Charles Ross & Son Company
Hauppauge, NY 11788

New Dual-Shaft Mixer with High Shear Rotor/Stator
Two-wing anchor promotes bulk flow and uniform batch temperature. Features dry-running double flexilip seals on both agitator shafts. Includes a portable mixing vessel with heating/cooling jacket.
Read More »
New Mixing, Weighing and Discharging System Can be Tailored to Individual Process Needs
Consists of mixer, weighing scale and discharge system on mobile benches that can dock to each other and to transfer carts of the same height. Allows for convenient movement of the mix vessel along V-groove tracks, and easy transport of each equipment. Mixer comes with an optional weighing system for quick and precise measurements throughout the batching procedure.
Read More »
New Model VSL-400 Skid System Comes with NEMA 4 Weather-Proof Control Panel
Equipped with two axial flow impellers, 5HP inverter-duty motor drives and flange-mounted turbine mixer. Offers 34 in. diameter upper blade and 18 in. diameter lower blade to maintain batch uniformity from start to finish of the pumping sequence. Capable of mixing and pumping low to moderately viscous products with progressive cavity pump rated for 10-30 gallons/minute.
Read More »
New Pre-filter Vessel Constructed of 304L Stainless Steel
Capable of 200 psi and full vacuum at 200 degrees F. Available with working capacity of 6,500-gallons and is fully hydrotested.
Read More »
New Double Planetary Mixer Available in Reverse-lift Design
100-gallon mixers can process both wet and dry applications, including semi-solids such as gels and dough-like materials. Raises the vessel to the mixing position, rather than lowering the agitator assembly. Feature elaborate CIP system, which includes a total of five ports with rotating spray nozzles directed at the gearbox, agitators and vessel.
Read More »
20,000-Gallon Custom-Built Heated Storage Vessel
Savannah, GA – February 2020 – A supplier of specialty mixing equipment to the process industries worldwide, ROSS also manufactures ancillary storage tanks, pressure vessels and reactors up to 100,000 gallons at its Ross Engineering fabrication plant. Pictured is a recently completed vessel with a full holding capacity of 20,000 gallons, measuring 10'-6" OD x 30’ long. This horizontal...
Read More »
New Multi-Shaft Mixers Operated From 11 in. Touch Screen
Includes three-winged anchor and high speed disperser blade. Incorporates powder induction feature for efficient charging of thickeners to produce high-quality gels, creams and pastes. Available in laboratory and productions sizes upwards of 2,000 gallons.
Read More »
New Planetary Dual Disperser Mixer Come in Combination of Kneading and High Shear Input
Provided with two Rectangular Stirrers and Two Dual-Blade High Speed Dispersers. Delivers processing power for batteries, adhesives, composites, pharmaceuticals, coatings and chemicals. Available in size of 1000-gallons and with two advanced dual-post Discharge Systems.
Read More »
New ROSS VCB-0.25 Tumble Blender Comes with V-Shaped Geometry
Available in all-stainless steel construction with capacities ranging from 1/4 cu-ft to 100 cu-ft. Offered with vacuum design, heating jacket, intensifier bar for deagglomerating clumps and custom PLC controls. Suitable for processing high value and delicate applications.
Read More »
New ROSS PowerMix Equipped with The Patented High Viscosity "HV" Stirrer Blade
Stirrer blade provides axial product movement and radial exposure to a high speed disperse blade. Available across a full range of working capacities from 1 quart to 1,000 gallons. Stirrer blade and saw-tooth disperser revolve around the batch while rotating on individual axes at independent speeds.
Read More »
New Dual-Shaft Mixer with High Shear Rotor/Stator
Two-wing anchor promotes bulk flow and uniform batch temperature. Features dry-running double flexilip seals on both agitator shafts. Includes a portable mixing vessel with heating/cooling jacket.
Read More »
New Mixing, Weighing and Discharging System Can be Tailored to Individual Process Needs
Consists of mixer, weighing scale and discharge system on mobile benches that can dock to each other and to transfer carts of the same height. Allows for convenient movement of the mix vessel along V-groove tracks, and easy transport of each equipment. Mixer comes with an optional weighing system for quick and precise measurements throughout the batching procedure.
Read More »ROSS New Laboratory High Shear Mixer Video
Port St. Lucie, FL – September 2020 – ROSS launched a new video featuring the benchtop High Shear Mixer Model HSM-100LCI-T, the company's most popular laboratory mixer. Handling a wide range of dispersions, emulsions, and suspensions, the versatile HSM-100LCI-T comes with a standard 1HP motor and runs up to 10,000 RPM. Interchangeable attachments, including batch and inline rotor/stators,...
Read More »
New Model VSL-400 Skid System Comes with NEMA 4 Weather-Proof Control Panel
Equipped with two axial flow impellers, 5HP inverter-duty motor drives and flange-mounted turbine mixer. Offers 34 in. diameter upper blade and 18 in. diameter lower blade to maintain batch uniformity from start to finish of the pumping sequence. Capable of mixing and pumping low to moderately viscous products with progressive cavity pump rated for 10-30 gallons/minute.
Read More »
New Pre-filter Vessel Constructed of 304L Stainless Steel
Capable of 200 psi and full vacuum at 200 degrees F. Available with working capacity of 6,500-gallons and is fully hydrotested.
Read More »
New Double Planetary Mixer Available in Reverse-lift Design
100-gallon mixers can process both wet and dry applications, including semi-solids such as gels and dough-like materials. Raises the vessel to the mixing position, rather than lowering the agitator assembly. Feature elaborate CIP system, which includes a total of five ports with rotating spray nozzles directed at the gearbox, agitators and vessel.
Read More »A Statement to Our Customers & Associates
With the outbreak and impact of Coronavirus (COVID-19) taking a toll on people and countries worldwide, we would like to assure you that all ROSS U.S. companies remain fully operational and are prepared to support your company's process equipment needs. We are proud to support "critical infrastructure" and "essential business" industries such as food, pharmaceutical, health, chemical and the...
Read More »
20,000-Gallon Custom-Built Heated Storage Vessel
Savannah, GA – February 2020 – A supplier of specialty mixing equipment to the process industries worldwide, ROSS also manufactures ancillary storage tanks, pressure vessels and reactors up to 100,000 gallons at its Ross Engineering fabrication plant. Pictured is a recently completed vessel with a full holding capacity of 20,000 gallons, measuring 10'-6" OD x 30’ long. This horizontal...
Read More »Ken Langhorn is Newly-Appointed ROSS Vice President of Sales
HAUPPAUGE, NEW YORK – November 15, 2019 ROSS is pleased to announce the appointment of Ken Langhorn to the position of Vice President of Sales. Ken graduated with a Bachelor of Science degree from SUNY Stony Brook and joined ROSS in February 1998 as a Lab Assistant in the company's Test & Development Center. Ken had more to offer and began working on various projects to improve the ROSS...
Read More »
New Multi-Shaft Mixers Operated From 11 in. Touch Screen
Includes three-winged anchor and high speed disperser blade. Incorporates powder induction feature for efficient charging of thickeners to produce high-quality gels, creams and pastes. Available in laboratory and productions sizes upwards of 2,000 gallons.
Read More »