Axiomatic Technologies Corp.

Dual Valve Controller complies with SAE CAN J1939 standard.
Agricultural & Farming Products

Dual Valve Controller complies with SAE CAN J1939 standard.

Extending machine control networks, AX022400 interfaces with 2 fully independent universal command inputs that are selectable as voltage, current, resistive, frequency, RPM, PWM, or digital types. Solution also provides 2 independent, software-controlled outputs up to 3 A that are selectable as proportional current, hotshot digital, PWM duty cycle, proportional voltage, or On/Off digital types....

Read More »
Signal Conditioner connects different devices in control system.
Electronic Components & Devices

Signal Conditioner connects different devices in control system.

By providing signal conversion and isolation between 2 incompatible signals, AX130200 can assist system integrator in connecting several different devices in control system. This model, in addition to converting PWM signal between 50 Hz and 50 kHz into 0-20 mA current signal, also provides full isolation between input, output, and power supply. Supplied in IP40 DIN rail housing, conditioner...

Read More »
Agricultural & Farming Products

Drive Hydraulic Valves Cost Effectively from Your Machine CAN Control Network with the New Axiomatic Controller, the CAN Bus to 1 Valve Driver

August 26, 2010 - Mississauga, Ontario, Canada- Read analog sensors with the 1 Universal Signal Input with CAN I/O controller. Axiomatic announces the release of a new SAE J1939 or CANopen® valve driver and I/O control, part numbers AX022200 and AX030530 respectively. These controllers are part of a growing line of low cost and compact rugged distributed I/O controls packaged for harsh...

Read More »
Agricultural & Farming Products

The Axiomatic 20 or 4 Thermocouple (TC) and 8 RTD Scanners Send Engine Low or High Temperature Warnings, Detect High Temperature Shutdowns and Sense TC or RTD Open Circuit Conditions

The module communicates over CANopen® to the control system of an industrial genset. Axiomatic announces the release of three new CANopen® engine management controls, part numbers AXTC20CO, AXTC4CO and AXRTD8CO respectively. These controllers are part of a growing line of low cost and rugged distributed I/O controls for CAN networks and packaged for harsh operating environments....

Read More »
Hydraulic Valve Control suits off-highway machinery.
Agricultural & Farming Products

Hydraulic Valve Control suits off-highway machinery.

Designed to control 5 proportional or on/off solenoid valves up to 2.5 A, AX021900 8:5 Valve Controller accepts voltage, current, resistance, frequency, digital, and PWM from 6 universal inputs. Unit offers user-configurable PID capability and flexible user programming for application-specific control logic via CAN-based Electronic Assistant®. With IP67 packaging and connectors, controller...

Read More »
Machine Control Interface targets positioning applications.
Agricultural & Farming Products

Machine Control Interface targets positioning applications.

Suited for off-highway excavators, backhoes, pile drivers, or bulldozers, Bucket Positioning System (BPS) provides continuous assessment of bucket, blade or attachment position as part of complete 2D/3D OEM machine control system. It interfaces with CANopen® devices for angle sensing, and offers fast data exchange with machine control display via Ethernet. Features include operating range...

Read More »
Add Legacy Controls Cost Effectively to Your CAN Network with the New Axiomatic Controllers, CAN - 4 Analog Signal and CAN - 1 Analog Signal
Agricultural & Farming Products

Add Legacy Controls Cost Effectively to Your CAN Network with the New Axiomatic Controllers, CAN - 4 Analog Signal and CAN - 1 Analog Signal

Read analog sensors with the 1 Universal Signal Input - CAN control. Axiomatic announces the release of a new SAE J1939 or CANopen® I/O control with 4 analog signal outputs, part number AX030500 and AX030501 respectively. These controllers are part of a growing line of low cost and compact rugged distributed I/O controls packaged for harsh operating environments. Other new models include a...

Read More »
Universal Inclinometer features CANopen networking.
Sensors, Monitors & Transducers

Universal Inclinometer features CANopen networking.

Providing output via CAN bus, RS232 port, or as three 0-5 V signals, IP67 rated AX06025X series measures inclination angle in 2 orthogonal sensing directions in range up to ±90Â-º, or in one direction ±180º when installed vertically. Series also supports SAE J1939 CAN interface (AX0602XX), which is configurable using Axiomatic Electronic Assistant® programming tool....

Read More »
CAN Bus I/O Control is programmable via PC-based software.
Agricultural & Farming Products

CAN Bus I/O Control is programmable via PC-based software.

Featuring IP67-rated packaging and connectors, AX030500 is programmable via Electronic Assistant®, which runs on any PC with Windows® 2000 or higher, finds all devices on bus, and recognizes Axiomatic controls. There are 4 independent analog signal outputs, and analog signals are user-selectable for any range within 0-5, 0-10, ±5, and ±10 V or 0-20, 4-20, and ±20 mA...

Read More »
Universal Inclinometer measures ±90° or 360° rotation.
Sensors, Monitors & Transducers

Universal Inclinometer measures ±90° or 360° rotation.

Packaged for IP67 rating with M12x1 connectors, Model AX060200 features CANbus, RS-232, and analog output ports for multiple functionality. Inclinometer is designed to measure inclination angles in 2 orthogonal sensing directions X and Y in range up to ±90Â-º. If vertically installed, it can measure inclination angle in one sensing direction in ±180º range. Angles are...

