Briney Tooling Systems (Division of Gemini Group)

Special Briney Dual Contact Cat50 Turning Toolholder Eliminates the Need for Customer to Re-Engineer Catalog of Lathe Stick Tools
Architectural & Civil Engineering Products

Special Briney Dual Contact Cat50 Turning Toolholder Eliminates the Need for Customer to Re-Engineer Catalog of Lathe Stick Tools

Recently, Briney Tooling Systems worked closely with a manufacturer to develop a special Dual Contact CAT50 stick turning toolholder for an Okuma MacTurn 550 milling/turning center.Â- The customer had some special turning stick tools that were 1.5-inches square and there was no standard for the lathe stick tools. Because Briney Tooling Systems is well-known for their custom and special...

Read More »
Precision Test Bars ensure spindle accuracy and alignment.
Construction Equipment and Supplies

Precision Test Bars ensure spindle accuracy and alignment.

With Precision Test Bars, users can confirm that machine spindle is running accurately. Each test bar is provided with certificate of accuracy that spells out bar diameter and gage length that is inspected and certified to 4 decimal places. Expanded test bar offering includes CAT40 and CAT50 models; BT30, BT40 and BT50 models; and HSK50A, HSK63A, HSK80A, and HSK100A models. Bars are supplied in...

Read More »
Special Briney Grinding Wheel Arbor Designed for Use on Grinder for Producing Shaped Bone Fragments for Surgical Grafting
Architectural & Civil Engineering Products

Special Briney Grinding Wheel Arbor Designed for Use on Grinder for Producing Shaped Bone Fragments for Surgical Grafting

Briney Tooling Systems is well-known for their custom and special toolholder design and build capabilities. They have a special design team in place that works daily with customer’s to design and build the special tools needed for a wide array of applications…that many times other toolholder manufacturers are unwilling to even attempt. Recently, Briney worked closely with a leading medical...

Read More »
Briney Tooling Systems to Feature 'Tru Position(TM)' End Mill Holders at the 2015 South-Tec Show
Architectural & Civil Engineering Products

Briney Tooling Systems to Feature 'Tru Position(TM)' End Mill Holders at the 2015 South-Tec Show

Briney Tooling Systems will feature their unique line of ‘Tru Position™’ End Mill Holders with dramatically reduced total indicator runout (T.I.R) of 0.0002-in at Booth No. 622 at the 2015 SOUTH-TEC Show at the Charlotte Convention Center in Charlotte, NC, October 27-29 2015. The Briney Tru Position End Mill Holders utilize a custom-engineered internal eccentric grinding technique developed...

Read More »
Briney Tooling Systems to Feature 'TRU POSITION(TM)' End Mill Holders at the 2015 WESTEC Show
Architectural & Civil Engineering Products

Briney Tooling Systems to Feature 'TRU POSITION(TM)' End Mill Holders at the 2015 WESTEC Show

Briney Tooling Systems will feature their unique line of ‘Tru Position™’ End Mill Holders with dramatically reduced total indicator runout (T.I.R) of 0.0002-in at Booth No. 1040 at the 2015 WESTEC Show in Los Angeles, CA, September 15-17. The Briney Tru Position End Mill Holders utilize a custom-engineered internal eccentric grinding technique developed by Briney that produces the reduced...

Read More »
Briney Thermax II
HVAC

Briney Thermax II

Briney Thermax II is a powerful compact induction heating unit for shrink-fit tooling. It's capable of shrinking in and out any design of shrink-fit tooling (ANSI, DIN etc.), plus high speed steel and carbide cutting tools. User friendly (PLC Controlled). Also, protects tool holder from exposure to over temperatures that cause shorter holder life. Has 4-cooling positions to handle multiple tools....

Read More »
Tabletop Shrink-Fit System suits smaller shops.
HVAC

Tabletop Shrink-Fit System suits smaller shops.

Thermax induction heating unit shrink-fits H-6 tolerance cutting steel and carbide cutting tools from .125-1.00 in. dia into V-flange and HSK Shrinker tool holders with tool lengths to 18.75 in. Preprogrammed, 7.5 kw unit offers pushbutton operation, provides 4 quick-change heating coils, and stores programs in integrated PLC. With 4 heat-sink cool-down positions, 220 V, 3-phase heating system...

Read More »
Shrink Fit Tool creates chatter-free machining.
Architectural & Civil Engineering Products

Shrink Fit Tool creates chatter-free machining.

Tru-Therm induction heating/cooling unit can handle toolholders and cutting tools from 3/16 to 2 in. dia. Four different size induction coils come with system. Coils can be changed in 5 sec without need to power down system. This allows operator to use most efficient size coil for every holder. Touch-screen programming and simple cutting tool menu allow operator to specify tool size and cutting...

