Times Microwave Systems
Wallingford, CT 06492
Test Cables facilitate wireless infrastructure testing.
SilverLine(TM) TuffGrip(TM) Test Cables employ hand grip at system test end, enabling user to apply as much hand resistance as necessary to make or break weatherproofed RF connections without wrenches or damage to cable. They include passivated stainless steel connectors and steel-reinforced flexible outer armor covering that resists cut-through and abrasion. TuffGrip(TM) is offered on test...
Read More »
Connectors and Prep Tools facilitate cable installation.
Designed for use with LMR-240 low loss cable, ST-240EZ tool prepares cable to exact dimensions in one step, while DBT-02 tool removes burrs from exposed center conductor. EZ non-solder connectors, which include QMA male, QMA male RA, SMA male, SMA male RA, and N male types, are supplied with adhesive-lined ATUM boot. Optimized to facilitate termination, all connectors are suited for use in True...
Read More »
Stainless Steel Connector suits low loss coaxial cables.
Designed for LMR-400 series coaxial cables, TC-400-NMH-RA-SS (3190-1668) N male right angle passivated connector exhibits low loss and optimal VSWR performance through highest ISM frequency band of 5.8 GHz. LMRÃ-® cables are flexible, non-kinking, RF transmission line cables suitable for use as antenna feeders, system jumpers, and interconnects.
Read More »
Solderless Connectors facilitate field installation.
Suited for LMR-240 low-loss coaxial cable, EZ-240-SM straight and EZ-240-SM-RA right angle SMA plugs attach to cable without soldering. Center contact attaches to center conductor of cable via beryllium-copper spring fingers, and outer contact crimps onto outer braid of cable. Each connector comes with dual-wall, adhesive-lined shrink boot for strain relief and weather protection.
Read More »
Solderless Connectors provide snap-on interface.
Suited for LMR-240 low-loss coaxial cable, QMA EZ non-solder connectors provide snap-on version of SMA interface. They are available in straight and right angle versions, designated EZ-240-QMAM (3190-1533) and EZ-240-QM-RA (3190-1539), respectively. LMRÃ-® cables are flexible, non-kinking, low-loss RF transmission line cables that are suitable for use as antenna feeders, system jumpers, and...
Read More »Hangers support flexible RF transmission line cables.
Suited for LMRÃ-® low loss coaxial cables, clip hangers are available for sizes 600-1,700 and standard hangers for sizes 400-1,700. Designed for supporting single runs of cable in wireless systems, both types of hangers are fabricated from corrosion-resistant, stainless steel for use in extreme weather conditions. Clip hangers feature locking mechanism, while standard hangers have pre-formed...
Read More »
Coaxial Cables offer male reverse thread connector.
Designed for LMR-400 Series low-loss coaxial cables, TC-400-TM-RT TNC Connector is suitable for unlicensed wireless communication applications in ISM frequency bands. Connector can be used at upper ISM bands of 2.4-5.8 GHz because of its low loss and low VSWR. Flexible, non-kinking, RF transmission line cables are suitable for antenna feeders, system jumpers, and interconnects.
Read More »
Cable Assemblies feature no attenuation from 0.5-18 GHz.
Utilizing lightweight coaxial cables, Zero dB(TM) Assemblies are intended for fighter aircraft, helicoper, transport aircraft, and UAV platforms.
Read More »Coaxial Cable Assemblies suit demanding environments.
SiO2(TM) Silicon Dioxide coaxial cable assemblies meet requirements of microwave interconnect applications in aircraft, space, shipboard, and ground-based systems. Hermetically sealed intermediate sections, laser-welded to cable, permit use of all Times MiltechÃ-® connectors. Non-replaceable connectors are also available, and all connectors include crack-free, fired glass dielectric seal.
Read More »
Coaxial Cable Assemblies suit mobile cell sites.
Woven Cable Assemblies may utilize any cables including LMRÃ-® and TCOM(TM) and can be supplied pre-terminated with connectors. Cables are woven together using variety of materials to maintain low profile and organized cable configuration. For mobile, emergency, and portable cell sites where cables are unwound and re-wound numerous times, concept speeds up winding and unwinding process and...
