ERICO International Corporation.

Four Pole Distribution Blocks feature solid bars.
Architectural & Civil Engineering Products

Four Pole Distribution Blocks feature solid bars.

With working voltage of 1,000 Vac to 1,500 Vdc per IEC and 600 V per UL, ERIFLEX® TDL 250/400 A Distribution Blocks feature tinned copper bar, reinforced plastic parts, and large end terminals that ensure secure connections. Units withstand short circuits up to 51 KA. Rated IP10, hand-safe blocks enable wiring from both sides as well as visual inspection of wire and confirmation of connection.

Read More »
Four Pole Distribution Blocks feature solid bars.
Architectural & Civil Engineering Products

Four Pole Distribution Blocks feature solid bars.

With working voltage of 1,000 Vac to 1,500 Vdc per IEC and 600 V per UL, ERIFLEX® TDL 250/400 A Distribution Blocks feature tinned copper bar, reinforced plastic parts, and large end terminals that ensure secure connections. Units withstand short circuits up to 51 KA. Rated IP10, hand-safe blocks enable wiring from both sides as well as visual inspection of wire and confirmation of connection.

Read More »
Gangable Distribution Blocks can build 1- to 4-pole designs.
Architectural & Civil Engineering Products

Gangable Distribution Blocks can build 1- to 4-pole designs.

Single-pole distribution block models UDF 250A and 500A have modular design with screw retaining, transparent blue cover that allows visual wire inspection and connection confirmation. Able to clip onto DIN Rail or mount to panel with screws, IP20 finger safe blocks are halogen free, RoHS compliant, and offer short circuit withstanding ratings of 30 KA (UDF 250A) and 51 KA (UDF 500A). Working...

Read More »
Gangable Distribution Blocks can build 1- to 4-pole designs.
Architectural & Civil Engineering Products

Gangable Distribution Blocks can build 1- to 4-pole designs.

Single-pole distribution block models UDF 250A and 500A have modular design with screw retaining, transparent blue cover that allows visual wire inspection and connection confirmation. Able to clip onto DIN Rail or mount to panel with screws, IP20 finger safe blocks are halogen free, RoHS compliant, and offer short circuit withstanding ratings of 30 KA (UDF 250A) and 51 KA (UDF 500A). Working...

Read More »
The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod
Fasteners & Hardware

The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod

SOLON, Ohio, USA - The SN Series Nut, part of the CADDY® line of fixings, fasteners and supports from ERICO, is an innovative new solution for supporting loads on threaded rod. The SN Series Nut is extremely easy to install and can be positioned instantly on threaded rod at any location, helping to significantly reduce installation time. Simply open the nut and insert it on the threaded rod...

Read More »
The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod
Fasteners & Hardware

The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod

SOLON, Ohio, USA - The SN Series Nut, part of the CADDY® line of fixings, fasteners and supports from ERICO, is an innovative new solution for supporting loads on threaded rod. The SN Series Nut is extremely easy to install and can be positioned instantly on threaded rod at any location, helping to significantly reduce installation time. Simply open the nut and insert it on the threaded rod...

Read More »
Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems
Electrical Equipment & Systems

Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems

FOR IMMEDIATE RELEASE - SOLON, Ohio, USA, - The ERITECH® brand of solar bonding lugs from ERICO are designed to bond the frames and mounting structures of solar photovoltaic systems in accordance with NEC® requirements. These lugs are corrosion resistant and galvanically compatible with copper grounding conductors and aluminum photovoltaic module frames. The solar bonding lugs are supplied with...

Read More »
Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems
Electrical Equipment & Systems

Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems

FOR IMMEDIATE RELEASE - SOLON, Ohio, USA, - The ERITECH® brand of solar bonding lugs from ERICO are designed to bond the frames and mounting structures of solar photovoltaic systems in accordance with NEC® requirements. These lugs are corrosion resistant and galvanically compatible with copper grounding conductors and aluminum photovoltaic module frames. The solar bonding lugs are supplied with...

Read More »
Far Side Supports provide stability in electrical box installations.
Architectural & Civil Engineering Products

Far Side Supports provide stability in electrical box installations.

Halogen free SBLT and SBTT range power terminals provide connection between 2 electrical circuits, such as cables and/or ERIFLEX® FLEXIBAR in panel. SBLT power terminals are offered with 350-1,250 A IEC® and 300-760 A UL® ratings and connect to ERIFLEX® FLEXIBAR plain or tinned copper and copper or aluminum cables. RoHS compliant products are short circuit current rated up to 100 kA, offer CE...

Read More »
Far Side Supports provide stability in electrical box installations.
Architectural & Civil Engineering Products

Far Side Supports provide stability in electrical box installations.

Halogen free SBLT and SBTT range power terminals provide connection between 2 electrical circuits, such as cables and/or ERIFLEX® FLEXIBAR in panel. SBLT power terminals are offered with 350-1,250 A IEC® and 300-760 A UL® ratings and connect to ERIFLEX® FLEXIBAR plain or tinned copper and copper or aluminum cables. RoHS compliant products are short circuit current rated up to 100 kA, offer CE...

Read More »
Four Pole Distribution Blocks feature solid bars.
Architectural & Civil Engineering Products

Four Pole Distribution Blocks feature solid bars.

