Heinrich Company

Portable Shear and Rod Cutter can be vice or bench mounted.
Portable Tools

Portable Shear and Rod Cutter can be vice or bench mounted.

Weighing 17 lb, No. 1 Portable Shear has offset frame constructed to permit shearing of wide sheets, straight cuts, or outside curves. Blades are made of tool steel and can be removed for sharpening. With 1/8 in. mild steel shear capacity and 5/16 in. mild steel rod-cutting capacity, product features 24 in. handle mechanism that works in compound fashion to facilitate cutting. Special latch is...

Read More »
Low-Profile Vise offers single-handed operation.
Portable Tools

Low-Profile Vise offers single-handed operation.

Measuring 4 in. wide and 3 in. tall, Camlock Vise facilitates setup of small- to medium-sized runs. Hand knob adjusts to desired open position, and short horizontal movement of locking lever clamps or releases part. To eliminate wasted movement, max jaw travel is 5/16 in. Recessed parallel jaw inserts keep work level, and hollow base allows for clear-through drilling. Unit weighs 23 lb and...

Read More »
Self-Centering Vise delivers consistent movement.
Portable Tools

Self-Centering Vise delivers consistent movement.

Offered in jaw widths of 2, 6, and 8 in., self-centering vises handle stock sizes from Â-¼-9 in. Maximum jaw opening can be adjusted via stops, and set of hardened and ground horizontal v-jaws is offered with each size. Operated with double-acting piston type air cylinders that produce from 15-33 times power factor, vises have recommended max air pressure of 120 psi. Gear and rack assembly...

Read More »
Drill Consistent Cross-Holes in Stock up to 2-1/2"

Drill Consistent Cross-Holes in Stock up to 2-1/2"

Racine, WI - March 9, 2006 - Heinrich Company's family of Adjustable Cross-hole Drill Jigs includes three sizes in both manual and air-operated versions. They are designed for precision cross-hole drilling to round or hexagon stock and use regular SF" type drill bushings. Each unit comes with a fully adjustable end stop for locating the work. The stop can be used from either side of the fixture....

Read More »
Architectural & Civil Engineering Products

Collet Holder features air-operated design.

Using standard 5C collets, hardened and ground 1-AC Air Collet Fixture holds up to 1 1/8 in. stock or through-stock up to 1 7/64 in. Step-chuck collets and expanding collets can also be used. With max recommended air pressure of 120 psi, double-acting, piston type air cylinder develops holding power 18 x air line pressure. Featuring 2 lugs for mounting, holder can be mounted horizontally or...

Read More »

Bench Punch provides 5 tons of capacity.

Featuring 8 in. throat and 26 in. long crank handle, Deep Throat Bench Punch allows users to punch hole in center of circle with 16 in. diameter. Holes as large as Â-½ in. diameter can be punched in 1/8 in. mild steel. All wearing parts are hardened and ground. Wide selection of round and square punches and dies is available.

Read More »
Mini Valve suits single-acting vises and air mechanisms.
Fluid & Gas Flow Equipment

Mini Valve suits single-acting vises and air mechanisms.

Manufactured to attach directly to vise, #36 Mini Valve offers interchangeable inlet and exhaust ports, allowing air hose to be connected to either side of valve. Hand lever, with over-center snap action, is detented in both positions so operator does not have to hold lever in either direction. Valve works with single-acting vises, air operated cross-hole drill jigs, or any single acting air...

Read More »
Portable Shear and Rod Cutter can be vice or bench mounted.
Portable Tools

Portable Shear and Rod Cutter can be vice or bench mounted.

Weighing 17 lb, No. 1 Portable Shear has offset frame constructed to permit shearing of wide sheets, straight cuts, or outside curves. Blades are made of tool steel and can be removed for sharpening. With 1/8 in. mild steel shear capacity and 5/16 in. mild steel rod-cutting capacity, product features 24 in. handle mechanism that works in compound fashion to facilitate cutting. Special latch is...

Read More »
Low-Profile Vise offers single-handed operation.
Portable Tools

Low-Profile Vise offers single-handed operation.

Measuring 4 in. wide and 3 in. tall, Camlock Vise facilitates setup of small- to medium-sized runs. Hand knob adjusts to desired open position, and short horizontal movement of locking lever clamps or releases part. To eliminate wasted movement, max jaw travel is 5/16 in. Recessed parallel jaw inserts keep work level, and hollow base allows for clear-through drilling. Unit weighs 23 lb and...

Read More »
Self-Centering Vise delivers consistent movement.
Portable Tools

Self-Centering Vise delivers consistent movement.

Offered in jaw widths of 2, 6, and 8 in., self-centering vises handle stock sizes from Â-¼-9 in. Maximum jaw opening can be adjusted via stops, and set of hardened and ground horizontal v-jaws is offered with each size. Operated with double-acting piston type air cylinders that produce from 15-33 times power factor, vises have recommended max air pressure of 120 psi. Gear and rack assembly...

Read More »
Drill Consistent Cross-Holes in Stock up to 2-1/2"

Drill Consistent Cross-Holes in Stock up to 2-1/2"

Racine, WI - March 9, 2006 - Heinrich Company's family of Adjustable Cross-hole Drill Jigs includes three sizes in both manual and air-operated versions. They are designed for precision cross-hole drilling to round or hexagon stock and use regular SF" type drill bushings. Each unit comes with a fully adjustable end stop for locating the work. The stop can be used from either side of the fixture....

Read More »
Architectural & Civil Engineering Products

Collet Holder features air-operated design.

Using standard 5C collets, hardened and ground 1-AC Air Collet Fixture holds up to 1 1/8 in. stock or through-stock up to 1 7/64 in. Step-chuck collets and expanding collets can also be used. With max recommended air pressure of 120 psi, double-acting, piston type air cylinder develops holding power 18 x air line pressure. Featuring 2 lugs for mounting, holder can be mounted horizontally or...

Read More »

Bench Punch provides 5 tons of capacity.

Featuring 8 in. throat and 26 in. long crank handle, Deep Throat Bench Punch allows users to punch hole in center of circle with 16 in. diameter. Holes as large as Â-½ in. diameter can be punched in 1/8 in. mild steel. All wearing parts are hardened and ground. Wide selection of round and square punches and dies is available.

Read More »
Mini Valve suits single-acting vises and air mechanisms.
Fluid & Gas Flow Equipment

Mini Valve suits single-acting vises and air mechanisms.

Manufactured to attach directly to vise, #36 Mini Valve offers interchangeable inlet and exhaust ports, allowing air hose to be connected to either side of valve. Hand lever, with over-center snap action, is detented in both positions so operator does not have to hold lever in either direction. Valve works with single-acting vises, air operated cross-hole drill jigs, or any single acting air...

Read More »

All Topics