J.W. Winco, Inc.

New GN 328 and GN 428 Cabinet U Handles Feature the Latest Industrial Design Developments
Mechanical Components and Assemblies

New GN 328 and GN 428 Cabinet U Handles Feature the Latest Industrial Design Developments

The Series GN 328 and GN 428 are cabinet U handles from JW Winco, Inc., they are made from solid aluminum and are available with either tapped or through holes. Being recognized for their stability and ergonomic design, the handles prove to reflect the latest developments in industrial design. The GN 428 is available in 6 lengths with either anodized or powder-coated surfaces. The GN 328 is a...

Read More »
New Horizontal Locking Toggle Clamps from JW Winco Feature a Spring-Loaded Safety Hook Latch
Electrical Equipment & Systems

New Horizontal Locking Toggle Clamps from JW Winco Feature a Spring-Loaded Safety Hook Latch

Winco presents GN 820.3 (Acting) and GN 851.3 and GN 852.3 (Latch Type) Toggle Clamps with steel and stainless steel construction. The GN 852.3 clamps are designed to ensure high holding capacities. The units are compliant to RoHS standards and work according to toggle principle of the lever and clamping bar moving in the opposite direction. The unit’s circular movement of handle is transformed...

Read More »
New GN 115.9 Latches are Compliant to RoHS Standards
Fasteners & Hardware

New GN 115.9 Latches are Compliant to RoHS Standards

JW Winco’s GN 115.9 Latches feature 15 different offsets that allow latch distance A to be set between 4 and 32 mm. Units are offered with zinc die cast housing with zinc plated finish and the plastic locating ring coated black with a textured finish. Latches come with a push-to-turn safety function that secures spindle in place. Unit can be turned 90° by pressing down the operating element.

Read More »
JW Winco Introduces Washers with RoHS Compliance
Fasteners & Hardware

JW Winco Introduces Washers with RoHS Compliance

Winco’s Washers with axial friction bearings are used in connection with items such as GN 300 Series (adjustable levers) or GN 835 Series (wing screw) with threaded studs. Units come with AISI 303 standard stainless steel body and sliding disk made from Polyamide 46 glass fiber reinforced technopolymer plastic that is resistant to temperatures up to 250°F.

Read More »
New Steel Telescopic Slides Feature Rolled Sheet Metal Telescopic Rails
Laboratory and Research Supplies and Equipment

New Steel Telescopic Slides Feature Rolled Sheet Metal Telescopic Rails

Winco’s GN 1400 Steel Telescopic Slides are available with full, partial, and double-sided full extensions and can handle loads between 220 and 3100 N of force per pair. Units are constructed of zinc plated steel with blue passivated finish and come with rubber stops and steel bearings. The slides can be operated in -20°C to 100°C temperature and are made up to two, three, or four...

Read More »
New Zinc Die-Cast Flat Tension Levers are Compliant to RoHS Standards
Mechanical Components and Assemblies

New Zinc Die-Cast Flat Tension Levers are Compliant to RoHS Standards

JW Winco’s GN 126 and GN 126.1 Zinc Die-Cast Flat Adjustable Tension Levers are offered in steel and stainless steel with tapped or plain bore insert or threaded stud. Levers feature zinc die-cast handle with either black or silver textured finish whereas the hub cover is black or light gray. The adjustable levers are suitable for applications where swiveling in confined space is needed or...

Read More »
New Inch Size Mounting Clamps Come with Zinc Die Cast Adjustable Hand Lever
Electrical Equipment & Systems

New Inch Size Mounting Clamps Come with Zinc Die Cast Adjustable Hand Lever

J. W. Winco’s Inch Size GN 784 Mounting Clamps come with swivel joints for variable adjustment of ball pivot in the rotation range. Units come in anodized black aluminum housing, stainless steel threaded stud and retaining screw. The mounting clamps are used in adjusting scanners, cameras, lighting and monitors. Units can be mounted from below using an internal thread or can be assembled with...

