Kontron Success Comes in Small 'packets'

Kontron secures considerable design-win traction with its Cavium-based AdvancedMC(TM) Intelligent IO modules for network security applications

Eching, Germany/Barcelona, Spain - February 16, 2009 - At Mobile World Congress, Kontron showcases its AdvancedMC(TM) packet processor IO modules - the Kontron AM42xx Intelligent IO series that are available now for full production orders. The Kontron modules are an integral portion of a live signaling and IPSec MicroTCA(TM) carrier grade gateway demonstration in collaboration with Adax at the Kontron Booth, 2.1, B14.

"After only 6 months on the market, the Kontron AM42xx modules have attracted higher than expected attention among equipment vendors looking for next generation multi-core packet processing at competitive pricepoints on a COTS platform," said Marc Leclaire, Kontron AdvancedTCA®/AdvancedMC(TM) product manager. "We have a very healthy sales funnel right now with a number of new and soon to be finalized design wins. These highly versatile modules are ideal for a wide range of applications, from IMS Media Gateways to IP monitoring services."

The Kontron AM42xx AdvancedMC(TM) modules have two key advantages - one, they offer outstanding performance: Based on the OCTEON Plus CN5650 packet processors with 12 x 64bit MIPS cores the Kontron AM42xx modules boast up to 14.4 billion MIPS64 instructions per second (14.4 GOPS) and are optimized for layer 4 to layer 7 data and security processing. Two, each module offers incredible cost savings. This is because each OCTEON Plus processor has integrated PCIe and XAUI bridges, thus saving the cost of two external bridge chips on the AdvancedMC(TM) module. Each processor additionally enables 10GbE direct to the processor.

Besides the fact that the Cavium-based multi-core architecture is ideal for packet processing applications, the Kontron AM42xx AdvancedMC(TM) modules can be used for Carrier Grade Linux distributions with built-in 'control' plane functions on one of the 12 cores, with data plane functions handled by the remaining cores.

As the Kontron AM42xx modules gain more traction and demand with AdvancedTCA(TM) and MicroTCA(TM) platform designs, more developers are recognizing the use and reuse of this AdvancedMC(TM) with its versatile I/O capability and support for Linux with dual 10GbE support.

Kontron offers two Kontron AM42xx models: the Kontron AM4220 with 2x 10GbE to the front and PCIe to the fabric side; and the Kontron AM4204 with 4x 1GbE ports to the front and software configurable interfaces to the fabric side (PCIe, 4x 1GbE or XAUI).

More about the Adax-Kontron demo:
Among the different configurations, the Kontron OM5080 MicroTCA(TM) platform is being used as a signaling and IPSec gateway, namely:

1. Adax's HDC-TDM and ATM-TDM SS7-to-M3UA using the Adax HDC3 AMC
3. ATM-OC3 SS7-to-M3UA using the Adax ATM4 AMC
4. ATM-IP interworking using the Adax ATM4 AMC
5. And, an IPSec security gateway - for encryption & authentication - using Kontron AM4010 processor AMC modules and the Kontron AM4204 NPU AMC module.

The combined platform solution is ideal for telecom equipment manufacturers (TEMs) who build edge and access applications, radio network controllers (RNCs) and mobile switching centers (MSCs) who need to design redundant systems without any single point of failure.

Applicable applications for the Kontron AM42xx Intelligent IO series
o Media gateway solutions
o Lawful intercept
o Security and encryption requirements
for network access and in the core
o Network Address Translation
o Session Border Controller
o Packet switches and routers
o x-CSCF in the IMS architecture
o Wireless Access Gateways (WiMax, LTE, Femto Cells)
o Content delivery, management and transcoding solutions media servers
o Content servers in IPTV, such as mobile TV applications and billing servers

More about the Kontron AM42xx AdvancedMC(TM) Intelligent I/O series:

More about Kontron AdvancedMC(TM) modules: www.kontron.com/products/boards+and+mezzanines/advancedmc/

More about AdvancedMC(TM): www.kontron.com/advancedmc

About Kontron

Kontron designs and manufactures standard-based and custom embedded and communications solutions for OEMs, systems integrators, and application providers in a variety of markets. Kontron engineering and manufacturing facilities, located throughout Europe, North America, and Asia-Pacific, work together with streamlined global sales and support services to help customers reduce their time-to-market and gain a competitive advantage. Kontron's diverse product portfolio includes: boards and mezzanines, Computer-on-Modules, HMIs and displays, systems, and custom capabilities. Kontron is a Premier member of the Intel® Embedded and Communications Alliance. The company has been a VDC Platinum vendor for Embedded Computer Boards for the last 5 years. Kontron is listed on the German TecDAX stock exchange under the symbol "KBC". For more information, please visit: www.kontron.com.

For more information:

Reader contact EMEA:
Kontron AG
Oskar-von-Miller-Strasse 1
85386 Eching/Munich
Tel: +49 (8165) 77-777
Fax: +49 (8165) 77-279

Reader contact Americas:
Kontron America Inc.
14118 Stowe Dr
Poway, CA 92064-7147
United States of America
Tel: +1 (888)-294-4558
Fax: +1 (858) 677-0898

More from Machinery & Machining Tools

All Topics