Edmund Optics

Edmund Optics Presents EUV Flat Mirrors with Surface Roughness of Less than 3A RMS
Optics & Photonics

Edmund Optics Presents EUV Flat Mirrors with Surface Roughness of Less than 3A RMS

The Extreme Ultraviolet Flat Mirrors are offered in 5° and 45° AOI versions with ideal reflectivity at 13.5 nm. The units come with multi-layer, metal/semi-conductor coating. The 45° AOI mirrors are suitable for steering s-polarized beams whereas the 5° AOI mirrors are used with unpolarized beams. The mirrors come with a surface flatness of λ/10 at 632.8 nm and 6.35 mm thickness. They reduce...

Read More »
New TECHSPEC Nd:YAG Laser Line Mirrors are Manufactured Using a UV Grade Fused Silica Substrate
Optics & Photonics

New TECHSPEC Nd:YAG Laser Line Mirrors are Manufactured Using a UV Grade Fused Silica Substrate

Edmund’s TECHSPEC® Nd:YAG Laser Line Mirrors are available in 0° and 45° AOI options. The units offer damage thresholds up to 5 J/cm² at 355 nm, 10 ns pulses and a reflectivity of more than 99.98% reflectivity at 1064 nm. The mirror's provide a reflective surface that meets λ/10 surface accuracy and 10-5 scratch-dig surface quality. They are suitable for high power beam delivery and...

Read More »
New TECHSPEC Bandpass Filters Exhibit 5 nm Full-Width Half Max
Electronic Components & Devices

New TECHSPEC Bandpass Filters Exhibit 5 nm Full-Width Half Max

The TECHSPEC® Hard Coated OD 4.0 5 nm Bandpass Filters are available from 343 nm to 1064 nm center wavelengths in 12.5 mm, 25 mm, and 50 mm diameters. The units provide a surface quality 80-50 and covers 2nd and 3rd harmonic Nd:YLF and Nd:YAG lasers, diode lasers, and HeNe lasers. These filters block wavelengths ranging from 200-1200 nm. They are suitable for laser line separation, chemical...

Read More »
New TECHSPEC Fused Silica Wedge Prisms are Offered with 12 Arcsecond Wedge Tolerance
Optics & Photonics

New TECHSPEC Fused Silica Wedge Prisms are Offered with 12 Arcsecond Wedge Tolerance

Edmund Optics’ TECHSPEC® Fused Silica Wedge Prisms are available in diameters of 12.5 mm and 25.0 mm with nominal deviations from 0.5° to 5.0°. The unit’s laser coatings offer Rabs of <0.25% and induced damage thresholds of 3 J/cm² at 266 nm, 7.5 J/cm² at 355 nm, 10 J/cm² at 532 nm, and 15 J/cm² and at 1064 nm. They provide a pulse duration and pulse repetition rate of 20 ns and 20 Hz...

Read More »
New TECHSPEC HPi and HPr Series Lenses Offer Resolutions up to 9 MegaPixel Resolution
Optics & Photonics

New TECHSPEC HPi and HPr Series Lenses Offer Resolutions up to 9 MegaPixel Resolution

The Edmund Optics adds TECHSPEC® HPi and HPr Series Fixed Focal Length Lenses to its HP lens family.The HPi lenses are designed for instrumentation imaging applications and OEM applications that require reduced cost and lockable focus and iris adjustment. The HPr lenses are offered with a stainless steel locking C-mount clamp and are calibrated for measurement and gauging, 3D stereo vision,...

Read More »
Diamond Turning Technique Offers Surface Profiles with Accuracies of Few Nanometers
Material Handling & Storage

Diamond Turning Technique Offers Surface Profiles with Accuracies of Few Nanometers

Edmund Optics’ Diamond Turning Technique involves mechanical machining of precision elements using machines with diamond-tipped tool bits. Edmund produces off-axis parabolic mirrors, off-axis elliptical mirrors and precision metal, plastic, and crystalline optical components. Diamond Turning is available in three capabilities commercial, precision and high precision with λ, λ/2 and λ/8...