With working voltage of 1,000 Vac to 1,500 Vdc per IEC and 600 V per UL, ERIFLEX® TDL 250/400 A Distribution Blocks feature tinned copper bar, reinforced plastic parts, and large end terminals that ensure secure connections. Units withstand short circuits up to 51 KA. Rated IP10, hand-safe blocks enable wiring from both sides as well as visual inspection of wire and confirmation of connection.

Read More »
Four Pole Distribution Blocks feature solid bars.
Architectural & Civil Engineering Products

Four Pole Distribution Blocks feature solid bars.

With working voltage of 1,000 Vac to 1,500 Vdc per IEC and 600 V per UL, ERIFLEX® TDL 250/400 A Distribution Blocks feature tinned copper bar, reinforced plastic parts, and large end terminals that ensure secure connections. Units withstand short circuits up to 51 KA. Rated IP10, hand-safe blocks enable wiring from both sides as well as visual inspection of wire and confirmation of connection.

Read More »
Gangable Distribution Blocks can build 1- to 4-pole designs.
Architectural & Civil Engineering Products

Gangable Distribution Blocks can build 1- to 4-pole designs.

Single-pole distribution block models UDF 250A and 500A have modular design with screw retaining, transparent blue cover that allows visual wire inspection and connection confirmation. Able to clip onto DIN Rail or mount to panel with screws, IP20 finger safe blocks are halogen free, RoHS compliant, and offer short circuit withstanding ratings of 30 KA (UDF 250A) and 51 KA (UDF 500A). Working...

Read More »
Gangable Distribution Blocks can build 1- to 4-pole designs.
Architectural & Civil Engineering Products

Gangable Distribution Blocks can build 1- to 4-pole designs.

Single-pole distribution block models UDF 250A and 500A have modular design with screw retaining, transparent blue cover that allows visual wire inspection and connection confirmation. Able to clip onto DIN Rail or mount to panel with screws, IP20 finger safe blocks are halogen free, RoHS compliant, and offer short circuit withstanding ratings of 30 KA (UDF 250A) and 51 KA (UDF 500A). Working...

Read More »
The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod
Fasteners & Hardware

The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod

SOLON, Ohio, USA - The SN Series Nut, part of the CADDY® line of fixings, fasteners and supports from ERICO, is an innovative new solution for supporting loads on threaded rod. The SN Series Nut is extremely easy to install and can be positioned instantly on threaded rod at any location, helping to significantly reduce installation time. Simply open the nut and insert it on the threaded rod...

Read More »
The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod
Fasteners & Hardware

The SN Series Nut from ERICO: An Easy-to-Use Solution for Supporting Loads on Threaded Rod

SOLON, Ohio, USA - The SN Series Nut, part of the CADDY® line of fixings, fasteners and supports from ERICO, is an innovative new solution for supporting loads on threaded rod. The SN Series Nut is extremely easy to install and can be positioned instantly on threaded rod at any location, helping to significantly reduce installation time. Simply open the nut and insert it on the threaded rod...

Read More »
Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems
Electrical Equipment & Systems

Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems

FOR IMMEDIATE RELEASE - SOLON, Ohio, USA, - The ERITECH® brand of solar bonding lugs from ERICO are designed to bond the frames and mounting structures of solar photovoltaic systems in accordance with NEC® requirements. These lugs are corrosion resistant and galvanically compatible with copper grounding conductors and aluminum photovoltaic module frames. The solar bonding lugs are supplied with...

Read More »
Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems
Electrical Equipment & Systems

Solar Bonding Lugs from Erico Bond the Frames and Mounting Structures of Solar Photovoltaic Systems

FOR IMMEDIATE RELEASE - SOLON, Ohio, USA, - The ERITECH® brand of solar bonding lugs from ERICO are designed to bond the frames and mounting structures of solar photovoltaic systems in accordance with NEC® requirements. These lugs are corrosion resistant and galvanically compatible with copper grounding conductors and aluminum photovoltaic module frames. The solar bonding lugs are supplied with...

Read More »
Far Side Supports provide stability in electrical box installations.
Architectural & Civil Engineering Products

Far Side Supports provide stability in electrical box installations.

Halogen free SBLT and SBTT range power terminals provide connection between 2 electrical circuits, such as cables and/or ERIFLEX® FLEXIBAR in panel. SBLT power terminals are offered with 350-1,250 A IEC® and 300-760 A UL® ratings and connect to ERIFLEX® FLEXIBAR plain or tinned copper and copper or aluminum cables. RoHS compliant products are short circuit current rated up to 100 kA, offer CE...

Read More »
Far Side Supports provide stability in electrical box installations.
Architectural & Civil Engineering Products

Far Side Supports provide stability in electrical box installations.

Halogen free SBLT and SBTT range power terminals provide connection between 2 electrical circuits, such as cables and/or ERIFLEX® FLEXIBAR in panel. SBLT power terminals are offered with 350-1,250 A IEC® and 300-760 A UL® ratings and connect to ERIFLEX® FLEXIBAR plain or tinned copper and copper or aluminum cables. RoHS compliant products are short circuit current rated up to 100 kA, offer CE...

Read More »

All Topics