New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462

Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System

Specifications:

Max Tube O.D.: 3.125″ (79.3 mm)

Min Tube O.D.: 1″ (25.4 mm)

Max Round Wall: .134″ (3.40 mm)

Max Shapes Wall: .120″ (3.04 mm)

Min Wall: .032″ (.812 mm)

Single Point Adjustment

Rafted

Get Quote: http://www.utubeonline.com/product/3-inch-new-tube-mill-line/

NEW! 7-1/2″ x .240″ Tube Mill Line, Stock #2747

Equipped With: Coil Car, Uncoiler, Shear & End Welder, Flattener, Horizontal Accumulator, Forming Mill, Sizing Mill, Drive Motors, Central Lube System and Tooling.

Specifications:

Max Tube O.D.: 7-1/2″ (190 mm)

Min Tube O.D.: 2.3″ (58.4 mm)

Max Thickness: .240″ (6.09 mm)

Max Square O.D.: 6″ x 6″ (152 mm x 152 mm)

Min Square O.D.: 2″ x 2″ (50.8 mm x 50.8 mm)

Get Quote: http://www.utubeonline.com/product/7-12-190-mm-x-240-6-09-mm-new-tube-mill-line/

NEW! 3″ x .166″ SFM Rafted Tube Mill, Stock #3115

Equipped With: Forming Mill, Welding Section, Sizing Mill and Dive Motors.

Specifications:

Max Tube O.D.: 3″ (76.2 mm)

Min Tube O.D.: 1″ (25.4 mm)

Max Thickness: .166″ (4.21 mm)

Min Thickness: .032″ (.812 mm)

Single Point Adjustment

Rafted

Get Quote: http://www.utubeonline.com/product/new-3-76-2-mm-x-166-4-21-mm-sfm-rafted-tube-mill/

NEW! 300 KW High Frequency Solid State Welder, Stock #3443

Equipped With: Main Transformer, Rectifier Cabinet, Operator Cabinet, Output Cabinet and Heat Exchanger.

Specifications:

Primary Volts: 480 V, 3 PH, 60 Hz

Primary Power: 450 KVA

Output Power: 300 KW

Output Frequency: 300 KHz

Machine Efficiency: 82% – 85%

Get Quote: http://www.utubeonline.com/product/new-high-frequency-solid-state-welder/

NEW! 500 KW THERMATOOL Seam Annealer, Stock #2926

Specifications:

KW Rating: 500 KW

Frequency:

Input Data: Volts: 460

Freq.: 60

Phase: 3

Amps: 734

KVA: 555

P.F.: .92

Get Quote: http://www.utubeonline.com/product/500-kw-thermatool-seam-annealer/

NEW! 3″ x .160″ UCG High Speed Flying Cold Saw, Stock #3428

Equipped With: Drive Controls, UCG U-TRAK Length Measurement Encoder System and Clamp System.

Specifications:

Max Speed: 325 FPM (100 m/min.)

Max Wall: .160″ (4.06 mm)

Min Wall: .030″ (.762 mm)

Max Tube O.D.: 3″ (76.2 mm)

Max Square O.D.: 2.5″ (63.5 mm)

Max Rectangle O.D.: 1-1/2″ x 3″

(38.1 mm x 76.2 mm)

Get Quote: http://www.utubeonline.com/product/new-high-speed-flying-cold-saw/

NEW! UCG U-TRAK Length Control System for Cut-Offs

This is a closed loop servo and ball screw system that will accurately control the die on almost any press. The U-TRAK Length Control System is perfect for use on tube mill and rollformer upgrades.

Max Line Speeds:

U-TRAK TW - 130 FPM

U-TRAK 1 - 175 FPM

U-TRAK 2 - 250 FPM

U-TRAK B - 600 FPM

U-TRAK HD - 135 FPM

U-TRAK R - Controls your existing hydraulic accelerator with Hi-Speed electronics for greater accuracy and reliability.

Get Quote: http://www.universalcontrolsgroup.com/utrak-length.html

NEW! 10″ x .100″ KENT Shear & End Welder, Stock #3334

Equipped With: 3 Blades Air Shear, Air Clamps, Auto TIG Torch and Threadless Patented “Rolex” Torch Drive Nut for Perfect Smooth Welds.

Specifications:

Max Strip Width: 10″ (254 mm)

Min Strip Width: 1″ (25.4 mm)

Max Strip Thickness: .100″ (2.54 mm)

Max Strip Thickness Hydraulic Option Over .100″ (2.54 mm): Max .125″ (3.17 mm)

Min Strip Thickness: .015″ (.381 mm)

Get Quote: http://www.utubeonline.com/product/new-10-x-100-kent-10-135-pma-end-welder/

FEATURED TUBE PLANT FOR SALE:

CONSISTING OF: Slitting Line PAXSON, 52″ x .250″ x 50,000 Lbs.

Tube Mill Line (#08) ABBEY/MCKAY w/High Frequency Welder

Tube Mill Line (#10) MCKAY w/High Frequency Welder

Tube Mill (#03) 33″ Roll Space, 7.5″ Shaft Diameter

Request a quote: http://www.utubeonline.com/product/complete-tube-plant-mills-slitting-line/

Universal Tube & Rollform Equipment Corporation

26202 Glenwood Rd.

Perrysburg, Ohio 43551 USA

sales@utubeonline.com

www.utubeonline.com

T: +1 419-872-2364

F: +1 419-874-2825

More from Software

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers