Abrasive Coated Discs

Abrasive Discs incorporate transparent grinding zone.
Abrasive Coated Discs

Abrasive Discs incorporate transparent grinding zone.

Z-THRU(TM) flap discs feature laser cut flaps, precisely layered to create transparent grinding zone that let users view work piece while grinding. Made from zirconia alumina grain, high-grade cooling agent, and heat-treated poly/cotton backing material, discs may be used for blending, finishing, and rust removal and can be used on carbon and stainless steels. They come in 4Â-½ and 5 in....

Read More »
Diamond Grinding Discs minimize sparking.
Abrasive Coated Discs

Diamond Grinding Discs minimize sparking.

Available in grits from 30-80 on discs with 4, 4Â-½, 5, and 7 in. diameters, Eco Brazing diamond grinding discs are suitable for grinding steel, stainless steel, and other materials. Light weight allows for high-rotation grinding on portable angle grinders and high-yield steel backing plate is elastic, minimizing chance of overginding. Minimal sparking makes discs usable in hazardous...

Read More »
Abrasive Disc Kits offer choice of sizes and grits.
Abrasive Coated Discs

Abrasive Disc Kits offer choice of sizes and grits.

Available with Type-R or -S fasteners, Rex-Cut® Cotton Fiber Quick Change Disc Kits contain eight 2 or 3 in. diameter discs in assortment of grit sizes. Featuring layers of non-woven cotton fiber that are impregnated with aluminum oxide abrasives and pressed together, discs constantly reveal fresh abrasives, resulting in smooth, controlled grinding. Discs will not smear stainless steel and...

Read More »
Abrasive Discs enable freehand grinding and cutting of steel.
Abrasive Coated Discs

Abrasive Discs enable freehand grinding and cutting of steel.

Providing more than 10 dBA noise reduction, SILENTIO resinoid-bonded, fiberglass-reinforced grinding wheel is suited for working on steel and SS to maximum speed of 80 m/sec, has damping feature for high run-out, and is available in 4 diameters in 115-230 mm range. Intended for machining SS at up to 80 m/sec, SUPER-THIN cut-off wheel is manufactured by using specially coated abrasive grain and...

Read More »
Abrasive Discs feature layered construction.
Abrasive Coated Discs

Abrasive Discs feature layered construction.

Rex-Cut® Cotton Fiber Quick Change Discs feature multiple layers of non-woven cotton fiber that are combined with abrasive grains and then pressed and bonded into flexible discs, exposing new abrasives as they work. Able to blend and finish corners using their face and edge, they are suited for SS, aluminum, and exotics. Discs are available with Roloc® and Sockatt® style...

Read More »
Grinding Discs blend welds on contoured surfaces.
Abrasive Coated Discs

Grinding Discs blend welds on contoured surfaces.

Capable of producing 32 RMS finish on stainless steel and non-loading on aluminum, Cut-N-Finish(TM) Discs are constructed of multiple layers of cotton fiber, fully impregnated with aluminum oxide abrasives, and pressed and bonded together to constantly expose fresh abrasives as they work. Flexible bond can follow contoured surfaces for light grinding and blending of MIG and TIG welds. Offered in...

Read More »
Abrasive Coated Discs

Finishing Flap Discs provide smooth grinding action.

Layered with non-woven synthetic fiber surface conditioning materials, Rex-Cut® Megabrite T27 Flap Discs expose fresh material as they wear. Units are rated for 13,300 rpm, but provide optimum performance with minimum heat at 6,000 rpm. Available in 4 Â-½ and 5 in. dia sizes with 7/8 in. holes or 5/8-11 adapters, discs are suitable for cleaning, deburring, blending, and finishing...

Read More »
Flap Disc grinds and finishes in one step.
Abrasive Coated Discs

Flap Disc grinds and finishes in one step.

Rex-Cut® FUSION(TM) Flap Disc features interleaf construction that combines coated abrasive layer and surface conditioning layer. Design constantly reveals fresh abrasives to remove welds, light burs, and surface roughness, leaving smooth finish on stainless steel structures in one operation using right-angle grinder. Disc is offered with coarse, medium, and very fine grits in 4Â-½ and...

Read More »
Abrasive Discs work with hard-to-grind materials.
Abrasive Coated Discs

Abrasive Discs work with hard-to-grind materials.

With blaze orange grain-side color, Norton SG® BLAZE R980 discs cut materials such as stainless steel, cobalt, chrome, inconel, and titanium. Conical shaped Type 29 flap wheels; single- and 3-ply Speed-Lok discs; and Type 27 flat discs feature wear resistant ceramic grain, polyester backing, and grinding aid. Each grain continually fractures in grinding process, along sub-micron faults in...

Read More »
Trimmable Abrasive Flap Disc ranges from 40-120 grit.
Abrasive Coated Discs

Trimmable Abrasive Flap Disc ranges from 40-120 grit.

Trimmable Cyclone(TM) features composite backing that can be trimmed up to 3/8 in. from original diameter, extending life of disc. By trimming backing material away, flap length is extended, enabling operator to access hard-to-reach areas such as right angles and irregular shapes. Non-marking backing will not damage work-piece. Made with zirconium abrasive grain, Trimmable Cyclone is available in...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics