Kepco Inc.

DC Power Supplies offer 2,400 W of stable, controllable power.
Electrical Equipment & Systems

DC Power Supplies offer 2,400 W of stable, controllable power.

Housed in standard 1U package, Series KLR includes 5 models from 20–300 V with input- of 180–264 Vac, single phase. Units feature GPIB, RS232, and isolated analog programming as standard. Ethernet control is available as factory-installed option. Power supplies are suited for aerospace and satellite test, telecom and IT, automatic test equipment, factory automation,- thermal process...

Read More »
Kepco Offers Enhancements to Its Electronic Loads
Construction Equipment and Supplies

Kepco Offers Enhancements to Its Electronic Loads

Kepco is pleased to announce several product enhancements to its popular EL series of 1 to 5 Kilowatt single and dual channel electronic loads: CE MARK for LVD and EMC directives Increased current capability of all low voltage models up to 800 Amps at 5 Kilowatts Transient capability, 50 microseconds to 10 seconds Repeating transients, repeating every 100 microseconds to 10 seconds from 2 to...

Read More »
Programmable DC Power Supplies include 1,500 and 3,000 W models.
Electrical Equipment & Systems

Programmable DC Power Supplies include 1,500 and 3,000 W models.

Consisting of automatic crossover, low-profile power supplies, KLN series includes 1U, full-rack package at 1,500 W and- 2U, full-rack package at 3,000 W. Total of 13 voltage-current combinations are offered at each power level. Output voltages range from 0–6 V to 0–600 V, and output currents range from 0–400 A down to 0–1.25 A. Using optional socket board, up to- 5 identical units may...

Read More »
Programmable Power Supply delivers 750 W of stable DC power.
Electrical Equipment & Systems

Programmable Power Supply delivers 750 W of stable DC power.

Housed in 1U, half-rack package, Model KLN comes in 11 models ranging from 0-6 V/0-100 A to 0-600 V/0-1.25 A. Programming of voltage, current, and limits may be achieved from front panel controls, by remote analog means, or via RS 485 digital control. Equipped with speed-controlled fan that limits acoustic noise, Model KLN is suitable for ATE, factory automation, QC testing, burn-in, and thermal...

Read More »
Electrical Equipment & Systems

Four Quadrant Power Supplies suit solar cells and panels.

Available in 200 and 400 W models, Series BOP capacitive load power supplies can linearly pass through zero to produce outputs of either positive or negative polarity, and function in 4 quandrants of orthogonal voltage-current area as either source or sink. Operating in voltage or voltage limit mode for capacitive loads up to 10 mF, supplies are also stable when driving any R-C parallel...

Read More »
DC Electronic Loads feature modular architecture.
Construction Equipment and Supplies

DC Electronic Loads feature modular architecture.

Air-cooled EL Series, with power ratings from 1-5 kW, supports constant voltage, current, power, resistance, and conductance modes. In addition to 20 standard single-channel models with max test capabilities of 50, 200, 400, and 600 V, series offers dual-channel models with 2 completely independent loads in single chassis in any combination of power up to 4 kW max. Remote isolated analog...

Read More »
Bipolar Operational Amplifier can source or sink up to 125 A.
Communication Systems & Equipment

Bipolar Operational Amplifier can source or sink up to 125 A.

High current, 1 kW BOP 6-125MG can perform in Current mode-Voltage limit, as well in Voltage mode-Current limit, having a current-voltage rectangular characteristic. Up to 5 units may be operated in parallel for source-sink capability of up to 625 A at 0-6 V, and up to 3 units can be connected in series for up to 125 A at 0-18 V. Product is suited for many complex applications, such as battery...

Read More »
Power Supplies suit magnet and motor applications.
Electrical Equipment & Systems

Power Supplies suit magnet and motor applications.

Available in 200 W (except BOP 200-1M) and 400 W models, 4-quadrant Series BOP is optimized for driving inductive loads and suitable for range of applications. Models are designed to operate in stable manner in Current or Current Limit Mode for loads up to 1 H and are also stable with any R-L series load combination. In current mode, bandwidth is reduced modestly when operating with resistive...

