Midwest Motion Products
Howard Lake, MN 55349
Linear Actuators carry load over 50-300 mm stroke.
Accepting 12, 24, or 35 Vdc power, low noise dc Series MMP.LA-3 delivers up to 170 lb of force, and is available with stroke lengths of 50, 100, 200, 250, and 300 mm. Selection of output speeds are provided with gear ratios of 5:1, 10:1, 20:1, and 30:1. Lubricated for life, standard unit features built-in limit switches, non-rotating inner tube, aluminum outer tube, and corrosion resistance....
Read More »Motor Speed Control is fully potted for harsh environments.
Operating from 10-20 Vdc, Model MMP25A-12V features INTERNAL 3300 micro farad electrolytic filter capacitor for ac ripple control. Solid state PWM, unidirectional unit is suited for any battery-powered or other dc power sourced applications that require adjustable speed of dc motor or gear motor. Able to deliver 25 A at nominal 12 Vdc, fully encapsulated control provides up to 500 W of output and...
Read More »Servo Drive can operate on 20-100 Vdc.
Measuring 6.5 x 1.4 x 1.4 in., Model MMP-M1525-BR-24V features adjustable peak and continuous current limiting, current monitoring, limit switch inputs, and inhibit input. It also offers fault output, tachometer scaling, and LED display diagnostics. PWM Servo amplifier has continuous output current capacity of 15 A, 25 A peak, while brushed motor amplifier accepts typ input command signal of Ã-
Read More »Brushless DC Gearmotor has integral optical encoder.
Operating as hall cell commutated brushless motor, 24 V Model No. MMP.BL3056-24V.GPT-071.E-1024 measures 109 mm long x 32 mm dia and has true planetary gearbox. Output shaft, which measures 15 mm long x 6 mm dia, is provided with Shaft Flat for secure coupling to load. Motor is equipped with 71:1 gear ratio and rated for 3 Nm continuous torque at 3.6 A. Capable of 6.5 Nm peak torque, product is...
Read More »Brushed Motor Speed Control accepts standard 115 Vac input.
Suited for 12 Vdc motors and gearmotors, Model MMP.115VAC-12VDC features continuous output of 5 A at 12 Vdc out. DC power supply and control module are packaged in 6 x 6 in. aluminum base plate. Each unit is provided with 10 Kohm speed adjust potentiometer, plus terminals and connectors required to provide ac input to on-board power supply. Chassis has 4 through-holes for mounting, measuring...
Read More »Miniature DC Gearmotor runs on any 12 Vdc power source.
Mounted via series of 6 threaded holes in face of gearbox, MMP.PDSG35-12V.400.1 is equipped with 400:1 gear ratio and is rated for 94 oz-in. continuous torque at 0.5 A of current. It measures 37 mm dia x 61 mm long, with 6 mm dia x 15 mm long output shaft, and delivers 12 rpm output speed under full load. Options include integral optical encoders, failsafe brakes, analog tachometers, and ratios...
Read More »DC Gearmotor is tested to 1,150 lb-in. of output torque.
Able to run on any 24 Vdc power source, Model MMP.C21.230B-24V.GP52-236.1 has true planetary gearbox and measures 52 mm in dia x 230 mm long. Output shaft is .500 in. in diam x 2.25 in. long and provided with shaft keyway. Rated for 358 lb-in. of continuous torque @ 6.6 A of current, product is available with integral optical encoders, failsafe brakes, analog tachometers, and ratios from 3:1 to...
Read More »DC Gear Motor accepts any 90 Vdc power source.
Equipped with 180:1 gear ratio, Model MMP.PDSF80-90V.180 is rated for 70 lb-in. continuous torque at 0.9 A of current. Unit measures 2.8 in. dia x 6 in. long with 80 mm square gearbox. Measuring 10 mm dia, output shaft is provided with square shaft key and keyway. Mounting is accomplished with 4 in. face mount threaded screws, 68 mm apart. Options include integral optical encoders, failsafe...
Read More »Reversible DC Gear Motor offers output speed of 160 rpm.
Accepting any 12 Vdc power source including batteries, Model MMP.PDSF80-12V.018.1 measures 2.8 in. diameter x 5.6 in. long with 80 mm square gearbox. Output shaft is 10 mm diameter, and is provided with square shaft key and keyway. Equipped with 18:1 gear ratio, motor is rated for 26 lb-in. of continuous torque at 3.9 A of current, and is capable of 70 lb-in. of peak torque. Mounting is...
Read More »DC Servo Motor includes integral analog tachometer.
Measuring 2.14 in. dia x 5.96 in. long with 0.375 in. dia stainless steel output shaft, Model MMP-C21.175E-24V.T-03 requires 3.4 A at 24 Vdc to generate full power. Integral tachometer provides positive, linear feedback signal for closed-loop servo applications at rate of 3 Vdc per 1,000 rpm of rotation. Delivering 80 W of continous output power at 5,000 rpm, motor is rated for 30 oz-in. of...
Read More »