Little Giant Pump Co.
Oklahoma City, OK 73157
A/C Condensate Overflow Safety Switch prevents flooding.
By detecting downstream clogs and shutting off A/C unit, Little Giant® ACS-4 prevents flooding caused by clogged A/C condensate drains. It can be installed in vertical or horizontal, plugged or inline configurations and can also be wired to activate audible and/or visual alarms. Packaged with 1 x -¾ in. reducing bushing, -¾ in. plug for auxiliary drain pan outlets, and 6 ft lead wires, switch...
Read More »
Submersible Pump is energy efficient.
Energy Saving (ES) Series sump/effluent and sewage pumps are offered in 4 sizes ranging from 1/3 hp with 3/8 in. solids handling capability up to 6/10 hp with 2 in. solids handling. Pump performance ranges from 40-127 gpm at 10 feet. Permanent split capacitor electric motor provides high starting and running torque with energy-conserving low amperage draw. All models feature epoxy-coated cast...
Read More »
Sewage Removal Systems offer alarm option.
IAPMO approved Pit Plus(TM) systems come pre-assembled with 9S and 10S series sewage pumps, 16-bolt steel cover, 2 in. schedule 80 PVC discharge pipe, and check valve. Corrosion-resistant, bolt-on flange, 2-piece structural foam cover, available on 9 models, facilitates access to pump. Roto-molded polyethylene basin has circumferential ribs, external inlet hub, and anti-torque pump stops. Other...
Read More »
Ice Machine Pump suits retrofit applications.
RIM-U Universal Replacement Ice Machine Pump has 1/25 hp motor with upper and lower sealed ball bearings. Pump base, impellers, and discharge adapters are molded from NSF-approved thermoplastic, and all pump parts can be removed without hand tools. Discharge adaptors for -½, 5/8, -¾, and 1 in. tubing are included, along with Y-adaptor for 5/8 in. tubing and selection of 4 impeller sizes. Design...
Read More »
Evaporitive-Cooler Pumps replace OEM equipment.
Models CP1, CP2, and CP3 pumps provide 5,000-7,500, 7,500-15,000, and 15,000-21,000 cfm respectively. Mesh screen prevents debris from entering pump. Discharge adaptor locks into base to prevent slipping during operation. Units include concentric fan-cooled motor, corrosion-resistant, one-piece, steel motor shaft, 90° barbed elbow with bleed-off port, and moisture-proof windings. All have...
Read More »
Pump System replaces grinder pumps.
Model 20GH-RFK drop-in system replaces semi-positive displacement/progressive cavity systems. It is powered by 2 HP, 3450 RPM capacitor start, capacitor-run, single-phase, oil-filled motor. Pump offers maximum TDH of 110 ft, and maximum flow of 65 gpm. Cast-iron motor housing and volute are epoxy coated for corrosion resistance. Mechanical seal has ceramic, stationary face and carbon, rotating...
Read More »
Magnetic Drive Pump has stainless steel impeller.
Model TE-7-MD-SST magnetic drive pump can pump up to 52.5 gpm, liquid temperatures up to 250°F, and line pressures up to 150 psi. It offers leak-proof, seal-less magnetic drives, and is designed for in-line, non-submersible use. Fan-cooled, totally enclosed motor is thermally protected, and is available in 3/4 or 1-1/2 hp for use with specific gravities of up to 1.1 and 1.2 to 1.5, respectively.
Read More »
A/C Condensate Overflow Safety Switch prevents flooding.
By detecting downstream clogs and shutting off A/C unit, Little Giant® ACS-4 prevents flooding caused by clogged A/C condensate drains. It can be installed in vertical or horizontal, plugged or inline configurations and can also be wired to activate audible and/or visual alarms. Packaged with 1 x -¾ in. reducing bushing, -¾ in. plug for auxiliary drain pan outlets, and 6 ft lead wires, switch...
Read More »
Submersible Pump is energy efficient.
Energy Saving (ES) Series sump/effluent and sewage pumps are offered in 4 sizes ranging from 1/3 hp with 3/8 in. solids handling capability up to 6/10 hp with 2 in. solids handling. Pump performance ranges from 40-127 gpm at 10 feet. Permanent split capacitor electric motor provides high starting and running torque with energy-conserving low amperage draw. All models feature epoxy-coated cast...
Read More »
Sewage Removal Systems offer alarm option.
IAPMO approved Pit Plus(TM) systems come pre-assembled with 9S and 10S series sewage pumps, 16-bolt steel cover, 2 in. schedule 80 PVC discharge pipe, and check valve. Corrosion-resistant, bolt-on flange, 2-piece structural foam cover, available on 9 models, facilitates access to pump. Roto-molded polyethylene basin has circumferential ribs, external inlet hub, and anti-torque pump stops. Other...
Read More »
Ice Machine Pump suits retrofit applications.
RIM-U Universal Replacement Ice Machine Pump has 1/25 hp motor with upper and lower sealed ball bearings. Pump base, impellers, and discharge adapters are molded from NSF-approved thermoplastic, and all pump parts can be removed without hand tools. Discharge adaptors for -½, 5/8, -¾, and 1 in. tubing are included, along with Y-adaptor for 5/8 in. tubing and selection of 4 impeller sizes. Design...
Read More »
Evaporitive-Cooler Pumps replace OEM equipment.
Models CP1, CP2, and CP3 pumps provide 5,000-7,500, 7,500-15,000, and 15,000-21,000 cfm respectively. Mesh screen prevents debris from entering pump. Discharge adaptor locks into base to prevent slipping during operation. Units include concentric fan-cooled motor, corrosion-resistant, one-piece, steel motor shaft, 90° barbed elbow with bleed-off port, and moisture-proof windings. All have...
Read More »
Pump System replaces grinder pumps.
Model 20GH-RFK drop-in system replaces semi-positive displacement/progressive cavity systems. It is powered by 2 HP, 3450 RPM capacitor start, capacitor-run, single-phase, oil-filled motor. Pump offers maximum TDH of 110 ft, and maximum flow of 65 gpm. Cast-iron motor housing and volute are epoxy coated for corrosion resistance. Mechanical seal has ceramic, stationary face and carbon, rotating...
Read More »
Magnetic Drive Pump has stainless steel impeller.
Model TE-7-MD-SST magnetic drive pump can pump up to 52.5 gpm, liquid temperatures up to 250°F, and line pressures up to 150 psi. It offers leak-proof, seal-less magnetic drives, and is designed for in-line, non-submersible use. Fan-cooled, totally enclosed motor is thermally protected, and is available in 3/4 or 1-1/2 hp for use with specific gravities of up to 1.1 and 1.2 to 1.5, respectively.
Read More »