Read More »
Special Briney Dual Contact Cat50 Turning Toolholder Eliminates the Need for Customer to Re-Engineer Catalog of Lathe Stick Tools
Architectural & Civil Engineering Products

Special Briney Dual Contact Cat50 Turning Toolholder Eliminates the Need for Customer to Re-Engineer Catalog of Lathe Stick Tools

Recently, Briney Tooling Systems worked closely with a manufacturer to develop a special Dual Contact CAT50 stick turning toolholder for an Okuma MacTurn 550 milling/turning center.Â- The customer had some special turning stick tools that were 1.5-inches square and there was no standard for the lathe stick tools. Because Briney Tooling Systems is well-known for their custom and special...

Read More »
Precision Test Bars ensure spindle accuracy and alignment.
Construction Equipment and Supplies

Precision Test Bars ensure spindle accuracy and alignment.

With Precision Test Bars, users can confirm that machine spindle is running accurately. Each test bar is provided with certificate of accuracy that spells out bar diameter and gage length that is inspected and certified to 4 decimal places. Expanded test bar offering includes CAT40 and CAT50 models; BT30, BT40 and BT50 models; and HSK50A, HSK63A, HSK80A, and HSK100A models. Bars are supplied in...

Read More »
Special Briney Grinding Wheel Arbor Designed for Use on Grinder for Producing Shaped Bone Fragments for Surgical Grafting
Architectural & Civil Engineering Products

Special Briney Grinding Wheel Arbor Designed for Use on Grinder for Producing Shaped Bone Fragments for Surgical Grafting

Briney Tooling Systems is well-known for their custom and special toolholder design and build capabilities. They have a special design team in place that works daily with customer’s to design and build the special tools needed for a wide array of applications…that many times other toolholder manufacturers are unwilling to even attempt. Recently, Briney worked closely with a leading medical...

Read More »
Briney Tooling Systems to Feature 'Tru Position(TM)' End Mill Holders at the 2015 South-Tec Show
Architectural & Civil Engineering Products

Briney Tooling Systems to Feature 'Tru Position(TM)' End Mill Holders at the 2015 South-Tec Show

Briney Tooling Systems will feature their unique line of ‘Tru Position™’ End Mill Holders with dramatically reduced total indicator runout (T.I.R) of 0.0002-in at Booth No. 622 at the 2015 SOUTH-TEC Show at the Charlotte Convention Center in Charlotte, NC, October 27-29 2015. The Briney Tru Position End Mill Holders utilize a custom-engineered internal eccentric grinding technique developed...

Read More »
Briney Tooling Systems to Feature 'TRU POSITION(TM)' End Mill Holders at the 2015 WESTEC Show
Architectural & Civil Engineering Products

Briney Tooling Systems to Feature 'TRU POSITION(TM)' End Mill Holders at the 2015 WESTEC Show

Briney Tooling Systems will feature their unique line of ‘Tru Position™’ End Mill Holders with dramatically reduced total indicator runout (T.I.R) of 0.0002-in at Booth No. 1040 at the 2015 WESTEC Show in Los Angeles, CA, September 15-17. The Briney Tru Position End Mill Holders utilize a custom-engineered internal eccentric grinding technique developed by Briney that produces the reduced...

Read More »
Briney Thermax II
HVAC

Briney Thermax II

Briney Thermax II is a powerful compact induction heating unit for shrink-fit tooling. It's capable of shrinking in and out any design of shrink-fit tooling (ANSI, DIN etc.), plus high speed steel and carbide cutting tools. User friendly (PLC Controlled). Also, protects tool holder from exposure to over temperatures that cause shorter holder life. Has 4-cooling positions to handle multiple tools....

Read More »
Tabletop Shrink-Fit System suits smaller shops.
HVAC

Tabletop Shrink-Fit System suits smaller shops.

Thermax induction heating unit shrink-fits H-6 tolerance cutting steel and carbide cutting tools from .125-1.00 in. dia into V-flange and HSK Shrinker tool holders with tool lengths to 18.75 in. Preprogrammed, 7.5 kw unit offers pushbutton operation, provides 4 quick-change heating coils, and stores programs in integrated PLC. With 4 heat-sink cool-down positions, 220 V, 3-phase heating system...

Read More »
Shrink Fit Tool creates chatter-free machining.
Architectural & Civil Engineering Products

Shrink Fit Tool creates chatter-free machining.

Tru-Therm induction heating/cooling unit can handle toolholders and cutting tools from 3/16 to 2 in. dia. Four different size induction coils come with system. Coils can be changed in 5 sec without need to power down system. This allows operator to use most efficient size coil for every holder. Touch-screen programming and simple cutting tool menu allow operator to specify tool size and cutting...

Read More »

All Topics