Read More »
Dual Valve Controller complies with SAE CAN J1939 standard.
Agricultural & Farming Products

Dual Valve Controller complies with SAE CAN J1939 standard.

Extending machine control networks, AX022400 interfaces with 2 fully independent universal command inputs that are selectable as voltage, current, resistive, frequency, RPM, PWM, or digital types. Solution also provides 2 independent, software-controlled outputs up to 3 A that are selectable as proportional current, hotshot digital, PWM duty cycle, proportional voltage, or On/Off digital types....

Read More »
Signal Conditioner connects different devices in control system.
Electronic Components & Devices

Signal Conditioner connects different devices in control system.

By providing signal conversion and isolation between 2 incompatible signals, AX130200 can assist system integrator in connecting several different devices in control system. This model, in addition to converting PWM signal between 50 Hz and 50 kHz into 0-20 mA current signal, also provides full isolation between input, output, and power supply. Supplied in IP40 DIN rail housing, conditioner...

Read More »
Agricultural & Farming Products

Drive Hydraulic Valves Cost Effectively from Your Machine CAN Control Network with the New Axiomatic Controller, the CAN Bus to 1 Valve Driver

August 26, 2010 - Mississauga, Ontario, Canada- Read analog sensors with the 1 Universal Signal Input with CAN I/O controller. Axiomatic announces the release of a new SAE J1939 or CANopen® valve driver and I/O control, part numbers AX022200 and AX030530 respectively. These controllers are part of a growing line of low cost and compact rugged distributed I/O controls packaged for harsh...

Read More »
Agricultural & Farming Products

The Axiomatic 20 or 4 Thermocouple (TC) and 8 RTD Scanners Send Engine Low or High Temperature Warnings, Detect High Temperature Shutdowns and Sense TC or RTD Open Circuit Conditions

The module communicates over CANopen® to the control system of an industrial genset. Axiomatic announces the release of three new CANopen® engine management controls, part numbers AXTC20CO, AXTC4CO and AXRTD8CO respectively. These controllers are part of a growing line of low cost and rugged distributed I/O controls for CAN networks and packaged for harsh operating environments....

Read More »
Hydraulic Valve Control suits off-highway machinery.
Agricultural & Farming Products

Hydraulic Valve Control suits off-highway machinery.

Designed to control 5 proportional or on/off solenoid valves up to 2.5 A, AX021900 8:5 Valve Controller accepts voltage, current, resistance, frequency, digital, and PWM from 6 universal inputs. Unit offers user-configurable PID capability and flexible user programming for application-specific control logic via CAN-based Electronic Assistant®. With IP67 packaging and connectors, controller...

Read More »
Machine Control Interface targets positioning applications.
Agricultural & Farming Products

Machine Control Interface targets positioning applications.

Suited for off-highway excavators, backhoes, pile drivers, or bulldozers, Bucket Positioning System (BPS) provides continuous assessment of bucket, blade or attachment position as part of complete 2D/3D OEM machine control system. It interfaces with CANopen® devices for angle sensing, and offers fast data exchange with machine control display via Ethernet. Features include operating range...

Read More »
Add Legacy Controls Cost Effectively to Your CAN Network with the New Axiomatic Controllers, CAN - 4 Analog Signal and CAN - 1 Analog Signal
Agricultural & Farming Products

Add Legacy Controls Cost Effectively to Your CAN Network with the New Axiomatic Controllers, CAN - 4 Analog Signal and CAN - 1 Analog Signal

Read analog sensors with the 1 Universal Signal Input - CAN control. Axiomatic announces the release of a new SAE J1939 or CANopen® I/O control with 4 analog signal outputs, part number AX030500 and AX030501 respectively. These controllers are part of a growing line of low cost and compact rugged distributed I/O controls packaged for harsh operating environments. Other new models include a...

Read More »
Universal Inclinometer features CANopen networking.
Sensors, Monitors & Transducers

Universal Inclinometer features CANopen networking.

Providing output via CAN bus, RS232 port, or as three 0-5 V signals, IP67 rated AX06025X series measures inclination angle in 2 orthogonal sensing directions in range up to ±90Â-º, or in one direction ±180º when installed vertically. Series also supports SAE J1939 CAN interface (AX0602XX), which is configurable using Axiomatic Electronic Assistant® programming tool....

Read More »
CAN Bus I/O Control is programmable via PC-based software.
Agricultural & Farming Products

CAN Bus I/O Control is programmable via PC-based software.

Featuring IP67-rated packaging and connectors, AX030500 is programmable via Electronic Assistant®, which runs on any PC with Windows® 2000 or higher, finds all devices on bus, and recognizes Axiomatic controls. There are 4 independent analog signal outputs, and analog signals are user-selectable for any range within 0-5, 0-10, ±5, and ±10 V or 0-20, 4-20, and ±20 mA...

Read More »
Universal Inclinometer measures ±90° or 360° rotation.
Sensors, Monitors & Transducers

Universal Inclinometer measures ±90° or 360° rotation.

Packaged for IP67 rating with M12x1 connectors, Model AX060200 features CANbus, RS-232, and analog output ports for multiple functionality. Inclinometer is designed to measure inclination angles in 2 orthogonal sensing directions X and Y in range up to ±90Â-º. If vertically installed, it can measure inclination angle in one sensing direction in ±180º range. Angles are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers