New Controls and Controllers Products

New SMC 1000 8x25G Enables Media Independent OMI Interface

Enables CPUs and compute-centric SoCs to memory channels of parallel attached DDR4 DRAM within the same package footprint. Interfaces to CPU via 8-bit OMI-compliant 25 Gbps lanes and bridges to memory via 72-bit DDR4 3200 interface. Delivers less than four ns incremental latency over a traditional integrated DDR controller with LRDIMM.

New RX651 MCUs with 64-pin BGA and 64-pin LQFP Package

Provides performance with 520 CoreMark® score at 120 MHz and power efficiency with a 35 CoreMark/mA score. Addresses advanced security needs for endpoint devices employing compact sensor and communication modules. Enables data exchange to change production instructions and reprogram MCU memory to update equipment settings.

New Panther Radio Remote Controls Offer up to 500m Range

Operates in the 2.4GHz frequency using 802.15.4 communication with direct sequence spread spectrum (DSSS). Accommodates up to 95% of all common overhead crane and hoisting applications. Allows interference-free operation of up to 12 systems in the same frequency channel.

Bristol ID Technologies Wins 2016 ESX Innovation Award

LIMA, N.Y. - The Electronic Security Expo (ESX) selected Bristol ID Technologies as an ESX Innovation Award Winner. The ESX Innovation Awards, part of the ESX Expo, honor products and services for their innovative technology, design or application.- The Innovation Awards also differentiate how the product or service helps the electronic security dealer, integrator or monitoring company better...

Understanding Food & Beverage Lubricants

The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.

CBK Engineering Integrate Perle in Remote Alarm Multiplexers Installed at the Rockefeller Center, Two World Financial Center and the Pepsi Building

NASHVILLE, TN — Keeping Uninterruptible Power Supply (UPS), HVAC and other environmental systems operational is common sense critical. If these systems fail, business operations in any affected building face a shut-down. To prevent these types of disasters, CBK Engineering was approached by an electrical contractor in New York City to design a Remote Alarm Multiplexer system. The idea was to...

OEM Controller fosters fiber optic signaling sensor integration.

Designed for- OEM industrial and medical systems, MR380-0 provides- turnkey solution for integrating any Micronor MR38X series ZapFREE-® Fiber Optic Signaling Sensors. Unit contains- stable transmitter and sensitive optical receiver that operate over- Duplex LC multimode fiber optic link. Compatible with OM1 (62.5/125 -µm) or OM2/OM3 (50/125 -µm) multimode fiber to distances up to 1.5 km,...

Digital Flow Controllers measure flow from 20 sccm to 5 slm.

Designed to accurately measure and control gas flow in wide variety of demanding applications, Digital 300 Series is accurate to better than -

Compact Embedded PC is used for Ethernet communication.

As PC-based controller in compact, Bus Coupler format for TwinCAT 3 automation software,- CX8190 employs 32-bit, 600 MHz ARM Cortex™-A9 processor;- hosts 512 MB RAM; and runs Windows-® Embedded Compact 7 OS. Ethernet port and- 2-port switch allow for real-time Ethernet or EtherCAT Automation Protocol (EAP), and programming is supported with TwinCAT 3 via fieldbus or Ethernet interface....

Mass Flow Controller delivers instant-on, real-time operation.

Designed for original equipment manufacture and process integration, 20SLPM BASIS™ model controls gas flow rates. BASIS series, featuring instant on technology, offers models with- FS- at 100 cm-³/min and- 1 or 20 Lpm. Models perform at full accuracy within 70 msec, and 100 msec control response enables real-time reaction to upstream fluctuations. Multi-gas and single-gas units offer...

Sciaky, Inc. to Highlight its Patented IRISS(TM) Closed-Loop Control for its Groundbreaking EBAM(TM) Metal 3D Printing Technology at Rapid 2016

CHICAGO- – Sciaky, Inc., a subsidiary of Phillips Service Industries, Inc. (PSI) and leading provider of metal additive manufacturing (AM) solutions, announced today that it will highlight its patented IRISS™ closed-loop control, which powers its industry-leading Electron Beam Additive Manufacturing (EBAM™) systems, at the Rapid 3D Manufacturing Event in Orlando, Florida.- - - - ...

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.