Read More »
Test Cables facilitate wireless infrastructure testing.
SilverLine(TM) TuffGrip(TM) Test Cables employ hand grip at system test end, enabling user to apply as much hand resistance as necessary to make or break weatherproofed RF connections without wrenches or damage to cable. They include passivated stainless steel connectors and steel-reinforced flexible outer armor covering that resists cut-through and abrasion. TuffGrip(TM) is offered on test...
Read More »
Connectors and Prep Tools facilitate cable installation.
Designed for use with LMR-240 low loss cable, ST-240EZ tool prepares cable to exact dimensions in one step, while DBT-02 tool removes burrs from exposed center conductor. EZ non-solder connectors, which include QMA male, QMA male RA, SMA male, SMA male RA, and N male types, are supplied with adhesive-lined ATUM boot. Optimized to facilitate termination, all connectors are suited for use in True...
Read More »
Stainless Steel Connector suits low loss coaxial cables.
Designed for LMR-400 series coaxial cables, TC-400-NMH-RA-SS (3190-1668) N male right angle passivated connector exhibits low loss and optimal VSWR performance through highest ISM frequency band of 5.8 GHz. LMRÃ-® cables are flexible, non-kinking, RF transmission line cables suitable for use as antenna feeders, system jumpers, and interconnects.
Read More »
Solderless Connectors facilitate field installation.
Suited for LMR-240 low-loss coaxial cable, EZ-240-SM straight and EZ-240-SM-RA right angle SMA plugs attach to cable without soldering. Center contact attaches to center conductor of cable via beryllium-copper spring fingers, and outer contact crimps onto outer braid of cable. Each connector comes with dual-wall, adhesive-lined shrink boot for strain relief and weather protection.
Read More »
Solderless Connectors provide snap-on interface.
Suited for LMR-240 low-loss coaxial cable, QMA EZ non-solder connectors provide snap-on version of SMA interface. They are available in straight and right angle versions, designated EZ-240-QMAM (3190-1533) and EZ-240-QM-RA (3190-1539), respectively. LMRÃ-® cables are flexible, non-kinking, low-loss RF transmission line cables that are suitable for use as antenna feeders, system jumpers, and...
Read More »Hangers support flexible RF transmission line cables.
Suited for LMRÃ-® low loss coaxial cables, clip hangers are available for sizes 600-1,700 and standard hangers for sizes 400-1,700. Designed for supporting single runs of cable in wireless systems, both types of hangers are fabricated from corrosion-resistant, stainless steel for use in extreme weather conditions. Clip hangers feature locking mechanism, while standard hangers have pre-formed...
Read More »
Coaxial Cables offer male reverse thread connector.
Designed for LMR-400 Series low-loss coaxial cables, TC-400-TM-RT TNC Connector is suitable for unlicensed wireless communication applications in ISM frequency bands. Connector can be used at upper ISM bands of 2.4-5.8 GHz because of its low loss and low VSWR. Flexible, non-kinking, RF transmission line cables are suitable for antenna feeders, system jumpers, and interconnects.
Read More »
Cable Assemblies feature no attenuation from 0.5-18 GHz.
Utilizing lightweight coaxial cables, Zero dB(TM) Assemblies are intended for fighter aircraft, helicoper, transport aircraft, and UAV platforms.
Read More »Coaxial Cable Assemblies suit demanding environments.
SiO2(TM) Silicon Dioxide coaxial cable assemblies meet requirements of microwave interconnect applications in aircraft, space, shipboard, and ground-based systems. Hermetically sealed intermediate sections, laser-welded to cable, permit use of all Times MiltechÃ-® connectors. Non-replaceable connectors are also available, and all connectors include crack-free, fired glass dielectric seal.
Read More »
Coaxial Cable Assemblies suit mobile cell sites.
Woven Cable Assemblies may utilize any cables including LMRÃ-® and TCOM(TM) and can be supplied pre-terminated with connectors. Cables are woven together using variety of materials to maintain low profile and organized cable configuration. For mobile, emergency, and portable cell sites where cables are unwound and re-wound numerous times, concept speeds up winding and unwinding process and...
Read More »