FloCat
Racine, WI 53404
Share:
Flow Sensor provides dosing control.
Model UB45-A utilizes paddle wheel design to measure continuous flows of solid-free liquids. Three body material choices and several connection options allow use of meter in neutral and slightly aggressive fluid media. Measuring range is 1.0-33 fps in pipe diameters from Ã-½-2 in. When paired with electronic modules, Model UB45-A offers flow indicator, flow transmitter, flow switch, or batch...
Read More »
Flow Meter measures very low flows.
Series C-OK45-DL turbine flow meter uses pelton-wheel principle to measure flow of water and other low-viscosity liquids. Flow ranges are from 0.24-11.1 gph to 0.8-80 gph and accuracy is Ã-
Read More »
Flow Meter clamps on 1/2 to 2 in. diameter pipes.
FloCat C-YD50-C Compact Ultrasonic Transit Time Clamp-on Flow Meter measures liquids containing less than 40% total suspended solids or aeration. Non-invasive unit is offered with or without local display. It provides 4-20 mA analog output and choice of simulated turbine meter or TTL-pulse frequency output, allowing direct interface to data collection systems. UltraLink WindowsÃ-®-based...
Read More »
In-Line Turbine Flow Meters use one moving part.
Series C-ES45-C 2-8 in. flow meters use 1 precision-machined helical rotor as only moving part. Rotation is electronically detected and processed. Jewel bearings and polished tungsten-carbide shafts minimize friction. Available with blind pulse or 4-20 mA output, units are provided with individually calibrated turbine meters. Modular electronics can be meter- or remote-mounted for transmitting...
Read More »
Flow Switch protects against flow variation.
Vane operated C-WD15-S0 is magnetically actuated and supplied with field adjustable multi-layer vanes for installation in pipes from 1 1/2 to 20 in. Unit fits directly into pipeline tee, thredolet, or flange and meets NEMA-4 watertight construction. It is explosion proof and withstands pressures to 2,000 psig. There are no bellows, springs, or seals to fail. C-WD15-S0 is suitable for fluids and...
Read More »
Turbine Meter offers low flow measurement.
C-OH45-A Low Flow Turbine Meter is based on pelton wheel-like rotor and features 316 stainless steel housing and self-lubricating ball bearings. It offers flow measurement for clean, low and moderate viscosity liquids in 12 overlapping ranges from 0.015 to 3.00 gpm, with accuracy of +/-1% (after linearization) over 10:1 flow range. Unit has max pressure rating of 1,000 psi and temperature range...
Read More »
Mass Flow Meter measures 13 different gases.
C-LA10-B Series measures differential pressure, absolute pressure, and temperature within laminar flow region to determine mass flow. Measurement range is 0.5 ccm to 1,000 lpm FS. Display shows mass flow, volumetric flow, temperature, and absolute pressure simultaneously. Pushbutton lets user select primary display and gas of interest, adjust meter response time, or tare meter to zero flow. Meter...
Read More »
Flow Sensor provides dosing control.
Model UB45-A utilizes paddle wheel design to measure continuous flows of solid-free liquids. Three body material choices and several connection options allow use of meter in neutral and slightly aggressive fluid media. Measuring range is 1.0-33 fps in pipe diameters from Ã-½-2 in. When paired with electronic modules, Model UB45-A offers flow indicator, flow transmitter, flow switch, or batch...
Read More »
Flow Meter measures very low flows.
Series C-OK45-DL turbine flow meter uses pelton-wheel principle to measure flow of water and other low-viscosity liquids. Flow ranges are from 0.24-11.1 gph to 0.8-80 gph and accuracy is Ã-
Read More »
Flow Meter clamps on 1/2 to 2 in. diameter pipes.
FloCat C-YD50-C Compact Ultrasonic Transit Time Clamp-on Flow Meter measures liquids containing less than 40% total suspended solids or aeration. Non-invasive unit is offered with or without local display. It provides 4-20 mA analog output and choice of simulated turbine meter or TTL-pulse frequency output, allowing direct interface to data collection systems. UltraLink WindowsÃ-®-based...
Read More »
In-Line Turbine Flow Meters use one moving part.
Series C-ES45-C 2-8 in. flow meters use 1 precision-machined helical rotor as only moving part. Rotation is electronically detected and processed. Jewel bearings and polished tungsten-carbide shafts minimize friction. Available with blind pulse or 4-20 mA output, units are provided with individually calibrated turbine meters. Modular electronics can be meter- or remote-mounted for transmitting...
Read More »
Flow Switch protects against flow variation.
Vane operated C-WD15-S0 is magnetically actuated and supplied with field adjustable multi-layer vanes for installation in pipes from 1 1/2 to 20 in. Unit fits directly into pipeline tee, thredolet, or flange and meets NEMA-4 watertight construction. It is explosion proof and withstands pressures to 2,000 psig. There are no bellows, springs, or seals to fail. C-WD15-S0 is suitable for fluids and...
Read More »
Turbine Meter offers low flow measurement.
C-OH45-A Low Flow Turbine Meter is based on pelton wheel-like rotor and features 316 stainless steel housing and self-lubricating ball bearings. It offers flow measurement for clean, low and moderate viscosity liquids in 12 overlapping ranges from 0.015 to 3.00 gpm, with accuracy of +/-1% (after linearization) over 10:1 flow range. Unit has max pressure rating of 1,000 psi and temperature range...
Read More »
Mass Flow Meter measures 13 different gases.
C-LA10-B Series measures differential pressure, absolute pressure, and temperature within laminar flow region to determine mass flow. Measurement range is 0.5 ccm to 1,000 lpm FS. Display shows mass flow, volumetric flow, temperature, and absolute pressure simultaneously. Pushbutton lets user select primary display and gas of interest, adjust meter response time, or tare meter to zero flow. Meter...
Read More »