DC coils, and cold plate technology....

Read More »
AC Motor Controllers and Drives

Digital Vector Drive combines 4 motor functionalities.

SECO FX4000 Fusion(TM) drive combines functionality of ac flux vector drive, servo drive, programmable motion controller, and PLC. Drive architecture enables Fusion drives to control ac induction, ac synchronous, or brushless dc motors with power range from 1-350 hp. Available in enclosed NEMA 4/12 (up to 40 hp/460 V), NEMA 1 (50 hp and above), or open chassis configurations, modular drives offer...

Read More »
Variable Frequency Drives feature ratings up to 690 Vac.
AC Motor Controllers and Drives

Variable Frequency Drives feature ratings up to 690 Vac.

Engineered to meet water and wastewater application demands, VLT® 8000 AQUA series is comprised of models rated from 125-600 hp, 380-500 Vac and 50-400 hp, 525-690 Vac. Products provide variable- or constant-torque operation at 98% operating efficiency. Available in 2 frame sizes with Chassis/IP00, NEMA1/IP21, or NEMA12/IP54 enclosures, drives have modular construction, built-in Class A2...

Read More »
Enclosed AC Drive suits HVAC, pump, and fan applications.
AC Motor Controllers and Drives

Enclosed AC Drive suits HVAC, pump, and fan applications.

Equipped with Telemecanique® Altivar® 31 drive, S-Flex(TM) is available in 2 base enclosure sizes with ratings from 1-20 hp at 460 V. Suited for new and retrofit applications, unit meets requirements for industrial control panels with 100,000 AIC rating without power fuses. MAG-GARD® circuit breaker provides resettable over-current and branch circuit protection, while integrated...

Read More »
AC Motor Controllers and Drives

AC Drive delivers smooth door operation.

Housed in NEMA 12-rated enclosure, 230 V single-phase AC Drive provides controls for up/down and stop. Standard operation is auto locking and un-locking, requiring only momentary push of button. Thru-beam photo eyes and mechanical upper override disconnect are standard. With AC drive, door initially operates slowly, and then smoothly accelerates once it reaches certain height. When door is at top...

Read More »
AC Motor Controllers and Drives

AC Drive has modular layout and configurable features.

Designed as modular system with separate sections for converter and inverter, G5HHP AC drive provides up to 1,750 hp from NEMA 12 FVFF enclosure. Layout lets users customize drives from 400-1,600 A ratings and can be configured with power-related options such as circuit breakers, line reactors, filters, and regenerative front end. Standard non-regenerative front end supports 12, 18, or 24-pulse...

Read More »
Intelligent Drives suit motors up to 700 hp.
AC Motor Controllers and Drives

Intelligent Drives suit motors up to 700 hp.

Featuring dual microprocessors and motor control algorithms, Telemecanique® Altivar® 71 variable speed ac drives handle constant torque applications. Customizable LCD display has navigation wheel that allows users to scroll through menus. Integrated Modbus® and CanOpen protocols assure integration into any device level network, and PowerSuite software allows configuration,...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics