Measurement Computing Corp.
Norton, MA 02766
Digital I/O Module enables remote monitoring and control.
Ethernet-based Measurement Advantage model E-PDISO16 offers PCI-based functionality with 16 isolated digital inputs, 500 Vdc isolation, and 16 form C relays with 6 A at 240 Vac/28 Vdc contact ratings. It can be distributed anywhere network connection and power exists. Users connect device to network at point of measurement and configure, monitor, and control device from anywhere else on network....
Read More »DAQ System provides alternative to PCI-based versions.
Measurement Advantage(TM) USB-PDISO8 expands PC capabilities by providing 8 isolated ac or dc inputs and 8 electromechanical relays in one system with USB expansion port. Inputs monitor 24 Vac or Vdc inputs, while output relays provide 6 A, Form C, SPDT outputs @ 120 Vac or 28 Vdc. Screw terminals facilitate field wiring to I/O. External power supply and USB cable are included. In addition to...
Read More »
Thermocouple Input Device offers 8 bits of digital I/O.
USB-based Model USB-TC provides 8 temperature inputs, 500 V isolation, and built-in ambient temperature sensing. Unit supports all common thermocouples and performs all linearization and cold-junction compensation. Internal measurement electronics accuracy exceeds temperature sensor accuracy, minimizing system error. Device includes TracerDAQ stripchart recorder/data logger software as well as...
Read More »CASE Software supports NI-DAQmx VIs.
Universal Library for LabVIEW v7.11 allows data acquisition (DAQ) application developers to use MCC boards with NI-DAQmx VIs in addition to Traditional NI-DAQ and MCC VIs. Able to be used with NI and MCC hardware in same application, software enables users to switch to MCC hardware without rewriting existing LabVIEW programs or learning new set of VIs.
Read More »Temperature Measurement Module supports 4 sensor types.
USB-based PMD-TEMP provides 8 bits of digital I/O and 8 temperature inputs, each supporting thermocouples, RTDs, thermistors, and semiconductor temperature sensors. Each channel monitors any supported input type, so users can mix and match sensor to measurement without additional signal conditioning. Unit includes TracerDAQ stripchart recorder/data logger software as well as SoftWIRE graphical...
Read More »Electromechanical Relay Modules are USB-controlled.
Model USB-ERB24 offers 24 channels of Form C relay with 6 A output ratings, while Model USB-ERB08 offers identical performance in 8-channel configuration. Both feature all-aluminum chassis suitable for benchtop or DIN rail. All wiring is brought out to full-sized screw terminals that are protected by latching connection cover. Each module provides built-in USB hub, implements daisy-chain power...
Read More »Module provides 96 bits of high-current digital I/O.
Logic-level USB-1096HFS interface offers 4 independent 24 bit DIO groups, each divided into two 8 bit ports and two 4 bit ports, and is based on discrete emulation of industry standard 82C55's mode zero. Outputs sink 64 mA or source 24 mA, and can drive external devices directly without additional buffering. Built-in USB hub allows additional interfaces to be added, and SoftWIRE graphical...
Read More »Analog Input Interface has sixteen 16-bit analog inputs.
With per-channel sampling rates to 50 kilosamples/sec, USB-1616FS features built-in USB hub and 8 bits of digital I/O. Housed in aluminum chassis, product implements daisy-chain power supply interconnection. All wiring is brought out to full-sized screw terminals protected by latching connection cover. Product comes with TracerDAQ stripchart recorder, oscilloscope, and data logger software...
Read More »Data Acquisition Board offers update rates to 100 kS/s.
Fully supported by LabVIEW, SoftWIRE, Agilent VEE, and MATLAB, PCI-DAS6031 board provides 64 single-ended or 32 differential channels of 16-bit analog input in addition to dual 16-bit analog outputs. Measurements on any of 14 input ranges may be taken at max sampling rate. Equipped with two 16-bit counter/timers, board has 8 digital, bi-directional I/O lines that can control relays and solenoids...
Read More »USB-Based DAQ Modules has 12-bit analog inputs.
Personal Measurement Device (PMD) PMD-1208FS provides 8 single-ended or 4 differential analog inputs, 12 bit resolution, and 8 software selectable input ranges. Capable of sample rates to 50 kilosamples/sec, product provides 2 channels of 12 bit analog output, one 32 bit counter, and 16 bits of digital I/O. Available with various mounting options, it measures 3.25 x 3.125 x 1 in. and includes...
Read More »