KNF Neuberger, Inc.

Solenoid-Driven FL 10 Diaphragm Pump is IP65 rated.
Fluid & Gas Flow Equipment

Solenoid-Driven FL 10 Diaphragm Pump is IP65 rated.

Solenoid-Driven FL 10 Diaphragm Pump utilizes spring tension in the linear solenoid drive. Unit is integrated with frequency-controlled drive which adjust the flow rate linearly. Product delivers 0 - 100 mL/min against atmospheric pressure and provides a maintenance-free lifetime of 10,000h. Diaphragm Pump can be operated up to 14.5 psig and is suitable for wet or dusty areas. FL 10 comes with...

Read More »
Diaphragm Metering Pump accurately dispenses adjustable volumes.
Fluid & Gas Flow Equipment

Diaphragm Metering Pump accurately dispenses adjustable volumes.

Able to accurately dispense liquids in adjustable volumes from 30–80 Â-µL/stroke, solenoid-driven FMM80 supports head materials that enable transfer of virtually all liquids, whether neutral or aggressive, and can be mounted in any position using manifold or tubing. Pump can be driven with single impulses to deliver discrete micro-volumes or operated with pulsed signal at frequencies up to...

Read More »
Brushless DC Motor powers liquid and gas OEM diaphragm pumps.
Electrical Equipment & Systems

Brushless DC Motor powers liquid and gas OEM diaphragm pumps.

With outside diameter of 32 mm, Type BL30 is designed to fit within standard compressor housings. Unit can be supplied in 12 or 24 V versions configured as eitherÂ- 2-wire or 4-wire solutions. All provide protection against reverse polarity, over-voltage, and over-temperature. IP54-rated for protection against dirt, dust, oil, and/or splashing water, motor integrates with Type NF30 and NF60...

Read More »
Multi-Headed Diaphragm Vacuum Pump maximizes flow of air and gas.
Fluid & Gas Flow Equipment

Multi-Headed Diaphragm Vacuum Pump maximizes flow of air and gas.

Providing automatic transfer or evacuation of air and gases, N950.50 Series pump has flow rates up to 50 Lpm and vacuum of less than 2 mbar abs. Compact, lightweight pump is liquid-tolerant and operates without oil, avoiding contamination of pumped medium. Product can be powered with brushless DC motor or worldwide motor with 100-240 V/50-60 Hz range. Applications include vacuum ovens and...

Read More »
Diaphragm Pumps transfer and dose liquids in lab.
Fluid & Gas Flow Equipment

Diaphragm Pumps transfer and dose liquids in lab.

Effective against pressures up to 90 psig, KNF SIMDOS® 10 Series transfers neutral or corrosive liquids with flow rate of 1-100 mL/min and dose volumes from 1-1,000 mL. Pumps can transfer viscous media at full flowrate up to 150 centistokes. Equipped with touch-control knob for setup and operation, pumps can run dry without damage, are self-priming up to 9 ft of water, and available with...

Read More »
Corrosion-Resistant Vacuum Pumps target lab applications.
Fluid & Gas Flow Equipment

Corrosion-Resistant Vacuum Pumps target lab applications.

Operating without pump oil or maintenance, LABOPORT® Vacuum Pumps integrate corrosion-resistant PTFE wetted parts, multi-port FFPM valves, and PTFE-bonded diaphragms. Portable units can handle most aggressive vapors and can tolerate occasional condensate. Depending on model, diaphragm pumps achieve flow rates to 60 L/min and generate vacuum to 29.9 in. Hg. Units are suited for laboratory...

Read More »
Solenoid-Driven FL 10 Diaphragm Pump is IP65 rated.
Fluid & Gas Flow Equipment

Solenoid-Driven FL 10 Diaphragm Pump is IP65 rated.

Solenoid-Driven FL 10 Diaphragm Pump utilizes spring tension in the linear solenoid drive. Unit is integrated with frequency-controlled drive which adjust the flow rate linearly. Product delivers 0 - 100 mL/min against atmospheric pressure and provides a maintenance-free lifetime of 10,000h. Diaphragm Pump can be operated up to 14.5 psig and is suitable for wet or dusty areas. FL 10 comes with...

Read More »
Diaphragm Metering Pump accurately dispenses adjustable volumes.
Fluid & Gas Flow Equipment

Diaphragm Metering Pump accurately dispenses adjustable volumes.

Able to accurately dispense liquids in adjustable volumes from 30–80 Â-µL/stroke, solenoid-driven FMM80 supports head materials that enable transfer of virtually all liquids, whether neutral or aggressive, and can be mounted in any position using manifold or tubing. Pump can be driven with single impulses to deliver discrete micro-volumes or operated with pulsed signal at frequencies up to...

Read More »
Brushless DC Motor powers liquid and gas OEM diaphragm pumps.
Electrical Equipment & Systems

Brushless DC Motor powers liquid and gas OEM diaphragm pumps.

With outside diameter of 32 mm, Type BL30 is designed to fit within standard compressor housings. Unit can be supplied in 12 or 24 V versions configured as eitherÂ- 2-wire or 4-wire solutions. All provide protection against reverse polarity, over-voltage, and over-temperature. IP54-rated for protection against dirt, dust, oil, and/or splashing water, motor integrates with Type NF30 and NF60...

Read More »
Multi-Headed Diaphragm Vacuum Pump maximizes flow of air and gas.
Fluid & Gas Flow Equipment

Multi-Headed Diaphragm Vacuum Pump maximizes flow of air and gas.

Providing automatic transfer or evacuation of air and gases, N950.50 Series pump has flow rates up to 50 Lpm and vacuum of less than 2 mbar abs. Compact, lightweight pump is liquid-tolerant and operates without oil, avoiding contamination of pumped medium. Product can be powered with brushless DC motor or worldwide motor with 100-240 V/50-60 Hz range. Applications include vacuum ovens and...

Read More »
Diaphragm Pumps transfer and dose liquids in lab.
Fluid & Gas Flow Equipment

Diaphragm Pumps transfer and dose liquids in lab.

Effective against pressures up to 90 psig, KNF SIMDOS® 10 Series transfers neutral or corrosive liquids with flow rate of 1-100 mL/min and dose volumes from 1-1,000 mL. Pumps can transfer viscous media at full flowrate up to 150 centistokes. Equipped with touch-control knob for setup and operation, pumps can run dry without damage, are self-priming up to 9 ft of water, and available with...

Read More »
Corrosion-Resistant Vacuum Pumps target lab applications.
Fluid & Gas Flow Equipment

Corrosion-Resistant Vacuum Pumps target lab applications.

Operating without pump oil or maintenance, LABOPORT® Vacuum Pumps integrate corrosion-resistant PTFE wetted parts, multi-port FFPM valves, and PTFE-bonded diaphragms. Portable units can handle most aggressive vapors and can tolerate occasional condensate. Depending on model, diaphragm pumps achieve flow rates to 60 L/min and generate vacuum to 29.9 in. Hg. Units are suited for laboratory...

Read More »

All Topics