Kontron
Poway, CA 92064
Kontron's Systems Expertise Expanded with the Launch of a Family of Pre-integrated CompactPCI® Serial Building Blocks
With high-speed to hybrid CompactPCI-® Serial applications Eching/Nuremberg, Germany,- – As part of its 'High-Speed CompactPCI-® Initiative', at the Embedded World 2013 trade show in Nuremberg, Kontron is presenting a 3U CompactPCI-® Serial (CPCI-S.0) compliant chassis platform as well as peripheral boards for 10 Gigabit and Gigabit Ethernet, XMC-based I/O and SATA hard disks. These...
Read More »
Cloud Transcoding Platform addresses latency.
Featuring up to 18 Intel Core i7-3615QE Quad-Core processors with integrated Intel HD Graphics 4000, SYMKLOUD MS2900 Media Platform is designed for cloud-based media content delivery and transcoding applications. System integrates switching, load balancing, and processing in 2U rackmount design, enabling cloud service providers to configure clusters of highly dense 42U cabinets. Extensive power...
Read More »
6U cPCI® Processor Board and Chassis offers 10 GbE throughput.
Supporting 10 Gigabit Ethernet and PCIe over backplane, CP6004X-SA is powered by 2.3 GHz third generation Intel-® Core™ i7 processor 3615QE, uses ZD plus connector for- optimal signal integrity, and- is compatible with PICMG-® 2.20. Features- such as- 6 MB cache and- up to 16 GB 1,600 MHz DDR3 ECC SO-DIMM and complemented by diverse I/O. With full-mesh fabric configuration, CP-RAPID3, 6U...
Read More »
MicroTCA Carrier Hubs support MTCA.4 specification.
Suited for high-speed data acquisition applications, Models- AM4904/AM4910 support 4 high-speed fabric variants, including GbE, sRIO, PCIe, and 10 GbE. Units are equipped with 600 MHz PowerPC 405 EX processor for MCMC functionality and switching management, and enable redundant system architectures with up to 12 AMCs, 2 cooling units, and 4 power units. To provide support for various telco...
Read More »
ULP Computer-on-Module fosters enhanced SFF system development.
Helping embedded OEMs develop ULP SFF (ultra-low power small form factor) solutions, ULP-COM-sA3874i provides scalable building block suited for space-constrained, fanless, and harsh environment applications. COM leverages single-core ARM Cortex A8 technology performance based on TI AM3874 Sitara ARM processors; offers diverse interface, storage, and networking capabilities;- and- supports 3D...
Read More »
CompactPCI SBC supports machine and factory control.
Combining 1.0 GHz Celeron processor 807UE with Intel-® QM77 Platform Controller Hub, 3U Model CP3003-V- provides 1 MB Smart Cache and up to 4 GB DDR3 1,333 MHz SDRAM memory. Double slot version offers comprehensive set of interfaces such as 1x VGA, 2x DisplayPort, 1x USB 3.0, 2x USB 2.0, 3x Gigabit Ethernet ports, and Serial port on front panel plus option to hold CFast module or up to 2x 2.5...
Read More »
Embedded Box PC features integrated graphics accelerator.
Housed in 75 x 350 x 260 mm chassis, CB 753 Dual Head provides connections for 2 digital or 4 analog displays, making it suitable for fanless multi-display applications with high-resolution graphics. Unit is equipped with 2.26 GHz Intel Core 2 Duo Mobile processor and up to 8 GB DDR3 RAM. Configurable interfaces include 4x USB, 3x GB LAN, 4x RS232, PS/2 M+K, Line in, MIC In, 7.1 HD Audio, and 1x...
Read More »
Kontron Harnesses the Power of the 8-Core Intel Xeon Processor E5-2600 Family with Dual-Socket Bladed and Server Platforms
Telecom equipment manufacturers benefit from jump in multicore performance, I/O, memory and inter-processor bandwidth on new Kontron AdvancedTCA node blade and NEBS-3 rack mount server Montreal, Canada - Kontron today announced the official arrival of two new carrier grade products that channel the incredible performance and bandwidth of the new 8-core Intel Xeon processor E5-2600 family....
Read More »
Dual-Socket Bladed and Server Platforms use 8-Core Xeon® CPU.
For compute-intensive and content-aware network applications, AT8060 dual-socket AdvancedTCA-® 10GbE node blade comes with up to 16 processor cores or 32 threads, 4 memory channels per processor running at 1,600 MHz, one AdvancedMC(TM) bay, and intelligent power management controls. NEBS-3 compliant communication rack mount server, CG2200, has 2U, 20 in. deep form factor; flexible I/O and...
Read More »Kontron to Support NVIDIA Tegra 3 and TI Sitara AM3874 MPU on Board and System Level
Kontron aims to minimize development efforts with application-ready platforms and brings the latest ARM technology into the embedded market on a wide scale Eching, Germany, - Today, Kontron has announced the support of the newly introduced NVIDIA Tegra 3 quad core mobile processor and Texas Instrument's recently launched Sitara AM3874 microprocessor. Both will become the key computing cores of...
