Jaeco Fluid Systems, Inc.

Jaeco Develops Pump That Meters Two Different Volumes Simultaneously
Fluid & Gas Flow Equipment

Jaeco Develops Pump That Meters Two Different Volumes Simultaneously

Jaeco Fluid Systems, Inc. has successful developed a JaecoPak Packed Plunger pump that meters two different volumes of two different high viscosity materials at the same time (in phase). The pump was developed for a major producer of fiberglass pipe and other fiberglass products to pump metered amounts of both resin and catalyst simultaneously. Special heavy-duty valves are employed to handle the...

Read More »
Custom Stainless Steel Check Valves
Fluid & Gas Flow Equipment

Custom Stainless Steel Check Valves

Jaeco stainless steel Poppet and Ball check valves can be customized to meet the requirements of specific applications. Normally available in 1/4, 3/8 , 1/2", 3/4" and 1" IPS sizes with pressure breaks of 2 or 10 PSI, custom valves are available in a wide range of additional sizes and with different break pressures. Poppet valves come standard with Viton(TM) or Teflon(TM) O-rings. Ball valves...

Read More »
Hazardous Area Stainless Steel Compression Fittings
Fluid & Gas Flow Equipment

Hazardous Area Stainless Steel Compression Fittings

Jaeco Grip-Seal® stainless steel coupling, tee and 90° elbow compression pipe and tube fittings are quickly installed, reusable and require no line purge, open flame or special tools making them ideally suited for hazardous areas. Grip-Seal fittings have a 100% full-flow area with no crevices where fluid can stagnate. Fluid contacts only the Teflon(TM) seal in straight fittings and...

Read More »
Fluid & Gas Flow Equipment

Packed Plunger Metering Pumps That Can Be Run Dry

Jaeco Hi-Flo(TM) packed plunger, positive displacement, metering pumps can be run dry without pump failure. Hi-Flo pumps have been providing heavy-duty, virtually maintenance-free, accurate metering of both chemicals and solutions at higher flow rates and/or pressures for over fifty-five years. Available in both simplex and duplex models, pump capacities range from 20 to 682 GPH at pressures up...

Read More »
Diaphragm Metering Pumps are hydraulically actuated.
Fluid & Gas Flow Equipment

Diaphragm Metering Pumps are hydraulically actuated.

JaecoFram 1(TM) pumps feature heavy-duty, continuously lubricated gear reduction system as well as separate chambers for hydraulic fluid and gear lubricant. Hydraulic actuation of diaphragm minimizes fatigue and units also feature built-in hydraulic relief valve. Devices offer capacities from 0.8-56 gph at pressures up to 1,200 psi with accuracy of 0.5% at steady state. Capacity is manually...

Read More »
Packed Plunger Metering Pump is designed for longevity.
Fluid & Gas Flow Equipment

Packed Plunger Metering Pump is designed for longevity.

Used for metering of chemicals and solutions, JaecoPak(TM) pumps are constructed with continuously lubricated bronze gears immersed in oil, heavy-duty cast iron housings, and 316 stainless steel or Alloy 20 liquid ends. Units are available in simplex and duplex, field-convertible models with capacities from 0.38-150 gph at pressures to 2,000 psi and steady state accuracy of ±0.5%. Capacity...

Read More »
Metering Pumps offer adjustable capacity from 0-100%.
Fluid & Gas Flow Equipment

Metering Pumps offer adjustable capacity from 0-100%.

Available in simplex and duplex models, Hi-Flo(TM) packed plunger, positive displacement pumps offer capacities from 20-682 gph at pressures up to 7,200 psi with accuracy of ±0.5% at steady state. Single ball check valve on both suction and discharge side of pump provide accurate metering. Duplex pump pistons are normally 180° out of phase, but can be synchronized so that 2 fluids can...

Read More »
Ball Check and Poppet Valves are made of stainless steel.
Fluid & Gas Flow Equipment

Ball Check and Poppet Valves are made of stainless steel.

Stainless steel poppet and ball check valves, available in sizes from Â-¼-1 in. ips, are spring loaded for 2-10 psi and rated for pressures to 2,500 psi. While poppet valves have temperature range of -15 to +400°F and come standard with Viton(TM) or Teflon® O-rings, ball valves have temperature range of -20 to +650°F and come with 316 SS ball standard. Other O-ring...

Read More »
Diaphragm Metering Pump has separate hydraulic/lube chambers.
Fluid & Gas Flow Equipment

Diaphragm Metering Pump has separate hydraulic/lube chambers.

Available with separate chambers for hydraulic fluid and gear lubricant, hydraulically actuated JaecoFram 1(TM) performs accurate, leak-proof metering of difficult-to-handle liquids. Pump utilizes heavy-duty, totally immersed in oil, gear reducer system and built-in hydraulic relief valve. Available in simplex and duplex models, capacities range from 0.8 to 56 gph (max). Capacity is adjustable...

Read More »
Metering Pump has tamper-resistant flow adjustment.
Fluid & Gas Flow Equipment

Metering Pump has tamper-resistant flow adjustment.

JaecoPak(TM) packed-plunger pump is adjustable from 0 to 100% by varying piston stroke length. It is available in simplex and duplex models, and in pump capacities from 0.38 to 150 gph. Single-ball check valve provides accurate metering and fast response. Liquid ends are available in 316 stainless steel or Carpenter alloy 20 from stock. Valve ball turns with fluid flow, constantly presenting new...

