Adcole
Marlborough, MA 01752
Latest Metrology Gages from Adcole are Equipped with Accurate Headstock Spindle
Adcole’s Model 911 and Model 1200LX Metrology Gages are now fitted with LightSCOPE™ and LightSCAN™ optical measurement systems for high speed scanning of complex camshaft and crankshaft parts. The units can be programmable for automated measurement sequences and come with an intuitive interface touchscreen monitor. The gages offer 3,600 data points per revolution. The Model 911 is suitable...
Read More »
1000-Zygo Inspection Gage comes with anti-vibration technology.
Using white-light interferometry and diamond-tipped probe, 1000-Zygo Surface Finish Inspection Gage is used to measure roughness and waviness. Providing precise inspection of crankshaft and camshaft surface geometries, unit is designed with user-friendly software for speed and eased surface inspection. 1000-Zygo is constructed with granite and steel.
Read More »
Crankshaft Gages include programming interface.
Supplied with Adcole Model 1100 and 1200 Crankshaft Gages, PIR Part Inspection and Reporting software features single interface that facilitates part programming, sequence building, and reporting. Users can program new part to measure in less than 15 minutes including crankshaft specification and inspection sequence. Fully integrated utility will then create summary report, output plot, and SPC...
Read More »
High-Speed Inline Camshaft Gauge offers submicron accuracy.
Gantry or robot fed for 100% end-of-line inspection, Model 1310S measures up to 28 features, including lobes, journals, chatter, and timing references, with sub-micron accuracy and repeatability. Fully automated- unit, with
Read More »
End-of-Line Camshaft Inspection Machine can measure 200 parts/hr.
Adcole 1310 High-Speed Camshaft Gage provides robot-fed 100% camshaft inspection by measuring 10 or more parameters with 0.1 micron resolution per data point or 3,600 data points per revolution. Along with Windows-® 7-based software, features include utility upgrades with chatter analysis options, parameter warnings for programmable reports, and qs-Stat quality options. Automatic programmable...
Read More »
Camshaft Measuring Machine features Siemens motion control.
Designed for use on factory floor, Model 1000 Surface Finish Gauge enables users to press one button and have all surface measurements such as Ra, Rp, Tp, and Rsk performed in one sequence on main and rod journals and thrust faces. System is built on rugged platform of structural steel and granite, and uses 3 stylus tips which are capable of scanning 2,000 points/nm. Users can perform gauge...
Read More »Automotive Industries Magazine Cover Story Features Gaging 100% of Camshafts By Adcole
Marlborough, MA — Adcole Corporation announced that Automotive Industries Magazine featured the company's Adcole Model 1310 Camshaft Gage on the cover of the June 2013 issue.- The gage measures 100% of camshafts live on the production line with sub-micron accuracy. Increasingly stringent regulations governing emissions combined with the need to save costs by reducing waste and rework have...
Read More »Camshaft Gauge features narrow follower head design.
Designed for 100% robot-fed camshaft inspection, ADCOLE 1310 High-Speed Camshaft Gauge features 19 mm wide measuring heads capable of measuring 6 cam lobes per cylinder with up to 32 measuring heads. Unit has programmable headstock with 100 mm travel, programmable tailstock, and achieves 0.1 micron resolution per data point, or 3,600 data points per revolution. Gauge measures radius, profile,...
Read More »
Camshaft Inspection Gauge processes 200 parts per hour.
Featuring automatic programmable headstock with 100 mm travel, ADCOLE 1310 High-Speed Camshaft Gauge measures- radius, profile, taper, crown, timing angle, diameter, velocity, acceleration, run-out, roundness, and concentricity. Unit provides 0.1 micron resolution per data point, or 3,600 data points per revolution. Capable of handling changeovers automatically, machine includes dual computers,...
Read More »
Diesel Cam Tester handles parts up to 105 in. long.
