Galil Motion Control, Inc.
Rocklin, CA 95765
Latest EDD-3701x EtherCAT Motor Controlling Drives have Multiple Digital and Analog Outputs
EDD-3701x EtherCAT Drives are control brushed, brushless, steppers, and microstepping motors. Units come with 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. The drives can be configured via EDD-3701x’s USB port using GDK software with the help of its configuration tool process. Units come in a 3.9 x 5.0 x 1.5 in. form factor and can be operated in Cyclic Synchronous...
Read More »
Galil Design Kit increases the performance of motion control systems.
Galil Design Software Kit offers communication between Galil's motion controllers and PLCs. This software enables the customer in simplifying troubleshooting and tuning process.GDK contains scope, tuner, terminal, editor, viewer and setup tools. Tuner option helps in optimizing system’s performance, editor tool writes, saves and executes application programs, setup tool reads, edits, saves and...
Read More »
Motion Controller integrates 1.4 A per phase stepper drive.
Measuring 3.9 x 5.0 x 1.5 in., DMC-30016 contains 30 V stepper amplifier that drives 2-phase bipolar stepper motor in full-step, half-step, -¼ step, or 1/16 step. Single-axis controller is user-configurable from 0.5–1.4 A per phase in 10 mA increments at 12–30 Vdc. It provides 125 ms servo loop update, 15 MHz encoder frequency, and 3 MHz stepper pulse output. Other features include PID...
Read More »
Intelligent I/O Controller features 2 Ethernet ports.
RIO-47142 Pocket PLC includes internal switch with- 2 Ethernet ports for daisy-chaining multiple RIO units, allowing management of unlimited- I/O without external Ethernet switch. Each self-contained unit provides 32 optically isolated digital inputs and outputs as well as 16 analog inputs and outputs. Using RISC processor for handling of I/O and- logic, controller also- offers on-board...
Read More »Ethernet Motion Controller suits single-axis applications.
Housed in 3.9 x 5.0 x 1.5 in. package, DMC-300xx Series combines motion controller and 800 W sine drive for driving brushless servo motors at 20-80 Vdc, up to 10 A continuous, 15 A peak. Unit is also available as controller-only model which can be connected to stepper or servo motor amplifier of any power range. Equipped with 32-bit RISC processor, controller features 125 -µsec servo loop update...
Read More »
Ethernet Motion Controller includes USB 2.0 and RS232 ports.
Operating standalone or via PC with Ethernet 10/100Base-T or USB, DMC-41x3 has 16 optically isolated I/O for 1-4 axis models and 32 I/O for 5-8 axis models. Each axis is configurable for stepper or servo motor operation. Also, 8 analog inputs are provided in addition to optically isolated forward and reverse limits and home input for each axis. Operated from 20-60 Vdc power source, unit has PID...
Read More »
DMC-12x0 - PC/104 Optima Motion Controllers, 1-8 Axes
For new applications, Galil recommends the new generation, Accelera series DMC-18x6 PCI controllers. The DMC-12x0 PC/104 bus motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. Designed to fit in an embedded PC/104 system, the DMC-12x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any...
Read More »
DMC-18x0 - PCI Optima Motion Controllers, 1-8 Axes
For new applications, Galil recommends the new generation, Accelera series DMC-18x6. The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear...
Read More »
Interface Boards suit temperature control applications.
Enabling RIO to interface with thermocouples and RTDs (Resistive Temperature Device), SCB-48x06 signal conditioning boards connect directly to 26-pin d-sub connector of RIO-47120 and are oriented vertically from RIO connector. Model SCB-48206 interfaces to 6 RTDs and SCB-48306 interfaces to 6 thermocouples. Features include arithmetic and logical processing, data logging, process control loops,...
Read More »Galil Motion Controllers Used in Waterjet Machines from CNC Machines International
April 22, 2009 When water is concentrated into a high-pressure stream shot from a waterjet at 60,000 psi, it can cut and shape a wide array of materials like cloth, foam, glass, plastic, and rubber as fast as 100 ft. per minute. Water can even cut through harder materials like wood, granite, stone, aluminum and steel. One application of waterjet cutters is to cut designs into artificial turf and...