Read More »
DC Power Supplies offer 2,400 W of stable, controllable power.
Electrical Equipment & Systems

DC Power Supplies offer 2,400 W of stable, controllable power.

Housed in standard 1U package, Series KLR includes 5 models from 20–300 V with input- of 180–264 Vac, single phase. Units feature GPIB, RS232, and isolated analog programming as standard. Ethernet control is available as factory-installed option. Power supplies are suited for aerospace and satellite test, telecom and IT, automatic test equipment, factory automation,- thermal process...

Read More »
Kepco Offers Enhancements to Its Electronic Loads
Construction Equipment and Supplies

Kepco Offers Enhancements to Its Electronic Loads

Kepco is pleased to announce several product enhancements to its popular EL series of 1 to 5 Kilowatt single and dual channel electronic loads: CE MARK for LVD and EMC directives Increased current capability of all low voltage models up to 800 Amps at 5 Kilowatts Transient capability, 50 microseconds to 10 seconds Repeating transients, repeating every 100 microseconds to 10 seconds from 2 to...

Read More »
Programmable DC Power Supplies include 1,500 and 3,000 W models.
Electrical Equipment & Systems

Programmable DC Power Supplies include 1,500 and 3,000 W models.

Consisting of automatic crossover, low-profile power supplies, KLN series includes 1U, full-rack package at 1,500 W and- 2U, full-rack package at 3,000 W. Total of 13 voltage-current combinations are offered at each power level. Output voltages range from 0–6 V to 0–600 V, and output currents range from 0–400 A down to 0–1.25 A. Using optional socket board, up to- 5 identical units may...

Read More »
Programmable Power Supply delivers 750 W of stable DC power.
Electrical Equipment & Systems

Programmable Power Supply delivers 750 W of stable DC power.

Housed in 1U, half-rack package, Model KLN comes in 11 models ranging from 0-6 V/0-100 A to 0-600 V/0-1.25 A. Programming of voltage, current, and limits may be achieved from front panel controls, by remote analog means, or via RS 485 digital control. Equipped with speed-controlled fan that limits acoustic noise, Model KLN is suitable for ATE, factory automation, QC testing, burn-in, and thermal...

Read More »
Electrical Equipment & Systems

Four Quadrant Power Supplies suit solar cells and panels.

Available in 200 and 400 W models, Series BOP capacitive load power supplies can linearly pass through zero to produce outputs of either positive or negative polarity, and function in 4 quandrants of orthogonal voltage-current area as either source or sink. Operating in voltage or voltage limit mode for capacitive loads up to 10 mF, supplies are also stable when driving any R-C parallel...

Read More »
DC Electronic Loads feature modular architecture.
Construction Equipment and Supplies

DC Electronic Loads feature modular architecture.

Air-cooled EL Series, with power ratings from 1-5 kW, supports constant voltage, current, power, resistance, and conductance modes. In addition to 20 standard single-channel models with max test capabilities of 50, 200, 400, and 600 V, series offers dual-channel models with 2 completely independent loads in single chassis in any combination of power up to 4 kW max. Remote isolated analog...

Read More »
Bipolar Operational Amplifier can source or sink up to 125 A.
Communication Systems & Equipment

Bipolar Operational Amplifier can source or sink up to 125 A.

High current, 1 kW BOP 6-125MG can perform in Current mode-Voltage limit, as well in Voltage mode-Current limit, having a current-voltage rectangular characteristic. Up to 5 units may be operated in parallel for source-sink capability of up to 625 A at 0-6 V, and up to 3 units can be connected in series for up to 125 A at 0-18 V. Product is suited for many complex applications, such as battery...

Read More »
Power Supplies suit magnet and motor applications.
Electrical Equipment & Systems

Power Supplies suit magnet and motor applications.

Available in 200 W (except BOP 200-1M) and 400 W models, 4-quadrant Series BOP is optimized for driving inductive loads and suitable for range of applications. Models are designed to operate in stable manner in Current or Current Limit Mode for loads up to 1 H and are also stable with any R-L series load combination. In current mode, bandwidth is reduced modestly when operating with resistive...

Read More »

All Topics