Read More »Kontron Joins Alcatel-Lucent CloudBand(TM) Ecosystem
Membership Extends Kontron Strategy to Further Facilitate Service Providers’ Transition to Adaptive NFV/SDN Models • Alcatel-Lucent’s CloudBand™ Ecosystem Program is designed to foster collaboration among providers of NFV infrastructure, application and management solutions. • An open approach to both streamlining and de-risking service providers’ migrations to NFV is critical for...
Read More »
Kontron's Systems Expertise Expanded with the Launch of a Family of Pre-integrated CompactPCI® Serial Building Blocks
With high-speed to hybrid CompactPCI-® Serial applications Eching/Nuremberg, Germany,- – As part of its 'High-Speed CompactPCI-® Initiative', at the Embedded World 2013 trade show in Nuremberg, Kontron is presenting a 3U CompactPCI-® Serial (CPCI-S.0) compliant chassis platform as well as peripheral boards for 10 Gigabit and Gigabit Ethernet, XMC-based I/O and SATA hard disks. These...
Read More »
Cloud Transcoding Platform addresses latency.
Featuring up to 18 Intel Core i7-3615QE Quad-Core processors with integrated Intel HD Graphics 4000, SYMKLOUD MS2900 Media Platform is designed for cloud-based media content delivery and transcoding applications. System integrates switching, load balancing, and processing in 2U rackmount design, enabling cloud service providers to configure clusters of highly dense 42U cabinets. Extensive power...
Read More »
6U cPCI® Processor Board and Chassis offers 10 GbE throughput.
Supporting 10 Gigabit Ethernet and PCIe over backplane, CP6004X-SA is powered by 2.3 GHz third generation Intel-® Core™ i7 processor 3615QE, uses ZD plus connector for- optimal signal integrity, and- is compatible with PICMG-® 2.20. Features- such as- 6 MB cache and- up to 16 GB 1,600 MHz DDR3 ECC SO-DIMM and complemented by diverse I/O. With full-mesh fabric configuration, CP-RAPID3, 6U...
Read More »
ULP Computer-on-Module fosters enhanced SFF system development.
Helping embedded OEMs develop ULP SFF (ultra-low power small form factor) solutions, ULP-COM-sA3874i provides scalable building block suited for space-constrained, fanless, and harsh environment applications. COM leverages single-core ARM Cortex A8 technology performance based on TI AM3874 Sitara ARM processors; offers diverse interface, storage, and networking capabilities;- and- supports 3D...
Read More »
MicroTCA Carrier Hubs support MTCA.4 specification.
Suited for high-speed data acquisition applications, Models- AM4904/AM4910 support 4 high-speed fabric variants, including GbE, sRIO, PCIe, and 10 GbE. Units are equipped with 600 MHz PowerPC 405 EX processor for MCMC functionality and switching management, and enable redundant system architectures with up to 12 AMCs, 2 cooling units, and 4 power units. To provide support for various telco...
Read More »
Embedded Box PC features integrated graphics accelerator.
Housed in 75 x 350 x 260 mm chassis, CB 753 Dual Head provides connections for 2 digital or 4 analog displays, making it suitable for fanless multi-display applications with high-resolution graphics. Unit is equipped with 2.26 GHz Intel Core 2 Duo Mobile processor and up to 8 GB DDR3 RAM. Configurable interfaces include 4x USB, 3x GB LAN, 4x RS232, PS/2 M+K, Line in, MIC In, 7.1 HD Audio, and 1x...
Read More »
CompactPCI SBC supports machine and factory control.
Combining 1.0 GHz Celeron processor 807UE with Intel-® QM77 Platform Controller Hub, 3U Model CP3003-V- provides 1 MB Smart Cache and up to 4 GB DDR3 1,333 MHz SDRAM memory. Double slot version offers comprehensive set of interfaces such as 1x VGA, 2x DisplayPort, 1x USB 3.0, 2x USB 2.0, 3x Gigabit Ethernet ports, and Serial port on front panel plus option to hold CFast module or up to 2x 2.5...
Read More »Standardization Group for Embedded Technologies (SGET) Inaugurated
Statutes, objectives and regulations now available for download from SGET website Munich, Germany - Kontron announces that the inaugural meeting was held for the SGET Standardization Group for Embedded Technologies eV. A group of embedded computing manufacturers have formed the registered association to drive standardization of embedded computing. The proclaimed aim of the association is to speed...
Read More »
Kontron Harnesses the Power of the 8-Core Intel Xeon Processor E5-2600 Family with Dual-Socket Bladed and Server Platforms
Telecom equipment manufacturers benefit from jump in multicore performance, I/O, memory and inter-processor bandwidth on new Kontron AdvancedTCA node blade and NEBS-3 rack mount server Montreal, Canada - Kontron today announced the official arrival of two new carrier grade products that channel the incredible performance and bandwidth of the new 8-core Intel Xeon processor E5-2600 family....
Read More »