Read More »
Edmund Optics Introduces Fused Silica Right Angle Prisms which Provide Minimal Wavefront Distortion
Optics & Photonics

Edmund Optics Introduces Fused Silica Right Angle Prisms which Provide Minimal Wavefront Distortion

TECHSPEC® Nd: YAG laser line λ/20 UV fused silica right angle prisms provide precise λ/20 surface flatness and 20-10 surface quality. ROHS compliant prisms are manufactured from fused silica substrate and feature a ±15 arcsec angular tolerance ensuring consistent alignment for volume integration. The prisms are available in both standard and custom sizes from 5-25mm. They are ideal for beam...

Read More »
New TECHSPEC UCi Series Fixed Focal Length Lenses Available in 21 Models and Feature 4K Resolution
Optics & Photonics

New TECHSPEC UCi Series Fixed Focal Length Lenses Available in 21 Models and Feature 4K Resolution

USA-Edmund Optics® introduces TECHSPEC® UCi series fixed focal length lenses designed for space-limited and OEM applications. The lenses are designed for small pixels less than 2.2µm and ideal for use with M12 x 0.5 S-Mount cameras. These lenses are available with focal lengths of 4mm, 6mm or 12mm and each lens is coated with a MgF2 anti-reflective coating. The RoHS compliant lenses offer...

Read More »
Edmund Optics&reg; Introduces TECHSPEC&reg; DA Fixed Broadband Beam Expanders that Provide Maximum Flexibility
Electronic Components & Devices

Edmund Optics® Introduces TECHSPEC® DA Fixed Broadband Beam Expanders that Provide Maximum Flexibility

New TECHSPEC® DA (Divergent Adjustable) Fixed Broadband Beam Expanders from Edmund Optics feature a 1940 nm design wavelength to compliment lasers with wavelengths from 1900-2100 nm. Offered in both low- and high-power versions, the designs achieve λ/10 transmitted wavefront error. Applications include medical surgery and plastic processing because of their unique absorption characteristics and...

Read More »
Edmund Optics&reg; Honored by Vision Systems Design 2018 Innovators Awards Program
Optics & Photonics

Edmund Optics® Honored by Vision Systems Design 2018 Innovators Awards Program

TECHSPEC® Cr Series Fixed Focal Length Lenses Recognized with Silver Award April 25, 2018, Barrington, NJ USA -- Edmund Optics® (EO), the premier provider of optical components, is proud to announce that their TECHSPEC® Cr Series Fixed Focal Length Lenses won a Silver-Level 2018 VSD Innovators Award in the lighting, lenses and optics category. Honorees of the Vision Systems Design...

Read More »
Edmund Optics Presents EUV Flat Mirrors with Surface Roughness of Less than 3A RMS
Optics & Photonics

Edmund Optics Presents EUV Flat Mirrors with Surface Roughness of Less than 3A RMS

The Extreme Ultraviolet Flat Mirrors are offered in 5° and 45° AOI versions with ideal reflectivity at 13.5 nm. The units come with multi-layer, metal/semi-conductor coating. The 45° AOI mirrors are suitable for steering s-polarized beams whereas the 5° AOI mirrors are used with unpolarized beams. The mirrors come with a surface flatness of λ/10 at 632.8 nm and 6.35 mm thickness. They reduce...

Read More »
New TECHSPEC Nd:YAG Laser Line Mirrors are Manufactured Using a UV Grade Fused Silica Substrate
Optics & Photonics

New TECHSPEC Nd:YAG Laser Line Mirrors are Manufactured Using a UV Grade Fused Silica Substrate

Edmund’s TECHSPEC® Nd:YAG Laser Line Mirrors are available in 0° and 45° AOI options. The units offer damage thresholds up to 5 J/cm² at 355 nm, 10 ns pulses and a reflectivity of more than 99.98% reflectivity at 1064 nm. The mirror's provide a reflective surface that meets λ/10 surface accuracy and 10-5 scratch-dig surface quality. They are suitable for high power beam delivery and...

