IMI Precision Engineering

Manifold Assemblies simplify control valve installation.
Fluid & Gas Flow Equipment

Manifold Assemblies simplify control valve installation.

Suited for deployment in systems that require gang mounting of solenoid valves, KIP manifold assemblies can integrate system components such as pressure switches, check valves, regulators, and gauges into one package. Maintenance or replacement of valves is accomplished by unplugging valve, and user does not need to disconnect pneumatic plumbing. Manufactured in materials such as brass, aluminum,...

Read More »
Valve works as motion and fluid control circuit.
Fluid & Gas Flow Equipment

Valve works as motion and fluid control circuit.

Utilizing quick connect concept, Q2 plastic body valve can be assembled into motion or fluid control circuit. Product delivers minimal pressure drops and is designed to be durable, handling pressures from 5-120 psi. Lightweight unit, which carries NSF and cURus approvals, operates in environments that require ambient temperatures from -10 to +100°F.

Read More »
Distributed I/O System is suited for use in fieldbus systems.

Distributed I/O System is suited for use in fieldbus systems.

FD67 modular distributed I/O pneumatic system includes debugging facility with single channel diagnosis and shut down. Starting with fieldbus coupler, I/O layer is distributed close to sensors and actuators and not concentrated in one place. System is connected by one hybrid cable for supply and communication. Fully encapsulated electronics and IP67 rating makes system suitable for washdown...

Read More »
Pneumatic Valves offer I/O capabilities.
Fluid & Gas Flow Equipment

Pneumatic Valves offer I/O capabilities.

Series VS plug-in, subbase valves are available in soft seal spool models and glandless spool and sleeve units with operational figures of 200 million cycles. Offered with 3 different port options, valves come in 18 or 26 mm widths, with flow rates of 550-650 l/min and 1,000-1,350 l/min, respectively. Units accommodate Profibus-DP, DeviceNet, CANopen, Interbus-S, AS-interface, and AB RIO...

Read More »
Rotary Hand Valves withstand harsh operating conditions.
Fluid & Gas Flow Equipment

Rotary Hand Valves withstand harsh operating conditions.

Made from die cast aluminum, Series VHLA features rotating handle and detented center position. Units have max operating pressure of 140 psi combined with temperature range of 40-140°F. Suited for use in compressed air environments, pneumatic valves are available in Cvs of 0.4-3.1 and port sizes of Â-¼, 3/8, and ½ in. Two- and three-position variants can be specified.

Read More »
Tube Fittings work in pneumatic and water circuits.
Fluid & Gas Flow Equipment

Tube Fittings work in pneumatic and water circuits.

All-metal WeldFit fittings help reduce assembly times and provide quick disconnection to enable re-tubing of system if it needs to be changed. Nickel-plated products feature silicone free O-rings and provide system protection from weld spatter. Rated for operating temperatures from -20 to 160°F, fittings are used in conjunction with WeldTube. Counterbored collet head provides complete...

Read More »
Rotary Actuators provide rotation flexibility.
Mechanical Power Transmission

Rotary Actuators provide rotation flexibility.

Available in non-magnetic and magnetic models, double-acting, rack and pinion actuators feature male and female pinion variants, both with adjustable cushioning. Products feature operating pressures from 21-145 psi and are suited for compressed air environments. Offered in 90°, 180°, 270° and 360° rotation angles, actuators are available with 7 cylinder diameters and are...

Read More »
Fittings connect tubes to pneumatic components.
Fluid & Gas Flow Equipment

Fittings connect tubes to pneumatic components.

Pneufit C Series push-to-connect fittings covers tube sizes from 4-16 mm and 5/32 to 12 in. Able to grip polyurethane and nylon tube, components feature recessed captive O-rings on parallel threads and pre-applied thread sealant on all taper threads. Pneufit M fittings, suited for applications where space is limited, offer tube sizes of 3, 4, or 6 mm with M3 to 1/8 in. ISO R threads. Inch tubes...

Read More »
Liquid Level Switches works with various media.

Liquid Level Switches works with various media.

Multi-point, liquid level switches enable users to choose standard or custom detectors for multi-point applications. Overall length is available up to 72 in., with up to 6 actuation control points on one tank entry. Mounting styles include Â-½, 1¼, 1½, and 2 in. NPT; 3 in. 150 lb CS Flange; and ½ in. Tubing, and floats are available in 316 SS, Buna N, and PVC...

Read More »

All Topics