Freudenberg-NOK
Plymouth, MI 48170
Share:
New Pressure Compensation Element Used by ABT e-line Vehicles
Handles the technically-demanding task of managing both functions with a single component. Ensures that the housing does not deform when the air pressure changes during uphill and downhill driving. Produces all-electric e-Caddy and e-Transporter vans to deliver emission-free transportation and passenger movement.
Read More »
New Seal with Integrated Bearing Reduces Load and Vibration
Seal protects the sensor from penetration of dust, splash water and other media over the entire service life of the vehicle. Contains 35 percent less friction which reduces resistance during steering. Bearing withstands significant mechanical loads, sometimes as much as 3,000 Newton of radial force.
Read More »
New Levitorq Axial Thrust Washers Based on Hydrodynamic Oil Film Technology
Scoop feature moves fluid under washer to enable the application to run at high critical speeds up to 10,000 rpm and pressures without failure. Collects and push lubrication under the washer to enable high critical speeds and improved performance. Reduces weight, decrease friction and improves thickness/flatness control.
Read More »
New 75 FKM 585 Plus Coating Designed for Low Wear at High Revolution
Achieves optimum lubrication in gears and pumps with synthetic lubricants. Forms a flexible bond with the elastomer of the seal. Layer thickness of coating is a few hundred nanometers and its properties meet the standards of the manufacturers of industrial gear units with regard to oil/elastomer requirements.
Read More »
New Wedge-Shaped Seal Simplifies Installation During Absorber Manufacturing Process
Responds sensitively to bumps and other stimuli which improves the vehicle’s handling. Reduces the operational temperature of sealing system by 2 to 4°C. Top-facing conical contour design supports the component at the housing and appears wedge shaped in cross-section.
Read More »
Freudenberg Offers its Compact Omegat Seal Combined with PT2 Wiper
Sealing system in a steel mill often must withstand nonstop, 24/7 operation of the facility’s equipment. HAGC cylinder has a stroke of less than 2mm during operation at a frequency of up to 15 cycles per second. PU 21430 material offers abrasion and extrusion resistance.
Read More »
Freudenberg Helps the Growing Beverage Industry Keep Its Flavor
Plymouth, Mich. (USA), April 29, 2019. Enjoying a beer, soda or sparkling water has never come with as many options as it does today. From the ever-growing microbrew and craft beer trend that brings us seasonal and special edition suds, to machines that allow consumers to create their own soda flavor on the spot, expanded options are all the rage. With companies and breweries producing more...
Read More »
Protective Shields for Electric Cars
New Lightweight Solutions to Seal against Electromagnetic Radiation Weinheim (Germany), April 9, 2019. Electronic components in vehicles must be protected from disruptions caused by electromagnetic waves. Experts from Freudenberg Performance Materials and Freudenberg Sealing Technologies are working together on ways to provide shielding with plastic housings. In the future, they could partially...
Read More »Freudenberg Addresses Improved Test Method for High Performance Plastics
Plymouth, Mich. (USA), April 8, 2019. Engineering plastics are heavily used by manufacturers in many industries, including the automotive industry, in tribological applications. However, current standardized testing used to evaluate the performance of these plastics often falls short. To address this issue, Saikrishna Sundararaman, a senior scientist withFreudenberg-NOK Sealing Technologies,...
Read More »
Freudenberg Helps Manufacturers Optimize Hydraulic Cylinder Sealing Systems
Plymouth, Mich. (USA), March 11, 2019. With the goal of helping customers reduce the manufactured cost of hydraulic cylinders while optimizing performance and lifespan of their production equipment, Freudenberg-NOK Sealing Technologies has announced its new Freudenberg Perfect Cylinder program, a collaborative engineering and design approach with customers. Freudenberg-NOK runs the business...
Read More »
New Pressure Compensation Element Used by ABT e-line Vehicles
Handles the technically-demanding task of managing both functions with a single component. Ensures that the housing does not deform when the air pressure changes during uphill and downhill driving. Produces all-electric e-Caddy and e-Transporter vans to deliver emission-free transportation and passenger movement.
Read More »
New Seal with Integrated Bearing Reduces Load and Vibration
Seal protects the sensor from penetration of dust, splash water and other media over the entire service life of the vehicle. Contains 35 percent less friction which reduces resistance during steering. Bearing withstands significant mechanical loads, sometimes as much as 3,000 Newton of radial force.
Read More »
New Levitorq Axial Thrust Washers Based on Hydrodynamic Oil Film Technology
Scoop feature moves fluid under washer to enable the application to run at high critical speeds up to 10,000 rpm and pressures without failure. Collects and push lubrication under the washer to enable high critical speeds and improved performance. Reduces weight, decrease friction and improves thickness/flatness control.
Read More »
New 75 FKM 585 Plus Coating Designed for Low Wear at High Revolution
Achieves optimum lubrication in gears and pumps with synthetic lubricants. Forms a flexible bond with the elastomer of the seal. Layer thickness of coating is a few hundred nanometers and its properties meet the standards of the manufacturers of industrial gear units with regard to oil/elastomer requirements.
Read More »
New Wedge-Shaped Seal Simplifies Installation During Absorber Manufacturing Process
Responds sensitively to bumps and other stimuli which improves the vehicle’s handling. Reduces the operational temperature of sealing system by 2 to 4°C. Top-facing conical contour design supports the component at the housing and appears wedge shaped in cross-section.
Read More »
Freudenberg Offers its Compact Omegat Seal Combined with PT2 Wiper
Sealing system in a steel mill often must withstand nonstop, 24/7 operation of the facility’s equipment. HAGC cylinder has a stroke of less than 2mm during operation at a frequency of up to 15 cycles per second. PU 21430 material offers abrasion and extrusion resistance.
Read More »
Freudenberg Helps the Growing Beverage Industry Keep Its Flavor
Plymouth, Mich. (USA), April 29, 2019. Enjoying a beer, soda or sparkling water has never come with as many options as it does today. From the ever-growing microbrew and craft beer trend that brings us seasonal and special edition suds, to machines that allow consumers to create their own soda flavor on the spot, expanded options are all the rage. With companies and breweries producing more...
Read More »Freudenberg Sealing Technologies Board of Management Realigns with Retirement of COO
Dieter Schäfer to retire but will continue association with company Weinheim (Germany), April 17, 2019. Freudenberg Sealing Technologies today announced that Chief Operating Officer (COO) Dieter Schaefer will retire June 30, 2019. Schaefer, who is widely praised for his contributions to Freudenberg’s intense focus on quality and digitalization, has agreed to consult with the company for an...
Read More »
Protective Shields for Electric Cars
New Lightweight Solutions to Seal against Electromagnetic Radiation Weinheim (Germany), April 9, 2019. Electronic components in vehicles must be protected from disruptions caused by electromagnetic waves. Experts from Freudenberg Performance Materials and Freudenberg Sealing Technologies are working together on ways to provide shielding with plastic housings. In the future, they could partially...
Read More »Freudenberg Addresses Improved Test Method for High Performance Plastics
Plymouth, Mich. (USA), April 8, 2019. Engineering plastics are heavily used by manufacturers in many industries, including the automotive industry, in tribological applications. However, current standardized testing used to evaluate the performance of these plastics often falls short. To address this issue, Saikrishna Sundararaman, a senior scientist withFreudenberg-NOK Sealing Technologies,...
Read More »
