ERICO International Corporation.
Solon, OH 44139
Share:
Rebar Splice requires no bar-end threading.
Suited for new construction, repair, or retrofit applications, in-situ LENTON-® LOCK coupler features gripping technology that provides for development of full rebar strength and structural integrity in tension, compression, stress-reversal, and dynamic applications. Coupler can be installed with standard wrench or impact wrench, depending on coupler size. Bolt heads shear off when proper...
Read More »
Rebar Splice requires no bar-end threading.
Suited for new construction, repair, or retrofit applications, in-situ LENTONÃ-® LOCK coupler features gripping technology that provides for development of full rebar strength and structural integrity in tension, compression, stress-reversal, and dynamic applications. Coupler can be installed with standard wrench or impact wrench, depending on coupler size. Bolt heads shear off when proper...
Read More »
Ground Resistance Tester meets IEC 1010 standards.
Measuring ground rod and small grid resistance in any season, handheld ERITECH-® EST401 clamp-on tester can be used in multi-grounded systems without disconnecting ground under test. Probe enables measurement of current leakage flowing to ground or circulating in ground loops to 1 mA and neutral currents to 30 A(rms). With rugged Lexan® body, product is suited for taking measurements at...
Read More »
Ground Resistance Tester meets IEC 1010 standards.
Measuring ground rod and small grid resistance in any season, handheld ERITECHÃ-® EST401 clamp-on tester can be used in multi-grounded systems without disconnecting ground under test. Probe enables measurement of current leakage flowing to ground or circulating in ground loops to 1 mA and neutral currents to 30 A(rms). With rugged Lexanî body, product is suited for taking measurements...
Read More »
Electrical Box Supports work with stud depths up to 4 in.
H23 Box Mounting Brackets attach 4 and 4 11/16 in. outlet boxes to wood or metal studs, accommodate 2-½ and 3½ in. stud depths, and comply with NEC® Article 300.4(d) and CEC® Rule 12-3012. Extending stud depths to 4 in., CADDY MEB1 brackets mount on either side of stud without need to reposition box, and include V-notch on center for consistent positioning. Both electrical box supports...
Read More »
Electrical Box Supports work with stud depths up to 4 in.
H23 Box Mounting Brackets attach 4 and 4 11/16 in. outlet boxes to wood or metal studs, accommodate 2Ã-½ and 3ý in. stud depths, and comply with NECî Article 300.4(d) and CECî Rule 12-3012. Extending stud depths to 4 in., CADDY MEB1 brackets mount on either side of stud without need to reposition box, and include V-notch on center for consistent positioning. Both...
Read More »
Conduit Supports securely attach conduit and cable to studs.
Screw-On Conduit Supports attach -½-1 in. EMT conduit or MC/AC cable to wood and metal studs. They comply with NEC® 358.30(A) and CEC© rule 12-1404, which requires conduit support within 36 in. of electrical box. Units are gangable and work with both 1½ and 2 1/8 in. deep boxes. Alignment tab positively locates fastener on stud, and serves to keep conduit in line with box knockout and...
Read More »
Conduit Supports securely attach conduit and cable to studs.
Screw-On Conduit Supports attach Ã-½-1 in. EMT conduit or MC/AC cable to wood and metal studs. They comply with NECî 358.30(A) and CECé rule 12-1404, which requires conduit support within 36 in. of electrical box. Units are gangable and work with both 1ý and 2 1/8 in. deep boxes. Alignment tab positively locates fastener on stud, and serves to keep conduit in line with...
Read More »
Distribution Blocks are IP 20 UL® finger safe.
Available with hinged/removable screw-retaining transparent covers that allow visual inspection of wire and confirmation of connection, single-pole ERIFLEX-® distribution blocks have more than 95% fill ratio. Tinned copper blocks clip onto DIN Rail or mount to panels with screws. By keeping only one input, blocks can be supplied in parallel using jumper wire. They can be ganged for unlimited...
Read More »
Distribution Blocks are IP 20 UL-® finger safe.
Available with hinged/removable screw-retaining transparent covers that allow visual inspection of wire and confirmation of connection, single-pole ERIFLEXÃ-® distribution blocks have more than 95% fill ratio. Tinned copper blocks clip onto DIN Rail or mount to panels with screws. By keeping only one input, blocks can be supplied in parallel using jumper wire. They can be ganged for unlimited...
Read More »