Read More »
Jaeco Develops Pump That Meters Two Different Volumes Simultaneously
Fluid & Gas Flow Equipment

Jaeco Develops Pump That Meters Two Different Volumes Simultaneously

Jaeco Fluid Systems, Inc. has successful developed a JaecoPak Packed Plunger pump that meters two different volumes of two different high viscosity materials at the same time (in phase). The pump was developed for a major producer of fiberglass pipe and other fiberglass products to pump metered amounts of both resin and catalyst simultaneously. Special heavy-duty valves are employed to handle the...

Read More »
Custom Stainless Steel Check Valves
Fluid & Gas Flow Equipment

Custom Stainless Steel Check Valves

Jaeco stainless steel Poppet and Ball check valves can be customized to meet the requirements of specific applications. Normally available in 1/4, 3/8 , 1/2", 3/4" and 1" IPS sizes with pressure breaks of 2 or 10 PSI, custom valves are available in a wide range of additional sizes and with different break pressures. Poppet valves come standard with Viton(TM) or Teflon(TM) O-rings. Ball valves...

Read More »
Hazardous Area Stainless Steel Compression Fittings
Fluid & Gas Flow Equipment

Hazardous Area Stainless Steel Compression Fittings

Jaeco Grip-Seal® stainless steel coupling, tee and 90° elbow compression pipe and tube fittings are quickly installed, reusable and require no line purge, open flame or special tools making them ideally suited for hazardous areas. Grip-Seal fittings have a 100% full-flow area with no crevices where fluid can stagnate. Fluid contacts only the Teflon(TM) seal in straight fittings and...

Read More »
Fluid & Gas Flow Equipment

Packed Plunger Metering Pumps That Can Be Run Dry

Jaeco Hi-Flo(TM) packed plunger, positive displacement, metering pumps can be run dry without pump failure. Hi-Flo pumps have been providing heavy-duty, virtually maintenance-free, accurate metering of both chemicals and solutions at higher flow rates and/or pressures for over fifty-five years. Available in both simplex and duplex models, pump capacities range from 20 to 682 GPH at pressures up...

Read More »
Diaphragm Metering Pumps are hydraulically actuated.
Fluid & Gas Flow Equipment

Diaphragm Metering Pumps are hydraulically actuated.

JaecoFram 1(TM) pumps feature heavy-duty, continuously lubricated gear reduction system as well as separate chambers for hydraulic fluid and gear lubricant. Hydraulic actuation of diaphragm minimizes fatigue and units also feature built-in hydraulic relief valve. Devices offer capacities from 0.8-56 gph at pressures up to 1,200 psi with accuracy of 0.5% at steady state. Capacity is manually...

Read More »
Packed Plunger Metering Pump is designed for longevity.
Fluid & Gas Flow Equipment

Packed Plunger Metering Pump is designed for longevity.

Used for metering of chemicals and solutions, JaecoPak(TM) pumps are constructed with continuously lubricated bronze gears immersed in oil, heavy-duty cast iron housings, and 316 stainless steel or Alloy 20 liquid ends. Units are available in simplex and duplex, field-convertible models with capacities from 0.38-150 gph at pressures to 2,000 psi and steady state accuracy of ±0.5%. Capacity...

Read More »
Metering Pumps offer adjustable capacity from 0-100%.
Fluid & Gas Flow Equipment

Metering Pumps offer adjustable capacity from 0-100%.

Available in simplex and duplex models, Hi-Flo(TM) packed plunger, positive displacement pumps offer capacities from 20-682 gph at pressures up to 7,200 psi with accuracy of ±0.5% at steady state. Single ball check valve on both suction and discharge side of pump provide accurate metering. Duplex pump pistons are normally 180° out of phase, but can be synchronized so that 2 fluids can...

Read More »
Ball Check and Poppet Valves are made of stainless steel.
Fluid & Gas Flow Equipment

Ball Check and Poppet Valves are made of stainless steel.

Stainless steel poppet and ball check valves, available in sizes from Â-¼-1 in. ips, are spring loaded for 2-10 psi and rated for pressures to 2,500 psi. While poppet valves have temperature range of -15 to +400°F and come standard with Viton(TM) or Teflon® O-rings, ball valves have temperature range of -20 to +650°F and come with 316 SS ball standard. Other O-ring...

Read More »
Diaphragm Metering Pump has separate hydraulic/lube chambers.
Fluid & Gas Flow Equipment

Diaphragm Metering Pump has separate hydraulic/lube chambers.

Available with separate chambers for hydraulic fluid and gear lubricant, hydraulically actuated JaecoFram 1(TM) performs accurate, leak-proof metering of difficult-to-handle liquids. Pump utilizes heavy-duty, totally immersed in oil, gear reducer system and built-in hydraulic relief valve. Available in simplex and duplex models, capacities range from 0.8 to 56 gph (max). Capacity is adjustable...

Read More »
Metering Pump has tamper-resistant flow adjustment.
Fluid & Gas Flow Equipment

Metering Pump has tamper-resistant flow adjustment.

JaecoPak(TM) packed-plunger pump is adjustable from 0 to 100% by varying piston stroke length. It is available in simplex and duplex models, and in pump capacities from 0.38 to 150 gph. Single-ball check valve provides accurate metering and fast response. Liquid ends are available in 316 stainless steel or Carpenter alloy 20 from stock. Valve ball turns with fluid flow, constantly presenting new...

Read More »

All Topics