MaxLite, Inc

Outdoor LED Flood Lights deliver up to 56,910 lumens.
Architectural & Civil Engineering Products

Outdoor LED Flood Lights deliver up to 56,910 lumens.

Available in 180, 360, or 540 W with narrow, medium, or wide beam angle, StaxMAX LED Flood Lights allow users to create custom distribution by mixing modules on single fixture. Units have die cast aluminum body that acts as heat sink, enabling L70-rated LED lifetime between 75,000 and 90,000 hours. Tempered glass lens seals module to protect against dirt, dust, and water ingress to IP65 rating....

Read More »
ETL Wet-Listed LED Lamp suits outdoor signage applications.
Architectural & Civil Engineering Products

ETL Wet-Listed LED Lamp suits outdoor signage applications.

Helping hospitality market reduce power consumption and conserve energy, Wet-Listed Marquee LED Lamp replaces incandescent and CCFL lampsÂ- in outdoor signage applications. Construction optimizes thermal management, enabling L70-rated 50,000 hr lifetime. Consuming 2.5 W, warm white LED lamp comes in clear or frosted styles, switches on instantly to full brightness, and is designed...

Read More »
Vapor-Tight Linear LED Fixtures operate in harsh environments.
Architectural & Civil Engineering Products

Vapor-Tight Linear LED Fixtures operate in harsh environments.

Constructed with one-piece, non-corrosive, polycarbonate body, DLC-qualified LED Vapor Tight Linear Fixtures carry IP66 rating and can be installed by suspension or mounted to walls or ceilings. Thermal- and lumen-balanced light engines are engineered with low drive rates to allow cooler operating temperatures. Offered in 8 basic models covering 2 and 4 ft sizes and 30 and 50 W ratings, dimmable...

Read More »
LED Utility Wraps are DLC-listed for stairwell lighting.
Architectural & Civil Engineering Products

LED Utility Wraps are DLC-listed for stairwell lighting.

Designed to replace multiple F17 and F32 fluorescent lamps, LED Utility Wraps come in 2 and 4 ft LED models ranging from 20–50 W. Dimmable units operate on 120–277 V systems, offer CCTs of 4,000 and 5,000 K, and provide efficacies up to 107 lm/W. Constructed with heavy-gauge, 1-piece steel housing and full-length U-Wrap prismatic acrylic diffusers, fixtures deliver up to 10 fc from IES...

Read More »
Recessed LED Downlights combine efficiency, flexible installation.
Architectural & Civil Engineering Products

Recessed LED Downlights combine efficiency, flexible installation.

Suited for new construction applications, ENERGY STAR®-certified LED Architectural Recessed Downlights offer flexible installation options and quick connect LED module that facilitates electrical installation. Non-IC LED downlights are dimmable and can replace 50 W halogen, 39 W ceramic metal halide, and 100 W HID fixtures. Available in 3,000K and 4,000K CCTs, 4 in. model comes in 15 and 26...

Read More »
LED Residential Downlight Retrofits are Energy Star qualified.
Architectural & Civil Engineering Products

LED Residential Downlight Retrofits are Energy Star qualified.

Designed for recessed cans with nominal 6 in. dia, LED Residential Downlight Retrofits deliver color rendering index of 90. Units are available in 12 and 19 W models that capture warmth of 75 and 120 W incandescent fixtures, respectively, and deliver up to 1,200 lm. Dimmable down to 10% for additional energy savings, retrofits come with torsion springs and Edison-base adapter. Thermally protected...

Read More »
LED Panels replace fluorescent fixtures in drop ceilings.
Architectural & Civil Engineering Products

LED Panels replace fluorescent fixtures in drop ceilings.

Featuring slim installation depth for flush fit, FlatMAX Edge Lit LED Panels are fully dimmable and compatible with building controls, motion sensors, timers, and daylight harvesting systems. Panels come in 3,500, 4,100, and 5,000 K CCTs and deliver up to 4,500 lm with CRI of 80. Optic guide plate controls glare and provides uniform light distribution. Constructed with aluminum housing that...

Read More »
Lay-In LED Panel meets office lighting demands.
Architectural & Civil Engineering Products

Lay-In LED Panel meets office lighting demands.

Featuring MicroCell™ louvers and architectural styling, Micro-T™ Lay-In LED Panel comes in 1 x 4 ft, 2 x 2 ft,Â- and 2 x 4 ft configurations with 100° beam distribution, multiple color and lumen packages, and rear knockouts that facilitate installation. Dual-function precision optics reduce glare and increase efficiency, and damp-listed fixture is constructed with sheet...

Read More »
Damp-Listed LED Lamps serve as energy-efficient CFL replacements.
Architectural & Civil Engineering Products

Damp-Listed LED Lamps serve as energy-efficient CFL replacements.

Respectively designed to replace 13 and 18 W CFLs, 5 and 7 W LED PL Retrofit Lamps are available with GU24, GX23, and G24q pin base options. Lamp holder rotates 270°, and ballast bypass ensures maintenance-free operation. Offering instant-on capabilities, these lamps deliver CRI >82, uniform consistency, and 50,000 hr of operational life. Operation is from 120–277 V, and output ranges...

Read More »
LED Flood Lights deliver narrow beam distribution.
Architectural & Civil Engineering Products

LED Flood Lights deliver narrow beam distribution.

Featuring MaxFOCUS light collimator and thermal pressure plate, Small LED Flood Lights are DLC-qualified and available in 15, 25, and 45 W styles that deliver narrow beam optics from 72°Â- and wide beam from 101°. Wet-rated lights replace 100 W quartz halogen and 150 W and 175 W metal halide fixtures in landscapes, facades, displays, and signage. Constructed with IP65-rated cast...

Read More »

All Topics