RF Industries

Low PIM 4.3-10 Adapters support mobile communications.
Construction Equipment and Supplies

Low PIM 4.3-10 Adapters support mobile communications.

Designed to meet IEC 61169-54 standard, 4.3-10 Connectors are IP68-rated and will support up to 500 W at 2 GHz. Return loss and PIM performance is independent of torque applied and cable can be flexed with little detrimental effect. In base stations, 4.3-10 interface is used in remote radio heads, jumpers, and antennas. Where RF signals must be terminated, combined or split in multiband, multi...

Read More »
BNC Bulkhead Adapter meets weatherproof requirements.
Construction Equipment and Supplies

BNC Bulkhead Adapter meets weatherproof requirements.

Incorporating glass bead that hermetically seals connector to withstand 100 psi leak test, Model Z-1142 may be used in IP67 or IP68 applications in mated and unmated condition. All interface dimensions are designed to IAW MIL-C-39012 specifications and overall dimensions to UG-492D/U specification. Manufactured with silver-plated brass body and gold-plated center contacts, adapter features 50 Ω...

Read More »
Agricultural & Farming Products

Custom Multi-Conductor Cable Harness for Industrial Gas Turbine

Gas turbine cable_300x145A manufacturer of gas turbines used for industrial applications required a wire harness for monitoring equipment measuring the vacuum in and out temperatures. RF Industries Multi-Conductor product group was selected as a vendor because of experience with ruggedized assemblies used in high vibration and high temperature environments. Close proximity between RF Industries...

Read More »
QMA Cable Assemblies suit distributed antenna systems.
Electrical Equipment & Systems

QMA Cable Assemblies suit distributed antenna systems.

Manufactured using Times Microwave TFT-402-LF plenum rated, low PIM flexible cable, QMA Cable Assemblies are terminated with QMA snap lock male straight or right angle connectors rated up to 6 GHz, and meet UL910 fire requirements for in-building applications. PIM performance is less than -140 dBc using 2 tones at 20 W. Less than -155 dBc PIM performance is available on premium QMA straight...

Read More »
Low PIM .141 Conformable Cable Assemblies Are Alternative to Semi-Rigid for Distributed Antenna System (DAS) Installations
Electrical Equipment & Systems

Low PIM .141 Conformable Cable Assemblies Are Alternative to Semi-Rigid for Distributed Antenna System (DAS) Installations

Standard semi-rigid .141 cable assemblies with a solid jacket metal shield offer excellent electrical and low PIM performance. For installations with cable bends, special equipment is required to form the cable, requiring advance planning and longer lead times. RF Industries conformable semi-rigid cable assemblies are manufactured with tin filled, braided outer conductor that exhibits similar...

Read More »
Low PIM Adapter mates QMA to N type interface.
Construction Equipment and Supplies

Low PIM Adapter mates QMA to N type interface.

Used in wireless infrastructure applications, RQA-5478 offers snap lock connection, quick connect/disconnect feature, and electrical performance up to 6 GHz. Manufactured withÂ- machined brass body plated in tri-metal (white-bronze) finish, adapter features QMA female to N male interface that allows connection of QMA male terminated cable assemble to equipment with N female...

Read More »
Precision High Frequency SSMA Connector Operates in High Vibration Applications
Construction Equipment and Supplies

Precision High Frequency SSMA Connector Operates in High Vibration Applications

A military aerospace manufacturer with a custom antenna design required an RF coaxial connector that would perform in a high vibration environment. The connector's mechanical requirements include termination onto .085 inch semi-rigid cable, chassis mounting and SSMA interface. The electrical requirements included operating frequency up to 26 Ghz. A standard chassis mount SSMA connector would meet...

Read More »
Custom Multiconductor Cable Harness for Industrial Laser Application
Agricultural & Farming Products

Custom Multiconductor Cable Harness for Industrial Laser Application

A manufacturer of industrial lasers used for etching integrated circuit wafers required a series of cables and harnesses to connect the various functions of the machine. Included in the requirement was a single entry point for the cables to pass through a bulkhead. The electronic signals for the cabling included RF, power, data and video. Due to the industrial application, the assemblies needed...

Read More »
DIN Adapter suits wireless infrastructure applications.
Construction Equipment and Supplies

DIN Adapter suits wireless infrastructure applications.

Expanding 7/16 DIN connector and adapter line, P2RFD-1654-4 Female to Female Bulkhead Adapter is manufactured with machined brass body and tri-metal plating. Unit features PIM rating of better than -155 dBc at 2X43 dBm and VSWRÂ- of less than 1.2:1 within operating frequency of 0–8 GHz. Equipped with recessed O-ring for weather sealing, adapter has double flats machined on 2 sides...

Read More »
Electrical Equipment & Systems

Mini DIN Adapters suit low PIM performance applications.

Both 4.1/9.5 (Mini) DIN male to female right angle (Part No. RFD-4195-1952) and straight (Part No. RFD-4195-1950) adapters have hex nuts on male interface sized to facilitate mating via torque wrench. Right angle part features radius internal design that provides constant 50 Ω impedance for optimum electrical performance to 7.5 GHz, and all adapters are manufactured with brass bodies in...

