American Eltec Inc
Las Vegas, NV 89107
PCIe Frame Grabber optimizes Camera Link device use.
PC_EYE/CL has inputs for digital video data compliant with Camera Link v1.2. Each of 2 Mini-Delta-Ribbon 26-pin connectors supports 4 ports, for total of 8 ports that can be used to connect 2 independent Base cameras, one Medium configuration camera, or one Full camera. Each 8-bit port uses 7:1 multiplexing scheme with serial transmission rate of 2.36 Gbps for optimal utilization of cable...
Read More »
Central Processing Unit consumes only 31 W.
Utilizing IntelÃ-® E7520 chipset, EUROCOMÃ-® 400 CPU features 2.0 GHz LV Dual-Core IntelÃ-® XeonÃ-® processor with dual CPU capabilities in combination with COM Express platform. Module architecture enables fast, simultaneous data transfer on multiple channels. Up to 4 GB of RAM can be implemented. Carrier board with complete I/O for development purposes and standard production...
Read More »CPU Board suits industrial applications.
Based on Pentium M processor, EUROCOM 300 PCI slot CPU Board can be used as pure computer core without I/O connections typical of PCs. Two Ethernet interfaces permit separation of machine network and control system, or support real-time Ethernet connections. Second version of board offers PC-typical interfaces on front panel. With timer and non-volatile, fast memory area of 512 KB, EUROCOM 300 is...
Read More »
PowerPC Board enables flexible expansion using PMC modules.
Basic Automation Board 760 is available with 933 MHz PowerPC 750 GX CPU with 1 MB on-chip cache or 600-800 MHz PowerPC 750 FX with 512 KB cache. It includes 8 MB flash EPROM, 512 KB boot ROM, 32-1,024 MB SDRAM, Discovery I chip set, PCI local bus, and 32-bit VMEbus. Board supports OS-9 and VxWorks real-time operating systems, as well as ELinOS as embedded LINUX. It meets requirements associated...
Read More »
Frame Grabber Board has 4 asynchonous input channels.
PC_EYE/ASYNC employs PCI Express bus interface for acquisition and simultaneous digitization of up to 4 independent (non-synchronized) camera signals. Images are stored in memory as 4 separate monochrome images in 8 bit-per-pixel format. Board is based on 2 programmable FPGAs with FIFOs, sequencers, and sync generators. Modifications to functionality of board's hardware are through software...
Read More »
Compact SBC is optimized for real-time applications.
Eurocom 258 compact PCI module is based on Intel 855GME chip set with 400 MHz front side bus, 1.6 GHz Pentium M processor, and 1 Mb L2 cache. Other features include up to 1 Gbyte DDR RAM, watchdog timer, 2 programmable 16-bit counters, COM1 port, mouse and keyboard ports, 2 USB 2.0 interfaces, and 2 serial channels with hardware handshake. SBC supports Windows 2000/XP, LINUX and VxWorks, making...
Read More »
Frame Grabber suits security and monitoring applications.
Model p3i_SEC records data from analog color cameras via 16 analog inputs, each of which contains separate A/D converter. Converters enable fast camera switching and use of mixed cameras with NTSC and PAL formats. Grabber offers on-board scaling function, PCI 2.2 support, and optional JPEG compression hardware. Images can be recorded in real-time, and saved in PC's main memory for further...
Read More »
Frame Grabber works with four analog cameras.
PC_EYE(R)_2+ quadro channel and RGB color frame grabber PCIbus board has 4 video input channels that can digitize 4 separate images in parallel from synchronized cameras. Drivers are provided for Linux and Windows(R) 98, ME, NT, and 2000 operating systems. Setup program provides test and configuration of board. Support for 3rd party imaging tools is available, including AdOculos(R), Heurisko(R),...
Read More »
PCIe Frame Grabber optimizes Camera Link device use.
