OKW Enclosures, Inc.

OKW Introduces EVOTEC Table-Top Enclosures for Access Control Applications
Architectural & Civil Engineering Products

OKW Introduces EVOTEC Table-Top Enclosures for Access Control Applications

The EVOTEC Table-Top Enclosures are suitable for measurement and control engineering, IT, medical, laboratory and environmental technology. They consist of an adapter attached to enclosure and a holder fitted to the wall. The unit’s adapter (4.17 in. x 2.95 in.) and holder are moulded from UV-stable ASA+PC-FR. The holder of the enclosure is fitted to the wall with the help of four screws that...

Read More »
New Canting Cases Provide an Inclination of 12 Degrees
Architectural & Civil Engineering Products

New Canting Cases Provide an Inclination of 12 Degrees

The Canting Cases are available in 7.95, 9.52 and 11.10 in. lengths with 6.69 in. width and 1.96 in. height. The units come with flat anodized end panels or molded covers in UV stable lava grey ASA+PC-FR. The cases feature four non-slip rubber feet and inclines the SMART-TERMINAL enclosure by 12° operating angle. The covers are placed inside soft-touch TPV gray or green seals and are suitable...

Read More »
New SMART-TERMINAL Enclosures Come with Flat Aluminum End Plates
Architectural & Civil Engineering Products

New SMART-TERMINAL Enclosures Come with Flat Aluminum End Plates

OKW’s SMART-TERMINAL Enclosures are available in one width (6.69 in.) and height (1.96 in.) and three standard lengths 6.45 in., 8.03 in. and 9.60 in. The enclosures are designed for communications, safety engineering, biometrics, healthcare, measurement and control engineering. The units come in matt anodized aluminum case with large recessed areas on the top for displays, membrane keypads and...

Read More »
Custom-Width Sloping Front Enclosures from METCASE
Architectural & Civil Engineering Products

Custom-Width Sloping Front Enclosures from METCASE

METCASE can supply its modern and robust UNIDESK aluminum sloping front enclosures in custom widths to suit customer requirements. Robust and attractive UNIDESK is suitable for a wide range of applications including office systems, point-of-sale terminals, medical devices, industrial control equipment, security units and machine controllers. These versatile and ergonomic aluminum enclosures are...

Read More »
New EVOTEC 100 Plan Size with Flat Top and Inclined Top Versions
Architectural & Civil Engineering Products

New EVOTEC 100 Plan Size with Flat Top and Inclined Top Versions

OKW’s 100 Plan Size EVOTEC comes in two versions, one with a large flat top for switches, push buttons, touch displays and other with 12-degree inclined top for desktop applications. The product is available in off-white as standard. The enclosures have screw pillars both in top and base for installing PCBs using Torx assembly screws preventing tampering. It is used for measurement and control...

Read More »
OKW Launches New CARRYTEC Enclosures with Side Bags for Instruments, Sensors and Cable Attachments
Architectural & Civil Engineering Products

OKW Launches New CARRYTEC Enclosures with Side Bags for Instruments, Sensors and Cable Attachments

OKW Launches New CARRYTEC Enclosures are available from 8.74 x 8.07 x 3.14 in. to 13.70 x 11.92 x 4.60 in. dimensions. CARRYTEC enclosures are suitable for applications such as communications, data recording, agriculture and forest management. Unit’s bags are offered in sizes of S (3.22 x 7.08 x 2.56 in.) and M (3.89 x 8.42 x 2.52 in.). The bags feature tough integrated handle and are molded...

Read More »
EVOTEC Desktop Enclosures are Available in Three Plan Sizes
Architectural & Civil Engineering Products

EVOTEC Desktop Enclosures are Available in Three Plan Sizes

EVOTEC is molded from ASA+PC-FR (UL 94 V-0) and offered in size 150 and the standard off-white color. Features include PCB screw pillars, self-adhesive rubber feet, and torx assembly screws. Available in two versions, EVOTEC comes with an optional IP 65 protection. Version 1 has a flat top while Version 2 has a smooth sloping top, inclined at 12°. Package includes an IP 65 seal, a wall mounting...

Read More »
Smart-Terminal Enclosures feature matt anodized aluminum case body.
Architectural & Civil Engineering Products

Smart-Terminal Enclosures feature matt anodized aluminum case body.

Smart-Terminal Plastic Enclosures are offered in 6.69 in. width and 1.96 in. height with standard lengths of 6.29 in., 7.87 in. and 9.44 in. These enclosures are suitable for interface equipment, communications, safety engineering, biometrics, medical and laboratory applications. Unit’s end covers are molded from UV-stable ASA+PC-FR. Enclosures come with case canting kit, four M3 square head...

Read More »
BODY-CASE Enclosure comes with two 18 mm spring bars.
Architectural & Civil Engineering Products

BODY-CASE Enclosure comes with two 18 mm spring bars.

BODY-CASE Enclosure is offered in M 1.96 x 1.61 x 0.65 in. and L 2.16 x 1.81 x 0.66 in. sizes. Product includes top section with PCB location bars, bottom section with four pre-molded drilling centre and a soft-touch matt sealing ring. Meeting IP 65 and IP 67 protection rating, unit’s top and bottom is molded from UV-stable ASA whereas sealing ring is made from Lava or Vermilion TPE. This...