Capable of automatically measuring 360-
Read More »
Latest Metrology Gages from Adcole are Equipped with Accurate Headstock Spindle
Adcole’s Model 911 and Model 1200LX Metrology Gages are now fitted with LightSCOPE™ and LightSCAN™ optical measurement systems for high speed scanning of complex camshaft and crankshaft parts. The units can be programmable for automated measurement sequences and come with an intuitive interface touchscreen monitor. The gages offer 3,600 data points per revolution. The Model 911 is suitable...
Read More »
1000-Zygo Inspection Gage comes with anti-vibration technology.
Using white-light interferometry and diamond-tipped probe, 1000-Zygo Surface Finish Inspection Gage is used to measure roughness and waviness. Providing precise inspection of crankshaft and camshaft surface geometries, unit is designed with user-friendly software for speed and eased surface inspection. 1000-Zygo is constructed with granite and steel.
Read More »
Crankshaft Gages include programming interface.
Supplied with Adcole Model 1100 and 1200 Crankshaft Gages, PIR Part Inspection and Reporting software features single interface that facilitates part programming, sequence building, and reporting. Users can program new part to measure in less than 15 minutes including crankshaft specification and inspection sequence. Fully integrated utility will then create summary report, output plot, and SPC...
Read More »
High-Speed Inline Camshaft Gauge offers submicron accuracy.
Gantry or robot fed for 100% end-of-line inspection, Model 1310S measures up to 28 features, including lobes, journals, chatter, and timing references, with sub-micron accuracy and repeatability. Fully automated- unit, with
Read More »
End-of-Line Camshaft Inspection Machine can measure 200 parts/hr.
Adcole 1310 High-Speed Camshaft Gage provides robot-fed 100% camshaft inspection by measuring 10 or more parameters with 0.1 micron resolution per data point or 3,600 data points per revolution. Along with Windows-® 7-based software, features include utility upgrades with chatter analysis options, parameter warnings for programmable reports, and qs-Stat quality options. Automatic programmable...
Read More »Adcole Corporation Appoints J. Brooks Reece President and CEO
Marlborough, MA (USA) – Adcole Corporation, a leading manufacturer of special purpose machines for measuring engine components such as camshafts, crankshafts, and pistons, as well as sun angle sensors for space satellites has appointed Brook Reece President & CEO. Adcole was founded in 1957 by Addison D. Cole who was President & CEO for 57 years, retired at Age 95, and sold the business to...
Read More »Adcole Corporation Acquired by Artemis Capital Partners
Newest Artemis Portfolio Company is Leading Manufacturer of Precision Gauges Sensors for Automotive, Industrial, & Aerospace Markets Marlborough, MA- – Adcole Corporation (Adcole) has announced its acquisition by Artemis Capital Partners (Artemis), a Boston-based private equity firm focused on acquiring and growing differentiated industrial technology companies. Founded in 1957 and...
Read More »
Camshaft Measuring Machine features Siemens motion control.
Designed for use on factory floor, Model 1000 Surface Finish Gauge enables users to press one button and have all surface measurements such as Ra, Rp, Tp, and Rsk performed in one sequence on main and rod journals and thrust faces. System is built on rugged platform of structural steel and granite, and uses 3 stylus tips which are capable of scanning 2,000 points/nm. Users can perform gauge...
Read More »Automotive Industries Magazine Cover Story Features Gaging 100% of Camshafts By Adcole
Marlborough, MA — Adcole Corporation announced that Automotive Industries Magazine featured the company's Adcole Model 1310 Camshaft Gage on the cover of the June 2013 issue.- The gage measures 100% of camshafts live on the production line with sub-micron accuracy. Increasingly stringent regulations governing emissions combined with the need to save costs by reducing waste and rework have...
Read More »Camshaft Gauge features narrow follower head design.
Designed for 100% robot-fed camshaft inspection, ADCOLE 1310 High-Speed Camshaft Gauge features 19 mm wide measuring heads capable of measuring 6 cam lobes per cylinder with up to 32 measuring heads. Unit has programmable headstock with 100 mm travel, programmable tailstock, and achieves 0.1 micron resolution per data point, or 3,600 data points per revolution. Gauge measures radius, profile,...
Read More »