J.W. Winco, Inc.
New Berlin, WI 53151
Rod End Bearings come in metric sizes.
Available in threaded stem or tapped type models, Self-Lubricating Rod End Bearings control and link mechanisms in all types of machines. Units feature zinc-plated steel rod end body, bronze external ring, and ball socket made of 100 Cr6 bearing steel, hardened and ground. With operating temperature of -22 to 300Ã-
Read More »Metric Fork Heads are available with 3 thread types.
Primarily used with pneumatic or hydraulic cylinders, Metric Fork Heads (yokes) are available with clevis pin and circlip or clevis pin with snap-on securing collar. Fork body is manufactured from steel, with zinc-plated, blue passivated finish. Stainless steel versions are available upon request. Standard thread types are available in M4 x .7 through M20 x 2.5 thread sizes with pin diameters...
Read More »T-Angle Connector Clamps fit metric tubing.
Metric Aluminum, Split Assembly, T-Angle Connector Clamps are available in black powder coated finish or natural color matte shot-blasted finish. Offered in round or square combinations, bores are designed for metric tubing types GN 990 or DIN 2391, DIN 2395, and DIN 2462. Fastener choices include socket cap screws, hex cap screws, or adjustable levers. Clamps are suited for modular light duty...
Read More »Oil Breather Plugs come with or without splash guards.
Suited for hydraulic power packs, oil breather plugs are made of orange polyamide technopolymer plastic with oil label. Threaded body is black technopolymer plastic, and air filter is polyester polyurethane foam mesh. Resistant to solvents, oils, grease, and other chemical agents, plugs are offered with NPT pipe threads as standard or metric and BSPP threads upon request. Products are rated at...
Read More »Rollers and Tires are offered with variety of options.
Metric pallet truck rollers are available with ExtrathaneÃ-® polyurethane tread and aluminum, steel, stainless steel, or cast iron wheel centers, with and without ball bearings. Load capacities range from 750-2,425 lb, and wheel/roller diameters range from 82-200 mm. With load capacities from 22-540 lb, Metric guide rollers with Extrathane tread are available with or without steel wheel...
Read More »Antistatic Swivel Casters handle loads from 220-285 lb.
Antistatic Synthetic Metric Swivel Casters feature glass-fiber reinforced plastic swivel brackets, double-sealed grooved ball bearings, and 2-stage directional and wheel brake locks. With diameters of 100 and 125 mm, TPS Series wheels have non-marking, vulcanized thermoplastic rubber treads with 85Ã-º shore A hardness. Series PTH wheels come in 150 and 200 mm sizes with non-marking,...
Read More »Swivel Casters handle loads from 220-285 lb.
Offered in wheel diameters from 100 200 mm, Metric Synthetic Swivel Casters feature swivel brackets made of glass-fiber reinforced synthetic plastic, with double-sealed grooved ball bearings in swivel head, and combination 2-stage directional and wheel brake locks. Wheels have non-marking thermoplastic rubber treads, and centers of gray polypropylene with ball bearings and thread guard. Standard...
Read More »
Connector Clamps come in 2-way and base plate versions.
Metric Aluminum Two-Way and Base Plate Connector Clamps are available in black powder coated finish or natural color with matte shot-blast finish. Clamping bores are machined and designed for metric tubing types GN 990, DIN 2391, DIN 2395, and DIN 2462. Clamp fastener assembly choices include socket cap screws, hex cap screws, or adjustable levers. Applications include vertical or horizontal tube...
Read More »
Noise-Absorbing Metric Casters have nylon wheels.
Offered with swivel or fixed brackets made of stamped steel, abrasion-resistant casters offer smooth running performance for loads to 330 lb. Swivel type has double ball bearings in swivel head and is available with stop-fix brake. Available in 100 or 125 mm dia, wheels are natural white nylon with gray elastic solid rubber inner cushion ring that absorbs noise (-10 dB). Wheel centers are black...
Read More »
Metric Casters feature heat-resistant tires.
Offered in wheel diameters from 100-200 mm, BlickleÃ-® Hot Metric Casters come with swivel or fixed brackets made of stamped steel. Brackets feature bolted zinc-plated wheel axle with heat-resistant grease and adjusted bearing play. Wheels are black heat-resistant solid rubber, 80Ã-º Shore A, with roller bearings and rims of zinc-plated stamped steel. Casters are suitable for temperatures...
Read More »