Read More »
Low PIM 4.3-10 Adapters support mobile communications.
Construction Equipment and Supplies

Low PIM 4.3-10 Adapters support mobile communications.

Designed to meet IEC 61169-54 standard, 4.3-10 Connectors are IP68-rated and will support up to 500 W at 2 GHz. Return loss and PIM performance is independent of torque applied and cable can be flexed with little detrimental effect. In base stations, 4.3-10 interface is used in remote radio heads, jumpers, and antennas. Where RF signals must be terminated, combined or split in multiband, multi...

Read More »
BNC Bulkhead Adapter meets weatherproof requirements.
Construction Equipment and Supplies

BNC Bulkhead Adapter meets weatherproof requirements.

Incorporating glass bead that hermetically seals connector to withstand 100 psi leak test, Model Z-1142 may be used in IP67 or IP68 applications in mated and unmated condition. All interface dimensions are designed to IAW MIL-C-39012 specifications and overall dimensions to UG-492D/U specification. Manufactured with silver-plated brass body and gold-plated center contacts, adapter features 50 Ω...

Read More »
Agricultural & Farming Products

Custom Multi-Conductor Cable Harness for Industrial Gas Turbine

Gas turbine cable_300x145A manufacturer of gas turbines used for industrial applications required a wire harness for monitoring equipment measuring the vacuum in and out temperatures. RF Industries Multi-Conductor product group was selected as a vendor because of experience with ruggedized assemblies used in high vibration and high temperature environments. Close proximity between RF Industries...

Read More »
QMA Cable Assemblies suit distributed antenna systems.
Electrical Equipment & Systems

QMA Cable Assemblies suit distributed antenna systems.

Manufactured using Times Microwave TFT-402-LF plenum rated, low PIM flexible cable, QMA Cable Assemblies are terminated with QMA snap lock male straight or right angle connectors rated up to 6 GHz, and meet UL910 fire requirements for in-building applications. PIM performance is less than -140 dBc using 2 tones at 20 W. Less than -155 dBc PIM performance is available on premium QMA straight...

Read More »
Low PIM .141 Conformable Cable Assemblies Are Alternative to Semi-Rigid for Distributed Antenna System (DAS) Installations
Electrical Equipment & Systems

Low PIM .141 Conformable Cable Assemblies Are Alternative to Semi-Rigid for Distributed Antenna System (DAS) Installations

Standard semi-rigid .141 cable assemblies with a solid jacket metal shield offer excellent electrical and low PIM performance. For installations with cable bends, special equipment is required to form the cable, requiring advance planning and longer lead times. RF Industries conformable semi-rigid cable assemblies are manufactured with tin filled, braided outer conductor that exhibits similar...

Read More »
Low PIM Adapter mates QMA to N type interface.
Construction Equipment and Supplies

Low PIM Adapter mates QMA to N type interface.

Used in wireless infrastructure applications, RQA-5478 offers snap lock connection, quick connect/disconnect feature, and electrical performance up to 6 GHz. Manufactured withÂ- machined brass body plated in tri-metal (white-bronze) finish, adapter features QMA female to N male interface that allows connection of QMA male terminated cable assemble to equipment with N female...

Read More »
Precision High Frequency SSMA Connector Operates in High Vibration Applications
Construction Equipment and Supplies

Precision High Frequency SSMA Connector Operates in High Vibration Applications

A military aerospace manufacturer with a custom antenna design required an RF coaxial connector that would perform in a high vibration environment. The connector's mechanical requirements include termination onto .085 inch semi-rigid cable, chassis mounting and SSMA interface. The electrical requirements included operating frequency up to 26 Ghz. A standard chassis mount SSMA connector would meet...

Read More »
Custom Multiconductor Cable Harness for Industrial Laser Application
Agricultural & Farming Products

Custom Multiconductor Cable Harness for Industrial Laser Application

A manufacturer of industrial lasers used for etching integrated circuit wafers required a series of cables and harnesses to connect the various functions of the machine. Included in the requirement was a single entry point for the cables to pass through a bulkhead. The electronic signals for the cabling included RF, power, data and video. Due to the industrial application, the assemblies needed...

Read More »
DIN Adapter suits wireless infrastructure applications.
Construction Equipment and Supplies

DIN Adapter suits wireless infrastructure applications.

Expanding 7/16 DIN connector and adapter line, P2RFD-1654-4 Female to Female Bulkhead Adapter is manufactured with machined brass body and tri-metal plating. Unit features PIM rating of better than -155 dBc at 2X43 dBm and VSWRÂ- of less than 1.2:1 within operating frequency of 0–8 GHz. Equipped with recessed O-ring for weather sealing, adapter has double flats machined on 2 sides...

Read More »
Electrical Equipment & Systems

Mini DIN Adapters suit low PIM performance applications.

Both 4.1/9.5 (Mini) DIN male to female right angle (Part No. RFD-4195-1952) and straight (Part No. RFD-4195-1950) adapters have hex nuts on male interface sized to facilitate mating via torque wrench. Right angle part features radius internal design that provides constant 50 Ω impedance for optimum electrical performance to 7.5 GHz, and all adapters are manufactured with brass bodies in...

Read More »

All Topics