Forrest Manufacturing Company

Woodworking Blade creates quality mortise, tenon joints.
Machinery & Machining Tools

Woodworking Blade creates quality mortise, tenon joints.

Intended for use by advanced woodworkers, Duraline Tenoning Blade facilitates and accelerates production of clean, reliable mortise and tenon joints. Tenon can be created in 2 steps, and perimeter concentricity and side runout are rated at ±.001. Suited for use with most all types of tenoning jigs, product is engineered from corrosion-resistant C-4 micrograin carbide and has 60 teeth as...

Read More »
Forrest's Square-Top Woodworker II Blades Deliver Absolute 90° Bottom Grooves Without Score Marks
Machinery & Machining Tools

Forrest's Square-Top Woodworker II Blades Deliver Absolute 90° Bottom Grooves Without Score Marks

Serious Woodworkers Increasingly Recognize These Blades as Essential for Producing Quality Finger Joints, Box Joints, Rabbets, and Other Critical Cuts CLIFTON, New Jersey-Jay Forrest, Vice President of Forrest Manufacturing, announced today that the company's two Square-Top Woodworker II blades continue to grow in popularity among woodworkers and serious hobbyists. There was a time when these...

Read More »
Woodworking Saw Blades suit plunge cut circular saws.
Machinery & Machining Tools

Woodworking Saw Blades suit plunge cut circular saws.

Custom WoodWorker I Blades are available as 20 mm bore/160 mm blade for Festool TS 55 EQ Model saw and as 30 mm bore/210 mm blade for TS 75 EQ Model saw. Blades deliver high quality cross-cuts with both hardwoods and softwoods, eliminating problem of bottom splintering when cross-cutting ply veneers of oak and birch. Blades also feature optimal perimeter concentricity and side runout of...

Read More »
Carbide 12 in. Saw Blade has 90-tooth, cool-running design.
Machinery & Machining Tools

Carbide 12 in. Saw Blade has 90-tooth, cool-running design.

Featuring 90 teeth, 12 in. diameter, and 5/8 in. center hole, Signature Line Chop Master blade (Catalog No. CM12905115A) may be used on any 12 in. sliding compound miter saw, chop saw, or radial arm saw. Cool running design enables quiet, smooth cuts at any angle without bottom splintering, side scoring, or vibration. Made with corrosion-resistant C-4 micro-grain carbide, blade features angled...

Read More »
Saw Blade minimizes woodworking waste.
Machinery & Machining Tools

Saw Blade minimizes woodworking waste.

Designed to work with lighter duty saws, Ultra Thin 080 Woodworker II has .080 in. kerf and .060 in. body for minimal resistance when cutting. Blade thinness, coupled with alternate top bevel (ATB) grind, allows carbide-tipped teeth to cut with scoring action, minimizing resistance and tearout while promoting precision. Engineered from corrosion-resistant C-4 micrograin carbide, hand-straightened...

Read More »
Machinery & Machining Tools

Saw Blades fit trim and plunge saws.

Made of corrosion-resistant C-4 micrograin carbide, Woodworker II and Woodworker I Blades are 40-tooth, alternate top bevel blades available in 4 3/8, 4 Â-½, and 5 3/8 in. diameters with 20 mm, 3/8 in., and 10 mm bores, respectively, to fit Makita®, Porter-Cable, and DeWalt® skill saws. Blades have 20° hook, so each tooth leans forward to help pull wood into blade....

Read More »
Forrest Manufacturing Offers Accessories to Improve Saw Blade Performance
Cleaning Products & Equipment

Forrest Manufacturing Offers Accessories to Improve Saw Blade Performance

SuperBar(TM) and MasterPlate(TM) Tools Tune and Align To Ensure Accurate Blade Angles and Cuts CLIFTON, New Jersey - Forrest Manufacturing, renowned for its quality blades, is now offering the American-made SuperBar(TM) and MasterPlate(TM) tools to enable woodworkers to tune up, align, and calibrate table saws for maximum saw blade performance. Even the finest saw blades won't produce quality...

Read More »
Saw Blade offers optimized cross-cutting capability.
Machinery & Machining Tools

Saw Blade offers optimized cross-cutting capability.

Suited for table, panel, and circular saws, 1048 Woodworker II features 48 teeth, 20° face hook, and 25° bevel, making it suited for cross-cutting everything from soft woods to plywood veneers. Sharp points allow blade to cleanly slice through wood fibers as it cuts across grain and to operate quietly with minimized vibration. Available in 10 in. diameter with 1/8 in. kerf, and 5/8...

Read More »
Saw Blade features 90 teeth and optimized angles.
Machinery & Machining Tools

Saw Blade features 90 teeth and optimized angles.

Available in 10 and 12 in. diameters with 5/8 or 1 in. center holes, Signature Line Chop Master blade cuts any wood or composite material and has angled carbide points for minimized cutting pressure without bottom splintering, side scoring, or vibration. Unit features corrosion-resistant C-4 micrograin carbide saw blade tips, optimal perimeter concentricity, minimal noise, and side runout to...

Read More »
Dado Sets cut thin-width grooves.
Machinery & Machining Tools

Dado Sets cut thin-width grooves.

Available in 2 different sets, Thin Kerf Dados cut grooves in thin plywood, MDF, or melamine boards. Two-piece set includes two 24-tooth outside saw blades and set of magnetic adjusting shims for 3/16 in. cuts, while 3-piece set includes outside saw blades plus 1/16 in. chipper with magnetic shims for creating cuts from 3/16 to Â-¼ in. Both work on table or radial arm saws with 5/8 in. bore....

Read More »

All Topics