Read More »
Latest EDD-3701x EtherCAT Motor Controlling Drives have Multiple Digital and Analog Outputs
EDD-3701x EtherCAT Drives are control brushed, brushless, steppers, and microstepping motors. Units come with 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. The drives can be configured via EDD-3701x’s USB port using GDK software with the help of its configuration tool process. Units come in a 3.9 x 5.0 x 1.5 in. form factor and can be operated in Cyclic Synchronous...
Read More »
Galil Design Kit increases the performance of motion control systems.
Galil Design Software Kit offers communication between Galil's motion controllers and PLCs. This software enables the customer in simplifying troubleshooting and tuning process.GDK contains scope, tuner, terminal, editor, viewer and setup tools. Tuner option helps in optimizing system’s performance, editor tool writes, saves and executes application programs, setup tool reads, edits, saves and...
Read More »
Motion Controller integrates 1.4 A per phase stepper drive.
Measuring 3.9 x 5.0 x 1.5 in., DMC-30016 contains 30 V stepper amplifier that drives 2-phase bipolar stepper motor in full-step, half-step, -¼ step, or 1/16 step. Single-axis controller is user-configurable from 0.5–1.4 A per phase in 10 mA increments at 12–30 Vdc. It provides 125 ms servo loop update, 15 MHz encoder frequency, and 3 MHz stepper pulse output. Other features include PID...
Read More »
Intelligent I/O Controller features 2 Ethernet ports.
RIO-47142 Pocket PLC includes internal switch with- 2 Ethernet ports for daisy-chaining multiple RIO units, allowing management of unlimited- I/O without external Ethernet switch. Each self-contained unit provides 32 optically isolated digital inputs and outputs as well as 16 analog inputs and outputs. Using RISC processor for handling of I/O and- logic, controller also- offers on-board...
Read More »Ethernet Motion Controller suits single-axis applications.
Housed in 3.9 x 5.0 x 1.5 in. package, DMC-300xx Series combines motion controller and 800 W sine drive for driving brushless servo motors at 20-80 Vdc, up to 10 A continuous, 15 A peak. Unit is also available as controller-only model which can be connected to stepper or servo motor amplifier of any power range. Equipped with 32-bit RISC processor, controller features 125 -µsec servo loop update...
Read More »
Ethernet Motion Controller includes USB 2.0 and RS232 ports.
Operating standalone or via PC with Ethernet 10/100Base-T or USB, DMC-41x3 has 16 optically isolated I/O for 1-4 axis models and 32 I/O for 5-8 axis models. Each axis is configurable for stepper or servo motor operation. Also, 8 analog inputs are provided in addition to optically isolated forward and reverse limits and home input for each axis. Operated from 20-60 Vdc power source, unit has PID...
Read More »
DMC-12x0 - PC/104 Optima Motion Controllers, 1-8 Axes
For new applications, Galil recommends the new generation, Accelera series DMC-18x6 PCI controllers. The DMC-12x0 PC/104 bus motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. Designed to fit in an embedded PC/104 system, the DMC-12x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any...
Read More »
DMC-18x0 - PCI Optima Motion Controllers, 1-8 Axes
For new applications, Galil recommends the new generation, Accelera series DMC-18x6. The DMC-18x0 PCI motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-18x0 controller accommodates 1- through 8-axis formats and allows control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear...
Read More »
Interface Boards suit temperature control applications.
Enabling RIO to interface with thermocouples and RTDs (Resistive Temperature Device), SCB-48x06 signal conditioning boards connect directly to 26-pin d-sub connector of RIO-47120 and are oriented vertically from RIO connector. Model SCB-48206 interfaces to 6 RTDs and SCB-48306 interfaces to 6 thermocouples. Features include arithmetic and logical processing, data logging, process control loops,...
Read More »Galil Motion Controllers Used in Waterjet Machines from CNC Machines International
April 22, 2009 When water is concentrated into a high-pressure stream shot from a waterjet at 60,000 psi, it can cut and shape a wide array of materials like cloth, foam, glass, plastic, and rubber as fast as 100 ft. per minute. Water can even cut through harder materials like wood, granite, stone, aluminum and steel. One application of waterjet cutters is to cut designs into artificial turf and...
Read More »