Read More »
New TECHSPEC Bandpass Filters Exhibit 5 nm Full-Width Half Max
Electronic Components & Devices

New TECHSPEC Bandpass Filters Exhibit 5 nm Full-Width Half Max

The TECHSPEC® Hard Coated OD 4.0 5 nm Bandpass Filters are available from 343 nm to 1064 nm center wavelengths in 12.5 mm, 25 mm, and 50 mm diameters. The units provide a surface quality 80-50 and covers 2nd and 3rd harmonic Nd:YLF and Nd:YAG lasers, diode lasers, and HeNe lasers. These filters block wavelengths ranging from 200-1200 nm. They are suitable for laser line separation, chemical...

Read More »
New TECHSPEC Fused Silica Wedge Prisms are Offered with 12 Arcsecond Wedge Tolerance
Optics & Photonics

New TECHSPEC Fused Silica Wedge Prisms are Offered with 12 Arcsecond Wedge Tolerance

Edmund Optics’ TECHSPEC® Fused Silica Wedge Prisms are available in diameters of 12.5 mm and 25.0 mm with nominal deviations from 0.5° to 5.0°. The unit’s laser coatings offer Rabs of <0.25% and induced damage thresholds of 3 J/cm² at 266 nm, 7.5 J/cm² at 355 nm, 10 J/cm² at 532 nm, and 15 J/cm² and at 1064 nm. They provide a pulse duration and pulse repetition rate of 20 ns and 20 Hz...

Read More »
New TECHSPEC HPi and HPr Series Lenses Offer Resolutions up to 9 MegaPixel Resolution
Optics & Photonics

New TECHSPEC HPi and HPr Series Lenses Offer Resolutions up to 9 MegaPixel Resolution

The Edmund Optics adds TECHSPEC® HPi and HPr Series Fixed Focal Length Lenses to its HP lens family.The HPi lenses are designed for instrumentation imaging applications and OEM applications that require reduced cost and lockable focus and iris adjustment. The HPr lenses are offered with a stainless steel locking C-mount clamp and are calibrated for measurement and gauging, 3D stereo vision,...

Read More »
Diamond Turning Technique Offers Surface Profiles with Accuracies of Few Nanometers
Material Handling & Storage

Diamond Turning Technique Offers Surface Profiles with Accuracies of Few Nanometers

Edmund Optics’ Diamond Turning Technique involves mechanical machining of precision elements using machines with diamond-tipped tool bits. Edmund produces off-axis parabolic mirrors, off-axis elliptical mirrors and precision metal, plastic, and crystalline optical components. Diamond Turning is available in three capabilities commercial, precision and high precision with λ, λ/2 and λ/8...

Read More »
Company News

Edmund Optics® Enhances Precision Optical Coating Competency with VEECO Ion Beam Sputtering System

Leader in Optics and Imaging Strengthens Capabilities with Precision Coating Technology and Additional Investments June 27, 2018, Barrington, NJ, and Plainview, NY- Edmund Optics®, the world's leading supplier of optical components, has ordered the SPECTOR® Ion Beam Sputtering System from Veeco Instruments Inc. (Nasdaq: VECO). The new capability is in support of Edmund Optics'...

Read More »
Edmund Optics Introduces Fused Silica Right Angle Prisms which Provide Minimal Wavefront Distortion
Optics & Photonics

Edmund Optics Introduces Fused Silica Right Angle Prisms which Provide Minimal Wavefront Distortion

TECHSPEC® Nd: YAG laser line λ/20 UV fused silica right angle prisms provide precise λ/20 surface flatness and 20-10 surface quality. ROHS compliant prisms are manufactured from fused silica substrate and feature a ±15 arcsec angular tolerance ensuring consistent alignment for volume integration. The prisms are available in both standard and custom sizes from 5-25mm. They are ideal for beam...

Read More »
New TECHSPEC UCi Series Fixed Focal Length Lenses Available in 21 Models and Feature 4K Resolution
Optics & Photonics

New TECHSPEC UCi Series Fixed Focal Length Lenses Available in 21 Models and Feature 4K Resolution

USA-Edmund Optics® introduces TECHSPEC® UCi series fixed focal length lenses designed for space-limited and OEM applications. The lenses are designed for small pixels less than 2.2µm and ideal for use with M12 x 0.5 S-Mount cameras. These lenses are available with focal lengths of 4mm, 6mm or 12mm and each lens is coated with a MgF2 anti-reflective coating. The RoHS compliant lenses offer...

Read More »

All Topics