Read More »
New GN 328 and GN 428 Cabinet U Handles Feature the Latest Industrial Design Developments
Mechanical Components and Assemblies

New GN 328 and GN 428 Cabinet U Handles Feature the Latest Industrial Design Developments

The Series GN 328 and GN 428 are cabinet U handles from JW Winco, Inc., they are made from solid aluminum and are available with either tapped or through holes. Being recognized for their stability and ergonomic design, the handles prove to reflect the latest developments in industrial design. The GN 428 is available in 6 lengths with either anodized or powder-coated surfaces. The GN 328 is a...

Read More »
New Horizontal Locking Toggle Clamps from JW Winco Feature a Spring-Loaded Safety Hook Latch
Electrical Equipment & Systems

New Horizontal Locking Toggle Clamps from JW Winco Feature a Spring-Loaded Safety Hook Latch

Winco presents GN 820.3 (Acting) and GN 851.3 and GN 852.3 (Latch Type) Toggle Clamps with steel and stainless steel construction. The GN 852.3 clamps are designed to ensure high holding capacities. The units are compliant to RoHS standards and work according to toggle principle of the lever and clamping bar moving in the opposite direction. The unit’s circular movement of handle is transformed...

Read More »
New GN 115.9 Latches are Compliant to RoHS Standards
Fasteners & Hardware

New GN 115.9 Latches are Compliant to RoHS Standards

JW Winco’s GN 115.9 Latches feature 15 different offsets that allow latch distance A to be set between 4 and 32 mm. Units are offered with zinc die cast housing with zinc plated finish and the plastic locating ring coated black with a textured finish. Latches come with a push-to-turn safety function that secures spindle in place. Unit can be turned 90° by pressing down the operating element.

Read More »
JW Winco Introduces Washers with RoHS Compliance
Fasteners & Hardware

JW Winco Introduces Washers with RoHS Compliance

Winco’s Washers with axial friction bearings are used in connection with items such as GN 300 Series (adjustable levers) or GN 835 Series (wing screw) with threaded studs. Units come with AISI 303 standard stainless steel body and sliding disk made from Polyamide 46 glass fiber reinforced technopolymer plastic that is resistant to temperatures up to 250°F.

Read More »
New Steel Telescopic Slides Feature Rolled Sheet Metal Telescopic Rails
Laboratory and Research Supplies and Equipment

New Steel Telescopic Slides Feature Rolled Sheet Metal Telescopic Rails

Winco’s GN 1400 Steel Telescopic Slides are available with full, partial, and double-sided full extensions and can handle loads between 220 and 3100 N of force per pair. Units are constructed of zinc plated steel with blue passivated finish and come with rubber stops and steel bearings. The slides can be operated in -20°C to 100°C temperature and are made up to two, three, or four...

Read More »
New Zinc Die-Cast Flat Tension Levers are Compliant to RoHS Standards
Mechanical Components and Assemblies

New Zinc Die-Cast Flat Tension Levers are Compliant to RoHS Standards

JW Winco’s GN 126 and GN 126.1 Zinc Die-Cast Flat Adjustable Tension Levers are offered in steel and stainless steel with tapped or plain bore insert or threaded stud. Levers feature zinc die-cast handle with either black or silver textured finish whereas the hub cover is black or light gray. The adjustable levers are suitable for applications where swiveling in confined space is needed or...

Read More »
New Inch Size Mounting Clamps Come with Zinc Die Cast Adjustable Hand Lever
Electrical Equipment & Systems

New Inch Size Mounting Clamps Come with Zinc Die Cast Adjustable Hand Lever

J. W. Winco’s Inch Size GN 784 Mounting Clamps come with swivel joints for variable adjustment of ball pivot in the rotation range. Units come in anodized black aluminum housing, stainless steel threaded stud and retaining screw. The mounting clamps are used in adjusting scanners, cameras, lighting and monitors. Units can be mounted from below using an internal thread or can be assembled with...

Read More »
Company News

JW Winco Celebrates 40 Years of Strength in Standard Parts

Record sales growth a testament to Winco’s continued leadership, investment, and innovation in the standard parts industry NEW BERLIN, WI – May marks the 40th anniversary and success of JW Winco, Inc., A Ganter Company. Since its beginnings in 1978, family-owned Winco continues to lead a new generation of innovation and solutions for the standard parts industry. Winco saw sales increase by...

Read More »

All Topics