Read More »
OKW Introduces EVOTEC Table-Top Enclosures for Access Control Applications
Architectural & Civil Engineering Products

OKW Introduces EVOTEC Table-Top Enclosures for Access Control Applications

The EVOTEC Table-Top Enclosures are suitable for measurement and control engineering, IT, medical, laboratory and environmental technology. They consist of an adapter attached to enclosure and a holder fitted to the wall. The unit’s adapter (4.17 in. x 2.95 in.) and holder are moulded from UV-stable ASA+PC-FR. The holder of the enclosure is fitted to the wall with the help of four screws that...

Read More »
New Canting Cases Provide an Inclination of 12 Degrees
Architectural & Civil Engineering Products

New Canting Cases Provide an Inclination of 12 Degrees

The Canting Cases are available in 7.95, 9.52 and 11.10 in. lengths with 6.69 in. width and 1.96 in. height. The units come with flat anodized end panels or molded covers in UV stable lava grey ASA+PC-FR. The cases feature four non-slip rubber feet and inclines the SMART-TERMINAL enclosure by 12° operating angle. The covers are placed inside soft-touch TPV gray or green seals and are suitable...

Read More »
New SMART-TERMINAL Enclosures Come with Flat Aluminum End Plates
Architectural & Civil Engineering Products

New SMART-TERMINAL Enclosures Come with Flat Aluminum End Plates

OKW’s SMART-TERMINAL Enclosures are available in one width (6.69 in.) and height (1.96 in.) and three standard lengths 6.45 in., 8.03 in. and 9.60 in. The enclosures are designed for communications, safety engineering, biometrics, healthcare, measurement and control engineering. The units come in matt anodized aluminum case with large recessed areas on the top for displays, membrane keypads and...

Read More »
Custom-Width Sloping Front Enclosures from METCASE
Architectural & Civil Engineering Products

Custom-Width Sloping Front Enclosures from METCASE

METCASE can supply its modern and robust UNIDESK aluminum sloping front enclosures in custom widths to suit customer requirements. Robust and attractive UNIDESK is suitable for a wide range of applications including office systems, point-of-sale terminals, medical devices, industrial control equipment, security units and machine controllers. These versatile and ergonomic aluminum enclosures are...

Read More »
New EVOTEC 100 Plan Size with Flat Top and Inclined Top Versions
Architectural & Civil Engineering Products

New EVOTEC 100 Plan Size with Flat Top and Inclined Top Versions

OKW’s 100 Plan Size EVOTEC comes in two versions, one with a large flat top for switches, push buttons, touch displays and other with 12-degree inclined top for desktop applications. The product is available in off-white as standard. The enclosures have screw pillars both in top and base for installing PCBs using Torx assembly screws preventing tampering. It is used for measurement and control...

Read More »
OKW Launches New CARRYTEC Enclosures with Side Bags for Instruments, Sensors and Cable Attachments
Architectural & Civil Engineering Products

OKW Launches New CARRYTEC Enclosures with Side Bags for Instruments, Sensors and Cable Attachments

OKW Launches New CARRYTEC Enclosures are available from 8.74 x 8.07 x 3.14 in. to 13.70 x 11.92 x 4.60 in. dimensions. CARRYTEC enclosures are suitable for applications such as communications, data recording, agriculture and forest management. Unit’s bags are offered in sizes of S (3.22 x 7.08 x 2.56 in.) and M (3.89 x 8.42 x 2.52 in.). The bags feature tough integrated handle and are molded...

Read More »
EVOTEC Desktop Enclosures are Available in Three Plan Sizes
Architectural & Civil Engineering Products

EVOTEC Desktop Enclosures are Available in Three Plan Sizes

EVOTEC is molded from ASA+PC-FR (UL 94 V-0) and offered in size 150 and the standard off-white color. Features include PCB screw pillars, self-adhesive rubber feet, and torx assembly screws. Available in two versions, EVOTEC comes with an optional IP 65 protection. Version 1 has a flat top while Version 2 has a smooth sloping top, inclined at 12°. Package includes an IP 65 seal, a wall mounting...

Read More »
Smart-Terminal Enclosures feature matt anodized aluminum case body.
Architectural & Civil Engineering Products

Smart-Terminal Enclosures feature matt anodized aluminum case body.

Smart-Terminal Plastic Enclosures are offered in 6.69 in. width and 1.96 in. height with standard lengths of 6.29 in., 7.87 in. and 9.44 in. These enclosures are suitable for interface equipment, communications, safety engineering, biometrics, medical and laboratory applications. Unit’s end covers are molded from UV-stable ASA+PC-FR. Enclosures come with case canting kit, four M3 square head...

Read More »
BODY-CASE Enclosure comes with two 18 mm spring bars.
Architectural & Civil Engineering Products

BODY-CASE Enclosure comes with two 18 mm spring bars.

BODY-CASE Enclosure is offered in M 1.96 x 1.61 x 0.65 in. and L 2.16 x 1.81 x 0.66 in. sizes. Product includes top section with PCB location bars, bottom section with four pre-molded drilling centre and a soft-touch matt sealing ring. Meeting IP 65 and IP 67 protection rating, unit’s top and bottom is molded from UV-stable ASA whereas sealing ring is made from Lava or Vermilion TPE. This...

Read More »

All Topics