Carpenter Technology Corporation - Powder Products

Stainless Steel Bar targets CNC Swiss-style screw machines.
Food Processing & Preparation

Stainless Steel Bar targets CNC Swiss-style screw machines.

Precision drawn to ASTM half standard or ISO H9 tolerances, PROJECT 70®+ PDB Bar features chamfered ends, optimized straightness, and tight OD tolerances for consistent size along entire length and minimal out-of-round conditions. Round bar forms come in 7 nominal diameters from 0.2500–0.6250 in. with 144 in. standard lengths, as well as 4 grades, furnished in condition A, including: Type...

Read More »
Materials

Magnetic Stainless Steel is designed for fastener industry.

Available in wire from .060-1 in. coil, martensitic, magnetic Trinamet(TM) stainless combines corrosion resistance, heat-treated hardness, and cold formability. With corrosion resistance in industrial environments comparable to Type 304 and 17-4 SS, it achieves hardness of 53 HRC in fully heat-treated condition. Product has room temperature tensile strength of 90-110 ksi and it work hardens at...

Read More »
Materials

Soft Magnetic Alloy Strips increase power in generators.

Hiperco® 50 and Hiperco® 50-HS, available in widths to 12Â-½ in. and thickness to 0.020 in., enable engineers to configure larger components in integral units and reduce need for segmented laminations. Both models are iron-cobalt-vanadium soft magnetic materials and exhibit magnetic saturation of 24 kilogauss. When annealed at 1,328° to 1,354°F for 2 hr, original...

Read More »
Bar Stock is made of nickel-free stainless steel alloy.
Health, Medical, & Dental Supplies and Equipment

Bar Stock is made of nickel-free stainless steel alloy.

Austenitic BioDur® 108 alloy is offered in cannulated bar stock with hole from end to end, in ODs of 0.118-0.750 in. and IDs of 0.055-0.354 in. Suited for implantable orthopedic applications, product minimizes problems associated with nickel toxicity and can be considered for bone screws, intramedullary nails for femurs, and trauma devices. Alloy, with typical yield strength of 230 ksi and...

Read More »

Alloy Strips suit corrosive applications.

High-temperature alloys in strip form are used in making parts and components that require heat resistance in environments up to 2000°F. Strips range from 0.003-0.24 in. thick in widths from 3/8-13 1/2 in., depending on alloy. They are offered in tempered or annealed condition. Applications include aerospace fasteners, turbine blades, jet engine components, heat shields, mechanical seals,...

Read More »
Machining Bar suits demanding applications.
Food Processing & Preparation

Machining Bar suits demanding applications.

Project 70+® premium stainless steel machining alloys are offered in 6 grades and provide more lot-to-lot consistency, faster machining speeds, better part output and less tool wear than comparable products. Grades include Type 303, Type 304/304L, Type 316/316L, Type 416, Custom 630, and 15Cr-5Ni. Bar is offered in sizes ranging from .125 to 3.25 in. in standard increments.

Read More »
Stainless Steel Bar targets CNC Swiss-style screw machines.
Food Processing & Preparation

Stainless Steel Bar targets CNC Swiss-style screw machines.

Precision drawn to ASTM half standard or ISO H9 tolerances, PROJECT 70®+ PDB Bar features chamfered ends, optimized straightness, and tight OD tolerances for consistent size along entire length and minimal out-of-round conditions. Round bar forms come in 7 nominal diameters from 0.2500–0.6250 in. with 144 in. standard lengths, as well as 4 grades, furnished in condition A, including: Type...

Read More »
Company News

Carpenter Announces Exclusive Venture with SB Specialty Metals

Companies to Collaborate to Service the Domestic Knife Blade Market WYOMISSING, Pa. - July 28, 2010 - Carpenter Technology Corporation (NYSE: CRS), a leader in the development and manufacture of high-performance specialty alloys, today announced an exclusive deal with SB Specialty Metals LLC. Together, the two companies will bring sport and military knife blade materials to a much broader market...

Read More »
Mergers & Acquisitions

Carpenter Expands Powder Capabilities with Acquisition of UltraFine Powder Technology, Inc.

BRIDGEVILLE, PA (April 4, 2008) -- Carpenter Technology Corporation recently announced its Carpenter Powder Products subsidiary has acquired UltraFine Powder Technology, Inc., a private company. UltraFine Powder, which operates a single facility in Woonsocket, R.I., is a leader in the manufacture and sale of fine gas atomized powders for the metal injection molding (MIM) industry and other...

Read More »
People in the News

Anne Stevens Appointed Chairman, President and Chief Executive Officer of Carpenter Technology

WYOMISSING, Pa.--(BUSINESS WIRE)--Oct. 18, 2006--Carpenter Technology Corporation (NYSE:CRS) announced today the appointment of Anne Stevens as Chairman, President and Chief Executive Officer, effective November 1, 2006. Ms. Stevens will succeed Robert J. Torcolini, who previously announced his retirement from the Company. He will be a special advisor to Ms. Stevens and the Board until January 1,...

Read More »
Materials

Magnetic Stainless Steel is designed for fastener industry.

Available in wire from .060-1 in. coil, martensitic, magnetic Trinamet(TM) stainless combines corrosion resistance, heat-treated hardness, and cold formability. With corrosion resistance in industrial environments comparable to Type 304 and 17-4 SS, it achieves hardness of 53 HRC in fully heat-treated condition. Product has room temperature tensile strength of 90-110 ksi and it work hardens at...

Read More »
Materials

Soft Magnetic Alloy Strips increase power in generators.

Hiperco® 50 and Hiperco® 50-HS, available in widths to 12Â-½ in. and thickness to 0.020 in., enable engineers to configure larger components in integral units and reduce need for segmented laminations. Both models are iron-cobalt-vanadium soft magnetic materials and exhibit magnetic saturation of 24 kilogauss. When annealed at 1,328° to 1,354°F for 2 hr, original...

Read More »
Bar Stock is made of nickel-free stainless steel alloy.
Health, Medical, & Dental Supplies and Equipment

Bar Stock is made of nickel-free stainless steel alloy.

Austenitic BioDur® 108 alloy is offered in cannulated bar stock with hole from end to end, in ODs of 0.118-0.750 in. and IDs of 0.055-0.354 in. Suited for implantable orthopedic applications, product minimizes problems associated with nickel toxicity and can be considered for bone screws, intramedullary nails for femurs, and trauma devices. Alloy, with typical yield strength of 230 ksi and...

Read More »

Alloy Strips suit corrosive applications.

High-temperature alloys in strip form are used in making parts and components that require heat resistance in environments up to 2000°F. Strips range from 0.003-0.24 in. thick in widths from 3/8-13 1/2 in., depending on alloy. They are offered in tempered or annealed condition. Applications include aerospace fasteners, turbine blades, jet engine components, heat shields, mechanical seals,...

Read More »
Machining Bar suits demanding applications.
Food Processing & Preparation

Machining Bar suits demanding applications.

Project 70+® premium stainless steel machining alloys are offered in 6 grades and provide more lot-to-lot consistency, faster machining speeds, better part output and less tool wear than comparable products. Grades include Type 303, Type 304/304L, Type 316/316L, Type 416, Custom 630, and 15Cr-5Ni. Bar is offered in sizes ranging from .125 to 3.25 in. in standard increments.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers