Universal Tube & Rollform Equipment Corp.

Adhesives & Sealants

Motion Control Solutions for Tube Mills and Rollformers.

UCG builds new control systems, die accelerators, drives and other accessories to retrofit new or existing machinery in almost any industrial environment. We have the knowledge to offer you a complete turn-key system from the initial design to start-up. Located under one roof with a leading used machinery dealer, Universal Tube & Rollform Equipment Corporation, our unique relationship enables us...

Read More »
2 in. - 4 in. Spindle Diameter Rollformers for Sale
Laboratory and Research Supplies and Equipment

2 in. - 4 in. Spindle Diameter Rollformers for Sale

9 Stand x 2-1/2" KANE & ROACH Rollformer, Stock #2715 Specifications: Line Direction: Right to Left Spindle Diameter: 2-1/2" Roll Space: 32" Horizontal Center: 15" Vertical Adjustment: 5" - 8" Base to Center of Lower Spindle: 6-1/4" View Specifications: http://www.utubeonline.com/product/9-stand-x-2-12-x-33-kane-roach-579-rollformer/ 10 Stand x 2-1/4" PEARSON Garage Door Angle Line, Stock #3111...

Read More »
3 in. OD x .125 in. wall, ABBEY ETNA 2K Tube Mill For Sale
Laboratory and Research Supplies and Equipment

3 in. OD x .125 in. wall, ABBEY ETNA 2K Tube Mill For Sale

UTUBE NUMBER: 3429 SPECIFICATIONS: Maximum Tube Diameter: 3" (76.2 mm) Minimum Tube Diameter: 1" (25.4 mm) Maximum Wall Thickness: .125" (3.17 mm) Minimum Wall Thickness: .018" (.457 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 50 FPM (15 M) Roll Space (Width) Forming: 10" Roll Space (Width) Fin & Sizing: 5" Driven Spindle Diameter: 2"...

Read More »
300 KW High Frequency Solid State Welder
Welding Equipment & Supplies

300 KW High Frequency Solid State Welder

Schedule a Visit to Perrysburg, Ohio to inspect this welder: (419) 872-2364 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW Welders Available! We offer a welder maintenance and training...

Read More »
Large Inventory of New and Used Tube Mills for Sale
Laboratory and Research Supplies and Equipment

Large Inventory of New and Used Tube Mills for Sale

NEW Tube Mill offering by Universal-Yoder-Kent: 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line (Built to Order) Specifications: http://www.utubeonline.com/product/3-inch-new-tube-mill-line/ Just Listed For Sale! ABBEY / MCKAY Tube Mill, Stock #3463B Specifications: http://www.utubeonline.com/product/abbey-mckay-used-tube-mill/ Just Listed For Sale! MCKAY Tube Mill Line, Stock...

Read More »
300 KW High Frequency Solid Sate Welder
Welding Equipment & Supplies

300 KW High Frequency Solid Sate Welder

Equipped With: Main Transformer, Rectifier Cabinet, Operator Cabinet, Output Cabinet, Heat Exchanger Delivery: In-Stock! Year: NEW, 2017 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW...

Read More »
New! Never Installed Tube & Pipe Machinery for Sale
Controls & Controllers

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »
NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line
Laboratory and Research Supplies and Equipment

NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line

UTUBE NUMBER: 3462 MANUFACTURER: UNIVERSAL / KENT / YODER SPECIFICATIONS: Line Direction: Right to Left Driven Spindle Diameter: 2.5" (63.5 mm) Maximum Tube Diameter: 3.125" (79.3 mm) Minimum Tube Diameter: 1" (25 mm) Maximum Round Wall Thickness: .134" (3.4 mm) Maximum Shapes Wall Thickness: .120" (3 mm) Minimum Wall Thickness: .032" (.8 mm) Single Point Adjustment Rafted Welding Speed: 65 - 300...

Read More »
Adhesives & Sealants

Motion Control Solutions for Tube Mills and Rollformers.

UCG builds new control systems, die accelerators, drives and other accessories to retrofit new or existing machinery in almost any industrial environment. We have the knowledge to offer you a complete turn-key system from the initial design to start-up. Located under one roof with a leading used machinery dealer, Universal Tube & Rollform Equipment Corporation, our unique relationship enables us...

Read More »
2 in. - 4 in. Spindle Diameter Rollformers for Sale
Laboratory and Research Supplies and Equipment

2 in. - 4 in. Spindle Diameter Rollformers for Sale

9 Stand x 2-1/2" KANE & ROACH Rollformer, Stock #2715 Specifications: Line Direction: Right to Left Spindle Diameter: 2-1/2" Roll Space: 32" Horizontal Center: 15" Vertical Adjustment: 5" - 8" Base to Center of Lower Spindle: 6-1/4" View Specifications: http://www.utubeonline.com/product/9-stand-x-2-12-x-33-kane-roach-579-rollformer/ 10 Stand x 2-1/4" PEARSON Garage Door Angle Line, Stock #3111...

Read More »
3 in. OD x .125 in. wall, ABBEY ETNA 2K Tube Mill For Sale
Laboratory and Research Supplies and Equipment

3 in. OD x .125 in. wall, ABBEY ETNA 2K Tube Mill For Sale

UTUBE NUMBER: 3429 SPECIFICATIONS: Maximum Tube Diameter: 3" (76.2 mm) Minimum Tube Diameter: 1" (25.4 mm) Maximum Wall Thickness: .125" (3.17 mm) Minimum Wall Thickness: .018" (.457 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 50 FPM (15 M) Roll Space (Width) Forming: 10" Roll Space (Width) Fin & Sizing: 5" Driven Spindle Diameter: 2"...

Read More »
300 KW High Frequency Solid State Welder
Welding Equipment & Supplies

300 KW High Frequency Solid State Welder

Schedule a Visit to Perrysburg, Ohio to inspect this welder: (419) 872-2364 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW Welders Available! We offer a welder maintenance and training...

Read More »
Large Inventory of New and Used Tube Mills for Sale
Laboratory and Research Supplies and Equipment

Large Inventory of New and Used Tube Mills for Sale

NEW Tube Mill offering by Universal-Yoder-Kent: 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line (Built to Order) Specifications: http://www.utubeonline.com/product/3-inch-new-tube-mill-line/ Just Listed For Sale! ABBEY / MCKAY Tube Mill, Stock #3463B Specifications: http://www.utubeonline.com/product/abbey-mckay-used-tube-mill/ Just Listed For Sale! MCKAY Tube Mill Line, Stock...

Read More »
300 KW High Frequency Solid Sate Welder
Welding Equipment & Supplies

300 KW High Frequency Solid Sate Welder

Equipped With: Main Transformer, Rectifier Cabinet, Operator Cabinet, Output Cabinet, Heat Exchanger Delivery: In-Stock! Year: NEW, 2017 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW...

Read More »
New! Never Installed Tube & Pipe Machinery for Sale
Controls & Controllers

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »
NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line
Laboratory and Research Supplies and Equipment

NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line

UTUBE NUMBER: 3462 MANUFACTURER: UNIVERSAL / KENT / YODER SPECIFICATIONS: Line Direction: Right to Left Driven Spindle Diameter: 2.5" (63.5 mm) Maximum Tube Diameter: 3.125" (79.3 mm) Minimum Tube Diameter: 1" (25 mm) Maximum Round Wall Thickness: .134" (3.4 mm) Maximum Shapes Wall Thickness: .120" (3 mm) Minimum Wall Thickness: .032" (.8 mm) Single Point Adjustment Rafted Welding Speed: 65 - 300...

Read More »

All Topics