PC_EYE/CL has inputs for digital video data compliant with Camera Link v1.2. Each of 2 Mini-Delta-Ribbon 26-pin connectors supports 4 ports, for total of 8 ports that can be used to connect 2 independent Base cameras, one Medium configuration camera, or one Full camera. Each 8-bit port uses 7:1 multiplexing scheme with serial transmission rate of 2.36 Gbps for optimal utilization of cable...
Read More »
Central Processing Unit consumes only 31 W.
Utilizing IntelÃ-® E7520 chipset, EUROCOMÃ-® 400 CPU features 2.0 GHz LV Dual-Core IntelÃ-® XeonÃ-® processor with dual CPU capabilities in combination with COM Express platform. Module architecture enables fast, simultaneous data transfer on multiple channels. Up to 4 GB of RAM can be implemented. Carrier board with complete I/O for development purposes and standard production...
Read More »CPU Board suits industrial applications.
Based on Pentium M processor, EUROCOM 300 PCI slot CPU Board can be used as pure computer core without I/O connections typical of PCs. Two Ethernet interfaces permit separation of machine network and control system, or support real-time Ethernet connections. Second version of board offers PC-typical interfaces on front panel. With timer and non-volatile, fast memory area of 512 KB, EUROCOM 300 is...
Read More »American Eltec Adds High-Tech Manufacturers Representatives
Las Vegas, NV, October 2005 - American ELTEC, has announced the addition of two new manufacturers representative organizations to provide sales and support service to its U.S. customer base. American ELTEC is the U.S. division of ELTEC Elektronik AG, Mainz, Germany, an innovator in the design and manufacture of high-performance embedded computer boards and system-level products for industrial...
Read More »
PowerPC Board enables flexible expansion using PMC modules.
Basic Automation Board 760 is available with 933 MHz PowerPC 750 GX CPU with 1 MB on-chip cache or 600-800 MHz PowerPC 750 FX with 512 KB cache. It includes 8 MB flash EPROM, 512 KB boot ROM, 32-1,024 MB SDRAM, Discovery I chip set, PCI local bus, and 32-bit VMEbus. Board supports OS-9 and VxWorks real-time operating systems, as well as ELinOS as embedded LINUX. It meets requirements associated...
Read More »
Frame Grabber Board has 4 asynchonous input channels.
PC_EYE/ASYNC employs PCI Express bus interface for acquisition and simultaneous digitization of up to 4 independent (non-synchronized) camera signals. Images are stored in memory as 4 separate monochrome images in 8 bit-per-pixel format. Board is based on 2 programmable FPGAs with FIFOs, sequencers, and sync generators. Modifications to functionality of board's hardware are through software...
Read More »
Compact SBC is optimized for real-time applications.
Eurocom 258 compact PCI module is based on Intel 855GME chip set with 400 MHz front side bus, 1.6 GHz Pentium M processor, and 1 Mb L2 cache. Other features include up to 1 Gbyte DDR RAM, watchdog timer, 2 programmable 16-bit counters, COM1 port, mouse and keyboard ports, 2 USB 2.0 interfaces, and 2 serial channels with hardware handshake. SBC supports Windows 2000/XP, LINUX and VxWorks, making...
Read More »
Frame Grabber suits security and monitoring applications.
Model p3i_SEC records data from analog color cameras via 16 analog inputs, each of which contains separate A/D converter. Converters enable fast camera switching and use of mixed cameras with NTSC and PAL formats. Grabber offers on-board scaling function, PCI 2.2 support, and optional JPEG compression hardware. Images can be recorded in real-time, and saved in PC's main memory for further...
Read More »
Frame Grabber works with four analog cameras.
PC_EYE(R)_2+ quadro channel and RGB color frame grabber PCIbus board has 4 video input channels that can digitize 4 separate images in parallel from synchronized cameras. Drivers are provided for Linux and Windows(R) 98, ME, NT, and 2000 operating systems. Setup program provides test and configuration of board. Support for 3rd party imaging tools is available, including AdOculos(R), Heurisko(R),...
Read More »