BriskHeat Corporation
Columbus, OH 43232
New EZ09 Hot Bonder for Smart Patch Repair Bonding in Field
Features a large touch-screen display panel and sophisticated software. Designed for the repair of high-performance aircraft structures. Composite repair kit contains the necessary tools for composite repair on an advanced carbon structure.
Read More »
New Evaporative Pans for Low Flashpoint Refrigerants
Constructed to provide a solution to evaporate defrost and condensate water where no drain line is available. Provides an option for users who need a solution for continuous evaporation that automatically regulates the wattage based on water level and temperature. Ideal for commercial refrigeration, industrial units, elevators and HVAC units.
Read More »
New Wet-Area Cloth Heating Jackets are Lightweight for Easy Installation
Feature water-resistant design and built-in insulation that are suitable for use in outdoor, indoor, or in washdown locations. Comes with a standard 360° grounded heating element and high-limit thermostat to maximize safety. Include power cords, plugs and are ideal for drums, IBC/totes, and tanks.
Read More »
New LYNX Temperature Control System from BriskHeat Comes with Menu-Driven Interface
Features 3-button programming and visible status indicator light that can communicate to other systems using modbus. Offers full-color touchscreen interface, remote monitoring, and email alerts. Operator interface controls up to eight lines of connected temperature control modules with up to 128 modules per line, up to 1,024 heaters.
Read More »
New SDX Digital PID Temperature Controller Shows Set-Point and Actual Temperature
Voltage ranges from 100 to 240 VAC with 15-amp relay. Provides accurate PID control across wide temperature range to regulate cloth and silicone heating blankets, tapes and cables, jackets and heating mantles. Ideal for laboratory, agriculture, petrochemical, general manufacturing, semiconductor, composite, chemical, food and beverage and plastics.
Read More »
New Aluminum Foil Heaters for Flexible Heating, Insulating and Temperature Controlling
Features electric resistance and attached to a surface using built-in adhesive. Mechanically fastened using rivets and sheet metal screws. Easy-to-install solution with high value-added potential in wide variety of applications.
Read More »
New Heating Mantles Feature Durable and Sturdy Table-top Design
Metal-housed mantles are equipped with magnetic stirrers, designed to uniformly heat round-bottom flasks while stirring the contents. Provides an easy-to-use all-in-one unit with safety, performance and reliability. Applicable for manufacturing, education, chemistry, biology and research industries.
Read More »
BriskHeat Offers New Temperature Controllers with Fast-Adaptive-Tuning Technology
Available in SDX, HL101 Series and BH-330 In-Line and BH-510 models. The SDX controller is approved to cULus and CE standards and suitable for laboratory or indoor applications. BH-330 comes with IR remote control and designed for wet and outdoor areas.
Read More »
New ATEX Heaters Features Temperature Controlling Range up to 450 Degree Celsius
Designed to protect contents of bulk containers such as drums, IBC tanks and gas bottles from damage due to cold temperatures. Features operating temperature control, high-limit temperature limiter, power limiting control and 25-amp capacity. Containers include 200-220 litre/55-gallon drums, 1000 litre/250-gallon IBC tanks, and 10, 50, and 79-litre gas bottles.
Read More »
New Starters Available for All Standard Size Compressors up to 32A and Voltages up to 230VAC
Protects A/C compressors from failures including stalling, overheating, motor reversal and arcing damage. Designed for use with HVAC units and heat pumps. Available for all standard size compressors up to 32A and voltages up to 230VAC.
Read More »
New EZ09 Hot Bonder for Smart Patch Repair Bonding in Field
Features a large touch-screen display panel and sophisticated software. Designed for the repair of high-performance aircraft structures. Composite repair kit contains the necessary tools for composite repair on an advanced carbon structure.
Read More »
New Evaporative Pans for Low Flashpoint Refrigerants
Constructed to provide a solution to evaporate defrost and condensate water where no drain line is available. Provides an option for users who need a solution for continuous evaporation that automatically regulates the wattage based on water level and temperature. Ideal for commercial refrigeration, industrial units, elevators and HVAC units.
Read More »
New Wet-Area Cloth Heating Jackets are Lightweight for Easy Installation
Feature water-resistant design and built-in insulation that are suitable for use in outdoor, indoor, or in washdown locations. Comes with a standard 360° grounded heating element and high-limit thermostat to maximize safety. Include power cords, plugs and are ideal for drums, IBC/totes, and tanks.
Read More »
New LYNX Temperature Control System from BriskHeat Comes with Menu-Driven Interface
Features 3-button programming and visible status indicator light that can communicate to other systems using modbus. Offers full-color touchscreen interface, remote monitoring, and email alerts. Operator interface controls up to eight lines of connected temperature control modules with up to 128 modules per line, up to 1,024 heaters.
Read More »
New SDX Digital PID Temperature Controller Shows Set-Point and Actual Temperature
Voltage ranges from 100 to 240 VAC with 15-amp relay. Provides accurate PID control across wide temperature range to regulate cloth and silicone heating blankets, tapes and cables, jackets and heating mantles. Ideal for laboratory, agriculture, petrochemical, general manufacturing, semiconductor, composite, chemical, food and beverage and plastics.
Read More »
New Aluminum Foil Heaters for Flexible Heating, Insulating and Temperature Controlling
Features electric resistance and attached to a surface using built-in adhesive. Mechanically fastened using rivets and sheet metal screws. Easy-to-install solution with high value-added potential in wide variety of applications.
Read More »
New Heating Mantles Feature Durable and Sturdy Table-top Design
Metal-housed mantles are equipped with magnetic stirrers, designed to uniformly heat round-bottom flasks while stirring the contents. Provides an easy-to-use all-in-one unit with safety, performance and reliability. Applicable for manufacturing, education, chemistry, biology and research industries.
Read More »
BriskHeat Offers New Temperature Controllers with Fast-Adaptive-Tuning Technology
Available in SDX, HL101 Series and BH-330 In-Line and BH-510 models. The SDX controller is approved to cULus and CE standards and suitable for laboratory or indoor applications. BH-330 comes with IR remote control and designed for wet and outdoor areas.
Read More »
New ATEX Heaters Features Temperature Controlling Range up to 450 Degree Celsius
Designed to protect contents of bulk containers such as drums, IBC tanks and gas bottles from damage due to cold temperatures. Features operating temperature control, high-limit temperature limiter, power limiting control and 25-amp capacity. Containers include 200-220 litre/55-gallon drums, 1000 litre/250-gallon IBC tanks, and 10, 50, and 79-litre gas bottles.
Read More »
New Starters Available for All Standard Size Compressors up to 32A and Voltages up to 230VAC
Protects A/C compressors from failures including stalling, overheating, motor reversal and arcing damage. Designed for use with HVAC units and heat pumps. Available for all standard size compressors up to 32A and voltages up to 230VAC.
Read More »
