Stafford Manufacturing Corp.
Wilmington, MA 01887
New Shaft Collars, Couplings & Mounting Components are Fully Corrosion-resistant
Shaft collars & mounting components come in 0.25” to 10” standard sizes and the couplings come in 0.25” to 3” sizes. Offered in 1-pc, 2-pc, hinged, set-screw and flanged styles with various bore configurations. Ideal for building food processing equipment, conveyors, and packaging systems requiring frequent wash-down.
Read More »
New Machinable Shaft-End Adapters are Designed for Use in Machinery, Materials Handling, and Packaging Systems
Come in three configurations where the female clamps onto the shaft end with: machinable male, full diameter customizable end, and flange style end. Offered in aluminum, steel, and stainless steel to accommodate shafts from 0.5 in. to 2.0” in.I.D. and provide range of inch and metric output ends. Can be provided with steps up and down sizes, various threads, custom bolt-hole patterns, indexers,...
Read More »
New Sleeve Couplings Feature Solid Center Section
Includes bore styles to accommodate hex, square, threaded and different size shafts. Available with Accu-Clamp™ design which incorporates integral self-centering clamping collars at both ends for mating two shafts with zero backlash and axial runout less than 0.001 TIR. Offered in 1-PC, 2-PC, heavy duty and customizable styles.
Read More »
New Shaft Collars and Couplings Can Incorporate with Threaded Bores
Features custom colors or finishes offered in anodized aluminum, painted steel, chrome, and other platings. Ideal for commercial agricultural machinery and desert tan and olive green for military applications. Offered in sizes from 1/8” to 6” I.D. and various one- and two- piece styles.
Read More »
New Rigid Shaft Couplings from Stafford Manufacturing Comes with Axial Keyways and Annular Keyways
Available in 1-piece, 2-piece, and 3-piece styles. Offered bore sizes from 1/4” to 3” I.D. machined from steel, stainless steel, and aluminum. Features are inch, metric, and combinations of both and step bores.
Read More »
Stafford Introduces Weldable Shaft Collars & Couplings to Solve Design and Maintenance Problems
Machined from ANSI 1018 steel and stainless steel, these weldable shaft collars and couplings let users add special features such as actuators, brackets, cams, connectors, flange mounts, levers, pins, and rods. WILMINGTON, MASS. (PRWEB) MAY 22, 2019 - Stafford Manufacturing Corp. has introduced a line of shaft collars, couplings, and mounts machined from ANSI 1018 steel and stainless steel to...
Read More »
New Stafford Shaft Collars, Couplings & Mounts Available in Standard Aluminum, Steel and Stainless Steel Parts
Include parts for attaching vision systems, sensors, grippers and other devices on drones permanently or adjustable and quick-change requirements. Enables OEMs to match design requirements for strength, weight and corrosion-resistance. Available in 0.125” to 14” I.D. sizes with various bore configurations, depending upon the part.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
Latest Shaft Collars from Stafford Offers Bi-Directional Axial Adjustability
The Adjustable Shaft Collars are suitable for applications that require fine-tune positioning in 0.0005 in. increments with 0.200 in. total adjustment. The units are made from steel and stainless steel and are available in standard 3/8 in. to 1-1/2 in. bore sizes. They provide micrometer-like adjustability of either or both collar faces.
Read More »
Stafford Presents Specialty Shaft Couplings to Address Different Mounting and Positioning Needs
The Specialty Shaft Couplings consist of PowerRing™ rigid shaft, precision sleeve, flange and remachineable couplings. The units are offered in 1/4 to 2 in. bore sizes in aluminum, steel, stainless steel and ANSI 1018 weldable steel. The couplings maintain precision shaft alignment by adjusting phase relationship between two shafts or a mounted component and maintains concentricity between two...
Read More »
New Shaft Collars, Couplings & Mounting Components are Fully Corrosion-resistant
Shaft collars & mounting components come in 0.25” to 10” standard sizes and the couplings come in 0.25” to 3” sizes. Offered in 1-pc, 2-pc, hinged, set-screw and flanged styles with various bore configurations. Ideal for building food processing equipment, conveyors, and packaging systems requiring frequent wash-down.
Read More »
New Machinable Shaft-End Adapters are Designed for Use in Machinery, Materials Handling, and Packaging Systems
Come in three configurations where the female clamps onto the shaft end with: machinable male, full diameter customizable end, and flange style end. Offered in aluminum, steel, and stainless steel to accommodate shafts from 0.5 in. to 2.0” in.I.D. and provide range of inch and metric output ends. Can be provided with steps up and down sizes, various threads, custom bolt-hole patterns, indexers,...
Read More »
New Sleeve Couplings Feature Solid Center Section
Includes bore styles to accommodate hex, square, threaded and different size shafts. Available with Accu-Clamp™ design which incorporates integral self-centering clamping collars at both ends for mating two shafts with zero backlash and axial runout less than 0.001 TIR. Offered in 1-PC, 2-PC, heavy duty and customizable styles.
Read More »
New Shaft Collars and Couplings Can Incorporate with Threaded Bores
Features custom colors or finishes offered in anodized aluminum, painted steel, chrome, and other platings. Ideal for commercial agricultural machinery and desert tan and olive green for military applications. Offered in sizes from 1/8” to 6” I.D. and various one- and two- piece styles.
Read More »
New Rigid Shaft Couplings from Stafford Manufacturing Comes with Axial Keyways and Annular Keyways
Available in 1-piece, 2-piece, and 3-piece styles. Offered bore sizes from 1/4” to 3” I.D. machined from steel, stainless steel, and aluminum. Features are inch, metric, and combinations of both and step bores.
Read More »
Stafford Introduces Weldable Shaft Collars & Couplings to Solve Design and Maintenance Problems
Machined from ANSI 1018 steel and stainless steel, these weldable shaft collars and couplings let users add special features such as actuators, brackets, cams, connectors, flange mounts, levers, pins, and rods. WILMINGTON, MASS. (PRWEB) MAY 22, 2019 - Stafford Manufacturing Corp. has introduced a line of shaft collars, couplings, and mounts machined from ANSI 1018 steel and stainless steel to...
Read More »
New Stafford Shaft Collars, Couplings & Mounts Available in Standard Aluminum, Steel and Stainless Steel Parts
Include parts for attaching vision systems, sensors, grippers and other devices on drones permanently or adjustable and quick-change requirements. Enables OEMs to match design requirements for strength, weight and corrosion-resistance. Available in 0.125” to 14” I.D. sizes with various bore configurations, depending upon the part.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
Latest Shaft Collars from Stafford Offers Bi-Directional Axial Adjustability
The Adjustable Shaft Collars are suitable for applications that require fine-tune positioning in 0.0005 in. increments with 0.200 in. total adjustment. The units are made from steel and stainless steel and are available in standard 3/8 in. to 1-1/2 in. bore sizes. They provide micrometer-like adjustability of either or both collar faces.
Read More »
Stafford Presents Specialty Shaft Couplings to Address Different Mounting and Positioning Needs
The Specialty Shaft Couplings consist of PowerRing™ rigid shaft, precision sleeve, flange and remachineable couplings. The units are offered in 1/4 to 2 in. bore sizes in aluminum, steel, stainless steel and ANSI 1018 weldable steel. The couplings maintain precision shaft alignment by adjusting phase relationship between two shafts or a mounted component and maintains concentricity between two...
Read More »